Glass, Bottles
-
Specific Gravity Bottles (Pycnometers)
DWK Life Sciences (Kimble)KIMAX® brand, Hubbard-Carmick Used in the determination of specific gravity Conforms to ASTM D 70, D 1963, D 1429 and D 115 for a variety of semi-solid materials and emulsions Conical stopper has 1.6 mm hole to allow air to escape
-
300 mL BOD Bottles with Robotic Stoppers
DWK Life Sciences (Wheaton)BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. These 300 mL capacity bottles are…
-
Clear / Flint French Square Bottles provide maximum content visibility. The space saving design saves on shelf and storage space. The wide mouth opening is ideal for mixing, storing and sampling. Attached black phenolic (thermoset) caps with Polyseal™ cone liners form an exceptionally tight seal…
-
FORTUNA® Optima glass syringes
MilliporeSigma•Interchangeable barrels and plungers •Flanges flat on two sides to prevent syringe rolling •Colored ring on plunger ends for easy volume measurement •Conformity certified by H markGlass Luer - standard Luer hubLuer lock - metal Luer lock tip on glass syringe, easy twist locks Luer needle onto…
-
Gas Washing Bottles
CorningFritted disc provides greater efficiency and more uniform dispersion of gas bubbles for complete absorption Tall form, with fused-in fritted disc 20 mm diameter and Standard Taper 40/50 joint Large hexagonal base for stability Tubulation o.d.’s are 8 mm Offered in 125,…
-
Gay-Lussac With capillary glass stopper ground to flat-sided point for take-off of overflow 10 mL and 25 mL sizes are for ASTM Standard D 369 and Barrett test H-8; AASHTO standard T-74 *min order of 10 each
-
Specific Gravity Bottles, Pycnometers, Medium Length
DWK Life Sciences (Kimble)Special medium length Ts 10/18 thermometer with a range of 14 to 38°C in 0.2° Accuracy within ±0.2°C Cap for the side tube is Standard Taper 5/12 and has small vent near the top Each flask body is numbered for easy identification The 50 mL size is used to obtain the specific gravity of…
-
HTC PAL Liquid Injection Vials and Caps
Agilent TechnologiesAgilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. …
-
FORTUNA® Optima glass syringes
MilliporeSigma•Interchangeable barrels and plungers •Flanges flat on two sides to prevent syringe rolling •Colored ring on plunger ends for easy volume measurement •Conformity certified by H markGlass Luer - standard Luer hubLuer lock - metal Luer lock tip on glass syringe, easy twist locks Luer needle onto…
-
Clear / Flint French Square Bottles provide maximum content visibility. The space saving design saves on shelf and storage space. The wide mouth opening is ideal for mixing, storing and sampling. Attached black thermoset (phenolic) caps with solid PE liners offer good chemical resistance and low…
-
Perfektum® Matched Numbered Syringes
Cadence SciencePerfektum® matched numbered syringes feature frosted individually lapped barrels and plungers which can withstand higher temperatures. These syringes are individually boxed and have matching serial numbers on mating barrels and plungers. Please Note: To order this product, a Medical…
-
PYREX Low Weighing Bottles
CorningShort length external Standard Taper joints PYREX low form weighing bottles have an external Standard Taper joint style opening. The closure style cap fits over the externally ground body.
-
Wide Mouth Milk Dilution Bottles
CorningSquare bottle facilitates pipet entry and cleaning; wide mouth for ease in measuring and filling With cut-line graduation mark at 99±1 mL Includes phenolic screw cap, size 40-400, with cemented rubber liner Will withstand sterilization (wet at 121°C) Capacity: 160 mL
-
FORTUNA® Optima glass syringes
MilliporeSigma•Interchangeable barrels and plungers •Flanges flat on two sides to prevent syringe rolling •Colored ring on plunger ends for easy volume measurement •Conformity certified by H markGlass Luer - standard Luer hubLuer lock - metal Luer lock tip on glass syringe, easy twist locks Luer needle onto…
-
Sterile, disposable, cotton-plugged, individually wrapped, shorty, PYREX® glass Same pipets as 7536N10 series, but individually wrapped in Corning Steri-View™ pouch Color-coded
-
PYREX Gas Washing Bottles
CorningPYREX® Brand Drechsel Standard Taper stopper incorporates a plain dip tube as the distributor Large hexagonal base for stability Standard Taper stopper size 29/42
-
PYREX Tall Weighing Bottles
CorningShort length Standard Taper joints Capacities from 7 to 85 mL These PYREX tall form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.
-
Corning Milk Dilution Bottles
CorningCorning glass milk dilution wide mouth bottle (approximately 28 mm opening) eases the additions of dry solids or liquids. The bottle has a phenolic screw cap with a rubber liner that will withstand wet sterilization (121°C). The bottle meets the requirements for milk dilution bottles stated in…
-
Balsam Bottle
DWK Life Sciences (Wheaton)Of Wheaton “810” soda lime glass Capacity 100 mL Provided with a glass applicator rod and a glass cap, which is ground to fit the shoulder of the bottle to form a seal
-
Disposable, Shorty, PYREX Glass Similar to 7536D49 series, but neither sterilized nor cotton- plugged Markings removed by dichromate cleaning solution
-
Disposable, sterile, PYREX® canister pack Calibrated "to deliver" Packaged in a flip-top canister to keep the pipets racked Sealed in polyethylene bags for sterility
-
Aspirator Bottles
DWK Life Sciences (Kimble)With white enamel marking spot Glass conforms to ASTM E438, Type 1, Class A Sizes 250 and 500 mL accept 5/16" I.D. flexible tubing, 1000 mL and larger accept 3/8: I.D. tubing. Kimax glass hose connection outlet is fused to the bottle. 250 mL bottle takes size 2 rubber stopper; 500 mL…
-
PYREX Low Weighing Bottles
CorningShort length Standard Taper joints Capacities from 35 to 82 mL These PYREX low form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.
-
Weighing Bottles, Low Form With Glass Stopper
DWK Life Sciences (Kimble)Low Form, KIMAX® Brand (Kimble 15165) Of borosilicate glass, with Standard Taper glass stopper. Bottom part of stopper is sealed. Designed from Federal Specification NNN-B-1493. Dimensions indicated in table are i.d. x height without cap.
-
Stopperless BOD Bottles
DWK Life Sciences (Wheaton)Marking spot Borosilicate glass 300 mL capacity BOD Bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by…
-
Bottle Weighing Tall Plug 25 X 50mm
DWK Life Sciences (Kimble)Ideal for determining the weight of solid samples. KIMAX® bottle with a plug-style, closed bottom stopper that fits into an internally ground body Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
60 mL BOD Bottles with Glass Pennyhead or Robotic Stoppers
DWK Life Sciences (Wheaton)BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. BOD bottles have a specially designed…
-
KIMAX Brand Joint Stoppers
DWK Life Sciences (Kimble)Borosilicate, with penny head Conforms to ASTM Standard E 675 Size Standard Taper 13 has solid plug; size Standard Taper 38 has recessed bottom Standard Taper designation indicates the approximate diameter of the ground zone at its widest (gauging) point.
-
Specific Gravity Bottles, Pycnometers, Le Chatelier Type
DWK Life Sciences (Kimble)KIMAX®, Le Chatelier type For the determination of the specific gravity of cement, sand and materials of similar fineness For ASTM Standards E 694 and C 188 Marked with “A” to signify adherence to accuracy specifications in U.S. Department of Commerce publication PB-246 623, The…
-
Stopper Size 19/38
DWK Life Sciences (Kimble)Stoppers are used with laboratory glassware such as flasks and separatory funnels. Sizes Standard Taper 10/30 through Standard Taper 19/38 are solid Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Serological Pipets, Shorty Glass Pipets
DWK Life Sciences (Kimble)Ideal for use in tissue culture work and other procedures performed under a fume hood or in other confined areas Calibrated to deliver with blow-out Reverse and negative calibrations Sterile Plugged Disposable serological pipets are packaged in color-coded, paper/plastic…
-
FORTUNA® Optima glass syringes
MilliporeSigma•Interchangeable barrels and plungers •Flanges flat on two sides to prevent syringe rolling •Colored ring on plunger ends for easy volume measurement •Conformity certified by H markGlass Luer - standard Luer hubLuer lock - metal Luer lock tip on glass syringe, easy twist locks Luer needle onto…