Astm Water

Boiling Point: 100°C CAS Number: 7732-18-5 Certification: ASTM D1193, Type IV Chemical: 200L Chemical Formula: H2O Color: Colorless liquid Composition: Water 100% DOT: NOT REGULATED. Density: 1 Melting Point: 0.0°C Molecular Weight: 18.02 g/mol Physical State: Liquid …

CAS Number: 7732-18-5 Shelf Life (Months): 60

Formula: H₂O Formula Weight: 18.02 CAS Number: 7732-18-5 Description: Packaged in plastic containers

Meets ASTM Type II specifications for distilled water. Suitable for most laboratory applications.

Concentration: 300ppm as CaCO₃

General Composition: Demineralized, distilled water containing less than 20ppm total solids and less than 0.3ppm iron. Equivalent to Type II reagent grade water. Formula: H₂O Formula Weight: 18.02  

Meets ASTM Type I specifications. Meets ACS specifications for reagent water. Suitable for most laboratory applications.

Description ASTM Type I Reagent Grade Water (D1193-99e1) (ASTM1) Applications Type 1 laboratory grade water is required for critical laboratory applications such as HPLC mobile phase preparation, blanks and sample dilution in GC, HPLC, AA, ICP-MS and other advanced analytical…

… ASTM Type II Reagent Grade Water (D1193-99e1) (ASTM2) Applications Type II laboratory grade water is an essential part of creating chemical reagents, microbiological buffers and media that are consistently pure. It is also an excellent source of water for glassware…

Synonyms: Water Molecular Formula: H2O Molecular Weight: 18.02 Linear Structural Formula: H2O MDL Number: MFCD00011332 Melting Point: 0 C (lit.) Density: 1.000 g/mL at 3.98 C (lit.) Refractive Index: n20/D 1.34 (lit.) Application: Distilled, ASTM Type II

Ricca ACS Reagent Grade Water is manufactured by a continuous process that has been validated to produce high purity Water meeting, as a minimum, the specifications below at the time of packaging. This water is specially purified by conventional water softening, prefiltration, activated carbon…

Formula: H₂O Formula Weight: 18.02 CAS Number: 7732-18-5

CAS Number: 7732-18-5 Shelf Life (Months): 12

Formula: Mixture Description: Chloroplatinic Acid and Lead Acetate in Water

Formula: I₂ and KI in Water Description: For Iodine Adsorption Number of Carbon Black

…and mercury. API ASTM – The American Petroleum Institute scale is used to measure the specific gravity of a liquid relative to water. A sample with an API gravity value greater than 10 is lighter than water, and an API gravity value less than 10 is heavier than water. Although specific gravity…

The FT-IR Environmental Hydrocarbons ASTM D7066 Application Pack contains all of the resources and components necessary to perform efficient analysis of oil and grease in water and soil samples using PerkinElmer FT-IR instruments according to ASTM D7066 standards. This Environmental Hydrocarbons…

Azer Scientific's Deionized Water meets or exceeds the specifications for CAP Type I, CAP Type II, ASTM, NCCLS and USP water.

…Water  Applications HPLC water is used for: Liquid chromatography (LC) High performance liquid chromatography (HPLC) Ultra high performance liquid chromatography (UHPLC) Quality This water produced and tested to meet or exceed ASTM Type I standards.  The water…

The Water Bath supports the following standards: ASTM D6927, D5581, D4867 Water Bath with microprocessor-based temperature control for precise temperature control throughout the range. Similar to the H-1390 Waterbath, but does not include a magnetic circulator. It includes a stainless steel…

Ultrapure deionized water with low UV-absorptivity suitable for High Performance Liquid Chromatography, LC-MS, applications that require ACS or ASTM water and general use.

ASTM/APHA Type I Water H₂O CAS#: 7732-18-5 F.W.: 18.02

The Deluxe Water Bath supports the following standards: ASTM D6927, D5581, D4867 Water Bath with microprocessor-based temperature control for precise temperature control throughout the range. Includes magnetic circulator, ensuring constant water temperature, and, a stainless steel shelf, which…

The Large Deluxe Water Bath supports the following standards: ASTM D6927, D5581, D4867 Water Bath with microprocessor-based temperature control same as H-1390, except volume is: 14 gallons (53L) and dimensions are 20" x 20" x 10" deep (508 x 508 x 254mm). Shipping wt. 74 lbs.…

ASTM D 665 / IP 135, 1 x 300mL Storage: 2-8°C

ASTM D 665 / IP 135, 10 x 30 mL Storage: 2-8°C

ASTM D 665 / IP 135, 1 x 500mL Storage: 2-8°C

…ion chromatography and ICP-MS. Water conforms to BS 3978 (1987) grade I water for lab use, ASTM Type 1, CAP Type 1, NCCLS Type 1 and ICMC 'IDEAL' specifications. UHQ II incorporates a reverse osmosis (RO) membrane to provide 18 megohm water from a tap water feed. The effcient, low-pressure…

…Quickfit® water still features a high quality Pyrex® glass boiler and condenser. Output capacity 4Liters/Hour pyrogen free* single distilled water Easy to install and use Reliable operation - proven quality components High quality distillate complies to ASTM and ISO…

…or colored waters are unappetizing, and even slight variations in the color of the supply result in complaints from consumers. The American Public Health Association in “Standard Methods for the Examination of Water and Wastewater”, 1989, specifies that the color of water shall be…

…according to EPA recommended wash procedures. Washed with laboratory grade biodegradable, non-phosphate detergent, rinsed with ASTM Type I De-ionized water, oven dried, and assembled in a contaminate-free environment. The exterior of each case is labeled with a lot number. Each case contains…

…producing ASTM Type 1 ultrapure water and Type 3 pure water. This system features the latest reverse osmosis technology and a unique filter cartridge to deliver water of the highest reproducible quality. The arium® comfort I consistently delivers reagent-grade ultrapure water at rates of…