Polypropylene
-
The Flipper microtube rack is designed to hold either 96 0.5 mL or 96 1.5/2.0 mL style microcentrifuge tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes. The Flipper is fitted with a clear polypropylene lid and both sides are labeled in…
-
Replacement polypropylene open top closures have a bonded-in 0.045” thick septa except for 1709B03, which is a 24-414 open top closure without septa. Choose an I-CHEM® 0.125” thick, 22 mm, PTFE silicone replacement septum to complete the closure system. Thin septa are also available.
-
Snap-Seal™ Plastic Sample Containers Patented Snap-Seal sealing mechanism Samples will not leak when closed properly Specially-designed hinged cap keeps your fingers away from the lid and the sample and reduces contamination Cap stays up when open, down when closed; and…
-
Polypropylene Carboys With Spigots
Thermo Scientific NalgeneNalge 2319 series Autoclavable and leakproof Similar to 1753C10 series, but made entirely of polypropylene, including spigot and size 83B cap with TPE gasket. Before autoclaving, set closure on carboy without engaging threads. Dismount and disassemble spigot before autoclaving. Autoclave only…
-
Graduated Microcentrifuge Tubes
Thomas®Virgin polypropylene construction Fit 80 well freezer racks Autoclavable Graduated Non-sterile Certified RNase and DNase free Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while…
-
Unwire Polypropylene Test Tube Racks with Handles
Thermo Scientific NalgeneNon-scratching Empty racks can be stacked Tube-centering depressions in bottom shelf are perforated. The hole rows have molded-in numbers and letters. Not autoclavable. All racks are 115 mm wide x 95 mm high.
-
Polypropylene Removable Tape
UltraTapeUltraTape's 1530 / 0530 is a removable double sided tape with a polypropylene liner design for easy cleanroom use. Repositional. Temporary mounting. No adhesive residue when removed from most surfaces. Cleanroom certified.
-
QuickTask Mops
ContecContec’s QuickTask product line consists of a variety of knitted polyester, polyester/cellulose, microfiber/foam, and microfiber flat mop heads that are easily installed onto a hinged mop head frame and handle assembly. Each mop head has been specifically chosen to be compatible with a…
-
Disposable Graduated Polypropylene Beakers
Maryland PlasticsChemically resistant Autoclavable Less rigid than reusable type Liquid level can be easily seen through translucent wall Low form beakers have spout and ribs on rim Size 15 mL graduated in 5 mL and 18 oz. intervals; sizes 30 and 50 mL in 5 mL and 14 oz.; sizes 100 and 150 mL in 5 mL and 12…
-
Scienceware® Table-Top Buchner Funnels
SP Bel-ArtFilter large volumes quickly Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (1/2") I.D. tube and threads into 3/4" NPT bung on the…
-
Plastic Funnels, Polypropylene
Thermo Scientific NalgeneFor standard filter papers Body is at 60° angle with internal ribs at 58° for rapid filtration Outside ribbing eliminates air lock Autoclavable
-
Costar Microcentrifuge Tubes
CorningDNase/RNase-free External graduations and frosted writing spot for easy sample identification Flat cap surface for convenient labeling Withstands maximum RCF of 17,000 x g Costar microcentrifuge tubes are certified RNase-/DNase-free and are autoclavable. The tubes are made of polypropylene.
-
The standard for cryogenic storage, this 81-well rack works with all 0.5, 1.5 and 2.0 mL cryovials. The 9 x 9 matrix rack is designed to replace 5 1/4” x 5 1/4” cardboard freezer storage boxes. The storage rack holds up to 81 tubes and comes complete with a clear polypropylene lid and…
-
50 mL Centrifuge Tubes and Caps
Caplugs Evergreen®50 mL centrifuge tubes are ideal for general purpose laboratory work. These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 50 mL tube with spork is also widely used in parasitology specimen transport. …
-
Carboys And Large Bottles
DynalonAutoclavable, polypropylene, heavy-duty construction Stylish, octagonal square shape Choice of three sizes A new range of high performance, large bottles and carboys come in a choice of 5, 10 or 20 liters. The stylish, square octagonal shape provides for increased rigidity when…
-
Scienceware® Polypropylene Scoops
SP Bel-ArtThese plastic scoops are rigid, strong and smooth. A flat bottom keeps them upright when filled or empty, allowing them to be used as weighing boats or to be placed on a flat surface. 60 and 125ml scoops have a longer handle that increases the distance between the hand and sample Rugged…
-
Flexible Series
Gordon BrushMetal free tube brushes with flexible stem are used to clean the inside of straight and especially curved pipes and tubes. They also clean valves and fitting or anywhere aggressive scrubbing is needed. Metal Free tube brushes will not scratch most any surface. Made with 100% food grade…
-
Tri-Corner Plastic Beaker, Polypropylene, Economy Style
Globe ScientificThese tri-pour plastic beakers range from 50mL to 1000mL. They are unbreakable and can be used with commonly used acids, solvents and alkalis. The laboratory beakers can be autoclaved and are reusable, yet are inexpensive enough to be disposable. All six sizes are graduated in mL. Polypropylene…
-
Polypropylene Excellent chemical resistance Molded pitchers with large, comfortable handles and well designed pouring spouts Graduations are metric, permanently translucent on outside wall Steam autoclavable at 121°C (250°F) Shatter-proof
-
The 2650 bucket system features a stainless steel rolling cart with two 25L (6.5 gallon) autoclavable polypropylene buckets, one blue and one red. Use the blue bucket for cleaning and disinfecting solutions, and the red bucket for rinsing. The durable yet lightweight cart has four casters, two…
-
CryoSure® & MST™ Vial Processing Racks
Caplugs Evergreen®Racks are designed for our CryoSure® vials & MST™ tubes, holding up to fifty vials/tubes in alpha-numerically labeled holes. The racks are autoclavable and stackable. Tubes and vials sold separately.
-
Polypropylene Y-Shape Tubing Connectors
Thermo Scientific NalgeneWith ringed divergent arms for attachment of tubing Autoclavable Outer diameter of arms is given in listings.
-
-
White Polypropylene Cap With Teflon Liner
DWK Life Sciences (Wheaton)Ideal for high purity chemicals, strong acids, solvents Excellent for environmental samples, pharmaceuticals and diagnostic reagents Teflon-faced foamed polyethylene liner offers the excellent chemical resistance of Teflon with the compressibility and sealing properties of polyethylene foam.
-
Large Capacity, Polypropylene Bottles
Thermo Scientific NalgeneNalge 2203 series Leakproof Same design as 1706L80 series, but autoclavable Sizes 1/2 and 1 gallon include size 38-430 cap; 2 gallon size includes 53B cap Autoclavable 1 and 2 gallon sizes have loop on shoulder
-
-
PPCO Centrifuge Bottles with Sealing Closure
Thermo Scientific NalgeneCentrifugalize low- to moderate-speed large-volume biological and chemical samples with Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, which include a sealing closure for added leakproof assurance at maximum speeds for when spinning hazardous materials. Molded of rigid and robust…
-
Astral Inoculation System
Bio PlasIndividual, sterile loops and needles Eliminate waste Disposable 1 µL and 10 µL loops Color coded Certified to be free of RNase, DNase, DNA, pyrogens and PCR inhibitors The Astral Inoculation System eliminates the metal or wire loop flaming step and the hazards…
-
Polyporpylene Standard tapered stems Steam autoclavable at 121°C (250°F)
-
Abdos Biohazard Disposable bags
Foxx Life SciencesBright red color, easy to open, Polypropylene (PP) Biohazard Bags are used to dispose of used Micro Tips, Tubes, and other plastic products. These bags are printed with a white indicator with the biohazard symbol and pass ASTM 1922 tear resistance and ASTM 1709 dart impact tests.
-
Staining Assemblies
DynalonStaining rack, polypropylene Autoclavable polypropylene staining rack comes with horizontal tray Tray has 20 grooves and removable snap-on handle Overall dimensions: 69.5 x 86 x 21 mm (3" x 3.5" x 1").
-
Tri-Corner Beakers
BiologixMade of strong, medical grade polypropylene, autoclavable Tri-corner design provides three dripless pouring spouts Disposable/Reusable Molded Graduations Five different sizes meet different needs