20 L, Solutions
-
Formaldehyde, 37%, Purified
Reagents®Concentration: 37% Composition: Water 48%, Formaldehyde 37%, Methyl Alcohol 15% Grade: Purified Boiling Point: Approximately 96°C Density: 1.07 Molecular Weight: 30.03 g/mol Color: Colorless liquid Physical State: Liquid Flash Point: 60°C Solubility Information: Miscible Shelf…
-
Ricca Synthetic Seawater
Ricca ChemicalThe Ricca Chemical synthetic sea water is composed of 95.87% water, 2.39% sodium chloride, 1.08% magnesium chloride hexahydrate, 0.15% calcium chloride dihydrate, 0.07% potassium chloride, 0.02% sodium bicarbonate, 0.01% potassium bromide, 0.00% strontium chloride hexahydrate, 0.00% boric acid,…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
LabChem 37% w/w ACS Formaldehyde
LabchemThe LabChem 37% w/w ACS formaldehyde in liquid form, is soluble in water, ethanol, methanol, ether and acetone. It is non-flammable and has irritating/pungent odor. Application: For Chemical Intermediate, Disinfectant, Laboratory Chemical
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Sodium Hydroxide, 30% (w/v)
Ricca ChemicalWe offer the largest offering of EPA solutions and standards available. Practically every solution and standard you could need to satisfy the EPA requirements are readily available. This product is certified as a reagent for the following test methods: Reference: EPA Method:…
-
-
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
-
The LabChem 0.01M ethylenediaminetetraacetic acid in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only Titrant for water hardness
-
The Exaxol acetate buffer features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only
-
Potassium hydroxide solution, volumetric, 0.5N in water
BeanTown ChemicalCAS: 1310-58-3 EC No: 215-181-3 MDL No: MFCD00003553 UN No: UN1814; Haz Class: 8; Packing Group: III Liquid Linear Formula: KOH MW: 56.11 Density (g/mL): 1.023
-
Ricca 0.9% (w/v) Sodium Chloride
Ricca ChemicalThe Ricca Chemical sodium chloride with a composition of 99.11% water and 0.89% sodium chloride, is suitable for use in plastic, paper, rubber, glass, soap, detergent and dye industries. It also plays a major role in medical treatments. It can be stored at a temperature of 15 to 30 degree C. …
-
EDTA Titrant, 0.1M, Standardized
Reagents®Concentration: 0.100M Composition: Water 96.34%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 3.66% Boiling Point: Approximately 100°C Density: 1.02 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible …
-
Barium Chloride, 12% (w/w), Standardized
Reagents®Concentration: 12% w/w Composition: Water 85.92%, Barium Chloride Dihydrate 14.08% Boiling Point: Approximately 101°C Density: 1.11 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.2 to 8.2 Solubility Information: Miscible Shelf Life: 36…
-
Hydrochloric Acid, Solution, 0.5 N
GFS ChemicalsHCl CAS#: 7647-01-0 F.W.: 36.46 NFPA#: 2-0-0 Specific Gravity: 1.010 0.5 mol/L
-
The LabChem sodium hydroxide-LabChem sodium thiosulfate in liquid form, is miscible with water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
The LabChem 0.1N in isopropanol potassium hydroxide in liquid form, is soluble in water, ethanol and methanol. It is highly flammable in liquid as well as vapor and has sharp odor. Application: For Laboratory and Manufacturing Use Only
-
Ricca 50% (v/v) Glycerin (Glycerol)
Ricca ChemicalThe Ricca Chemical glycerin is one of the most commonly used compounds and works as a moisturizer, solvent and as a sweetener in the food industry. It can also be used as a filler in low-fat foods in packaged goods.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
LabChem 3 pH Buffer Solution
LabchemThe LabChem 3 pH buffer solution in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
LabChem 2 pH Buffer Solution
LabchemThe LabChem 2 pH buffer solution in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Formaldehyde, 10% (v/v), Volumetric
Reagents®Concentration: 10% v/v Composition: Water 94.46%, Formaldehyde 3.94%, Methyl Alcohol 1.60% Boiling Point: 100°C Density: 1.01 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient DOT: NOT REGULATED.
-
LabChem 50% w/w Sodium Hydroxide
LabchemThe LabChem 50% w/w sodium hydroxide in liquid form, is exothermically soluble in water, ethanol, methanol and glycerol. It is non-flammable and has odorless odor. Application: For Industrial Use
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
The LabChem 0.25N hydrochloric acid in liquid form, is soluble in water, ethanol and methanol. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Sodium Hydroxide 1.00N
ExaxolThe Exaxol 1N sodium hydroxide features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Sodium hydroxide solution, 40% w/v in water
BeanTown ChemicalCAS: 1310-73-2 EC No: 215-185-5 MDL No: MFCD00003548 UN No: UN1824; Haz Class: 8; Packing Group: II Liquid Linear Formula: NaOH MW: 40.00 Melting Point: -12-10° Boiling Point: 105-140°
-
Sulfuric Acid 25% v/v
ExaxolThe Exaxol 25% sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only
-
Sulfuric Acid 10% v/v
ExaxolThe Exaxol 10% sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only
-
The LabChem 9.18 pH at 25 degree C buffer solution in liquid form, is non-flammable and has characteristic odor. Application: For Laboratory and Manufacturing Use Only