For standard filter papers Body is at 60° angle with internal ribs at 58° for rapid filtration Outside ribbing eliminates air lock Autoclavable

Excellent for autoclaving batches of culture media, distilled water and solutions Nalge 2250 series Graduated to contain in 1-gallon and 5-liter increments Two molded handles and size 83B polypropylene screw cap; also accepts No. 13 1/2 rubber stopper in place of cap Not recommended for use…

Significantly reduce evaporation and contamination by using a Thermo Scientific™ Nalgene™ Rectangular Polypropylene Tank with Cover, offered in sizes ranging from 8 to 114L. Tanks can be modified with a factory-installed spigot. Features: Suitable for use with many…

Fit Thermo Scientific™ Nalgene™ Narrow Mouth and Wide Mouth Bottle Replacement Closures onto Nalgene narrow mouth and wide mouth bottles.

Use the Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with 1.5" Sanitary Flanges as dispensing ports or with secure hookup for supply reservoirs to systems such as fermentors or chromatography columns. Features: Molded-in handles for ease in…

All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

Replace glass lab funnels with Thermo Scientific™ Nalgene™ Utility Funnels, which are an excellent shatter-proof alternative.  5207H70 and 5207H78 are made from shatter-proof, autoclavable polypropylene 5207H86 has a large throat opening for faster transfer of materials…

Dry and sterilize instruments and labware with Thermo Scientific™ Nalgene™ Large Polypropylene Sterilizing Pans. These autoclavable pans are also useful for collecting and washing soiled lab equipment. Pans feature rolled edges for extra stiffness and molded-in handles for easy…

Autoclavable Two-part assembly For attachment to centrifuge tubes or bottles to prevent leakage during extremely high speed centrifugation. Two-part assembly consists of polypropylene screw closure and a retained silicone gasket. Caps can be written on for easy notation.

Guarantee leakproof services with secure-fitting Thermo Scientific™ Nalgene™ Replacement Screw Closures for Nalgene Carboys. Made to fit Nalgene Carboys † The term “leakproof” applies to Thermo Scientific Nalgene products that meet the following…

Same as 5150C12 series, except bulk-packed Conical bottom allows complete retrieval of sample Non-cytotoxic; non-pyrogenic When used with cryogenic holder, base of vial interlocks with holder to permit one-handed replacement of closure. Fill line, graduations and large marking area on vial.…

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks, designed for use as closed containment systems. Offered in sizes ranging from 75 to 380L , tanks featurea a 150mm neck opening fitted with a gasketed closure for secure sealing. …

Nalge 2321 series Rectangular carboy for storing and dispensing media, sterile water, etc. Autoclavable Similar to 1753F10 series, but of polypropylene, with stainless steel carrying strap Leakproof Autoclave only when empty. Before autoclaving, set cap or closure on top of the container…

Polyproylene funnels resist virtually all chemicals including hydrofluoric acid (5246T01 to T19) Teflon® TFE stopcock and housing Leakproof closure and stopcock Visible phase interface TFE housing eliminates need for lubrication which reduces the possibility of…

Nalge 2324 Excellent chemical resistance Low profile design fits easily in tight spaces, on shelves or in refrigerators Leakproof Can be autoclaved repeatedly Polypropylene spigot and screw closure, size 63 mm; tubing same as 1753L30 series Dimensions: 8 liter Lowboys…

Polypropylene Leakproof silicone gasket in closure Externally threaded vial Printed fill line, graduations and white marking area For use in mechanical and vapor-phase freezers. Leakproof to 8000 x g in centrifuge. Includes Certificate of Quality which assures that vials are non-cytotoxic,…

Centrifugalize low- to moderate-speed large-volume biological and chemical samples with Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, which include a sealing closure for added leakproof assurance at maximum speeds for when spinning hazardous materials. Molded of rigid and robust…

Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…

Nalge 2203 series Leakproof Same design as 1706L80 series, but autoclavable Sizes 1/2 and 1 gallon include size 38-430 cap; 2 gallon size includes 53B cap Autoclavable 1 and 2 gallon sizes have loop on shoulder

Ribbed exterior, which permits free air passage when funnel is seated and prevents bridging Reinforced rim and smooth inner surface Autoclavable

Stem & Draw Tube Closure Applicable with Nalge # 2401-0030, 2401-0060 & 2401-0500

Ready-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.

Perform biopharmaceutical aseptic fluid transfer or sampling applications with the tri-clover flange of Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, molded of transparent polypropylene copolymer. Ideal for large-volume cell harvesting, pelleting and protein purification, these…

Features double-action living hinges for extra leverage and long life Jaws have interlocking teeth to grip objects tightly Scissor-type handles have a ratchet to lock tips shut Handy clamp for chromatography columns Durable forceps can be used repeatedly Autoclavable

1.2, 2.0 and 5.0mL standard and 1.5mL SYSTEM100™ cryogenic vials with bar code are ideal for automated data collection, sample inventory or to mask the identity of samples Code 128-numeric barcode is printed in black on white background Human readable is printed below bar code Barcodes are…

Thermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …

Resist stress cracking and increase tolerance to many organic chemicals with the Thermo Scientific™ Nalgene™ Cylindrical Polypropylene Tank with Cover, an economic alternative to stainless-steel tanks. Autoclavable cylindrical tanks are available in sizes ranging from 19L to 378L…

Store and transport solids, powders and liquids using Thermo Scientific™ Nalgene™ Wide Mouth Polypropylene Carboys with Handles. These durable natural polypropylene (PP) carboys feature a convenient wide-mouth opening to promote ease of cleaning and dispensing. The wide-shoulder…

Thermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …

Conical bottom bottles RCF 27,500 x g Withstand temperatures of -40° to +121°C Autoclavable bottles include 58 mm polypropylene sealing caps and retained silicone gaskets. Dimensions (o.d. x H, mm): 61.5 x 140.

Stem & Draw Tube Closure Applicable with Nalge # 2401-0125 & 2401-0250

Closure size: 70mm; vacuum limit: 5in (127mm) Hg; pressure limit: 2 psig (0.137 bar) Fluid transfer closure is composed of polypropylene and is made for fluid transfer in the lab or field Autoclavable closure fits Nalgene® Mason jars or 125mL and 250mL straight-sided jars with 70mm…