20 L, Solutions
-
LabChem 2 pH Buffer Solution
LabchemThe LabChem 2 pH buffer solution in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
-
Scrubber Solution, Volumetric
Reagents®Composition: Water 71.41%, Sodium Citrate Dihydrate 24.98%, Citric Acid Monohydrate 3.61% Density: 1.14 Color: Colorless to faint yellow liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 3 Months Storage: Ambient DOT: NOT REGULATED.
-
The LabChem 0.1M ethylenediaminetetraacetic acid in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Pollution Spray
Reagents®Concentration: 0.15N Composition: Water 98.36%, Calcium Sulfate Dihydrate 0.68%, Sodium Sulfate Decahydrate 0.27%, Sodium Chloride 0.23%, Sodium Nitrate 0.17%, Calcium Chloride Dihydrate 0.15%, Potassium Sulfate 0.10%, Hydrochloric Acid 0.04% Boiling Point: Approximately 100°C Density: 1 …
-
Formaldehyde, 37%, Purified
Reagents®Concentration: 37% Composition: Water 48%, Formaldehyde 37%, Methyl Alcohol 15% Grade: Purified Boiling Point: Approximately 96°C Density: 1.07 Molecular Weight: 30.03 g/mol Color: Colorless liquid Physical State: Liquid Flash Point: 60°C Solubility Information: Miscible Shelf…
-
Versenate® Solution
Reagents®Composition: Water 99.52%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.38%, Sodium Hydroxide 0.10% Boiling Point: Approximately 100°C Density: 1 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: >7 Solubility Information:…
-
The LabChem 4% w/v boric acid with Indicator in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Ricca 9% w/v Sodium Chloride
Ricca ChemicalSodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.
-
Ricca Surface Cleaning Solutions
Ricca ChemicalThis product is intended for laboratory cleaning and disinfection purposes and is typically used for disinfection of surfaces. All components of this product are filtered as part of the manufacturing process. The residue after evaporation is typically 0.001% (10 ppm) maximum at the time of…
-
Ricca 30% (w/v) Sodium Chloride
Ricca ChemicalSodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.
-
Sodium Silicate
Reagents®Composition: Sodium Silicate 40% Boiling Point: 102°C Density: 1.39 Color: Colorless/white liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 61 Months Storage: Ambient DOT: NOT REGULATED.
-
EDTA Titrant, 0.01M, Standardized
Reagents®Concentration: 0.01M Composition: Water 99.63%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.37% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage:…
-
Hydrochloric Acid 1.00N
ExaxolThe Exaxol 1N hydrochloric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
LabChem Reagent Alcohol
LabchemThe LabChem reagent alcohol in liquid form, is soluble in water, ether, aceton, chloroform, oils/fats, methanol and acids. It is highly flammable in liquid as well as vapor and has alcohol/pleasant odor. Application: For Laboratory and Manufacturing Use Only
-
Ceric Sulfate, 0.2500n Solution
GFS ChemicalsCerium(IV) sulfate, also called ceric sulfate, is an inorganic compound. These salts are solids that are soluble in water and dilute acids. Solutions of ceric sulfate have a strong yellow color. Ceric Sulfate is a powerful and versatile oxidizing agent that possesses certain advantages over…
-
LabChem 37% w/w ACS Formaldehyde
LabchemThe LabChem 37% w/w ACS formaldehyde in liquid form, is soluble in water, ethanol, methanol, ether and acetone. It is non-flammable and has irritating/pungent odor. Application: For Chemical Intermediate, Disinfectant, Laboratory Chemical
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Sodium Hydroxide, 30% (w/v)
Ricca ChemicalWe offer the largest offering of EPA solutions and standards available. Practically every solution and standard you could need to satisfy the EPA requirements are readily available. This product is certified as a reagent for the following test methods: Reference: EPA Method:…
-
Concentration: 0.05N Composition: Water 98.63%, Sodium Thiosulfate Pentahydrate 1.23%, Proprietary 0.09%, Sodium Carbonate 0.05% Boiling Point: 100°C Density: 1.01 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 to 8.4 Solubility Information: Miscible …
-
LabChem Sodium Hydroxide
LabchemThe LabChem sodium hydroxide comes in a colorless liquid form and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Ricca Sodium Cyanide Standard
Ricca ChemicalSodium cyanide is a poisonous compound with the formula NaCN. It is a white, water-soluble solid. Cyanide has a high affinity for metals, which leads to the high toxicity of this salt. Its main application, in gold mining, also exploits its high reactivity toward metals. It is a moderately strong base.
-
Sulfuric Acid 0.250N
ExaxolThe Exaxol 0.25N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Ricca Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP). Nitrogen free - suitable for kjeldahl nitrogen analysis
-
LabChem 5 pH Buffer Solution
LabchemThe LabChem 5 pH buffer solution in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Ricca 50% (v/v) Acetic Acid
Ricca ChemicalAcetic Acid is a weak acid in terms of chemical ionization, and solutions of it can be assayed with a standardized solution of a strong base, such as Sodium Hydroxide. The endpoint can be determined potentiometrically or by using an indicator that changes color in the pH range 8.0 - 10. Thymol Blue…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Sodium Hydroxide 0.500N
ExaxolThe Exaxol 0.5N sodium hydroxide features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C…
-
Ricca Electrode Cleaning Solution
Ricca ChemicalElectrode cleaning solution for removal of membrane/junction protein deposits. Application: For Removal of Membrane/Junction Protein Deposits
-
The LabChem 0.1N silver nitrate in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
The Ricca Chemical reagent is helpful to carry out or test different kinds of chemical reactions in laboratories.