Infectious waste is sterilized with the use of high temperature autoclave bags. Bags are ideal for processing hazardous materials up to 275°F (135°C). Imprinted with a biohazard symbol and an indicator which changes to “Autoclaved” when contents are successfully sterilized.

Suitable for tissue culture and general bacteriological use Provided with marking spot which also serves for orientation Caps are not included with tubes and must be purchased separately Packaged in styrofoam trays 9215D32 tube takes size 13-415 cap and is sold in cases containing…

Optimal Performance for Traditional/Classic PCR ThermalSeal® Film Designed for basic PCR protocols Withstands temperatures from -40°C to 120°C End tabs facilitate film to plate alignment RNase/DNase/nucleic acid free ThermalSeal® a 50 µm…

PREempt RTU Disinfectant Solution and Wipes work to ensure user, protocol and product compliance with fast contact times and broad-spectrum efficacy. PREempt RTU utilizes Accelerated Hydrogen Peroxide Technology® (AHP®), a patented synergistic blend of commonly used, safe ingredients that…

Free-Sat Presaturated wipers are lint free, have four clean-cut edges and are packaged conveniently in flip-open tubs. The FS-NTP-911 comes in a peel-reseal bag. Range of substrate include: Polyester, poly-cellulose, polypropylene and cotton Saturation ranges from 50% to 99% IPA and also…

Nalge 2203 series Leakproof Same design as 1706L80 series, but autoclavable Sizes 1/2 and 1 gallon include size 38-430 cap; 2 gallon size includes 53B cap Autoclavable 1 and 2 gallon sizes have loop on shoulder

Used to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…

Disposable, polypropylene bags, 1.5 mil thick Translucent bags also usable for storing Sold in packs of 100. Available in ten sizes. Sizes given in listings below.

Virgin polypropylene construction Fit 80 well freezer racks Autoclavable Graduated Non-sterile Certified RNase and DNase free Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while…

These micro sample tubes have a captive plug and will withstand the forces of a microcentrifuge. Polypropylene Steam autoclavable at 121°C (250°F)

Easy-to-clean two-piece, polypropylene plastic Buchner funnels include a molded in perforated plate. Lightweight; not top-heavy Steam autoclavable at 121°C (250°F) Use with Vac-Ring Filter Seal (1189N06) for quick filter setup

Same as 5150C12 series, except bulk-packed Conical bottom allows complete retrieval of sample Non-cytotoxic; non-pyrogenic When used with cryogenic holder, base of vial interlocks with holder to permit one-handed replacement of closure. Fill line, graduations and large marking area on vial.…

Polypropylene Leakproof silicone gasket in closure Externally threaded vial Printed fill line, graduations and white marking area For use in mechanical and vapor-phase freezers. Leakproof to 8000 x g in centrifuge. Includes Certificate of Quality which assures that vials are non-cytotoxic,…

Fits 0.2 mL tubes on one side and 0.5 mL tubes on the other 96 wells per side in 8 x 12 format Every well numbered Custom molded Includes secure fitting lid

Nalge 2324 Excellent chemical resistance Low profile design fits easily in tight spaces, on shelves or in refrigerators Leakproof Can be autoclaved repeatedly Polypropylene spigot and screw closure, size 63 mm; tubing same as 1753L30 series Dimensions: 8 liter Lowboys…

Nalge 2221 series Rigid bottles for smooth pouring Large molded handle accommodates gloved hand Excellent chemical resistance Autoclavable and leakproof Dimensions: 1 gallon jugs measure 11 3/4” high and take size 38-430 caps. 2 gallon jugs measure 15” high and take size 53B caps.…

Polypropylene construction withstands temperatures down to -196°C Sterilized by gamma radiation Certified non-pyrogenic Non-pyrogenic vials are ideal for use cryogenic workstations, racks and trays and come in a variety of capacities. Internal and external thread vials are…

Autoclavable, polypropylene, heavy-duty construction Stylish, octagonal square shape Choice of three sizes A new range of high performance, large bottles and carboys come in a choice of 5, 10 or 20 liters. The stylish, square octagonal shape provides for increased rigidity when…

The standard for cryogenic storage, this 81-well rack works with all 0.5, 1.5 and 2.0 mL cryovials. The 9 x 9 matrix rack is designed to replace 5 1/4” x 5 1/4” cardboard freezer storage boxes. The storage rack holds up to 81 tubes and comes complete with a clear polypropylene lid and…

50 Position rack 12.5 mm Open ID sized vials Racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the vials are in place. Each well has an opening in the bottom to facilitate drainage.…

30 mL centrifuge tubes are ideal for general purpose laboratory work.  These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens.The 30 mL tube with spork is also widely used in parasitology specimen transport.  Polypropylene…

Hold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…

BRAND reagent reservoirs are made from heavy-duty polypropylene to withstand repeated autoclaving. Lids are included to help protect against sample contamination For use with all multichannel pipettes

Contec's QuickTask flat mop product line consists of a variety of knitted polyester, polyester/cellulose, microfiber/foam and microfiber mop covers that are easily installed onto a hinged mop head frame and QuickConnect handle. QuickTask mop head frames are available in stainless steel or…

Perform biopharmaceutical aseptic fluid transfer or sampling applications with the tri-clover flange of Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, molded of transparent polypropylene copolymer. Ideal for large-volume cell harvesting, pelleting and protein purification, these…

Ribbed exterior, which permits free air passage when funnel is seated and prevents bridging Reinforced rim and smooth inner surface Autoclavable

Closed top, linerless screw thread caps. Made of Polypropylene Economical, one-piece construction Unique design provides exceptional sealing properties Color: Natural GPI finish: 15-415 Autoclavable

Lightweight and durable Bottom and top can be separated for easier cleaning Autoclavable

Perfect for micro work, filling burettes, manometers and small bottles. Polypropylene plastic Steam autoclavable at 121°C (250°F)

The 4-Way Flipper benchtop storage system combines four racks in one. Designed to support a variety of tube sizes and styles, each rack can be rotated to any of the four sides to support different size centrifuge tubes. Their rugged polypropylene construction allows them to be autoclaved, placed in…

Printed Graduations (with marking area) New clearer polypropylene copolymer High centrifugal strength - up to 15,000 RCF Flat markable cap with seal Phenol / Chloroform resistant DNase, RNase and pyrogen free