Gas Washing Bottles

… Tubulation o.d.’s are 8 mm Offered in 125, 250 and 500 mL capacities, with coarse (C) 40 to 60 microns pore size porosity disc; and extra coarse (EC) 170 to 220 micron size porosity. 125 C bottle is 300 mm tall; 250 EC and 250 C bottles, 305 mm; 500 EC and 500 C bottles, 350 mm.

With fritted disc. Joint is 29/42 for all sizes. All porosities of a given size are priced the same. Inlet/outlet arms are 8 mm O.D.

Gas washing bottle with standard taper 45/50 cap style stopper and fritted disc angled at 15° for even distribution of gas throughout absorbing material. Available with a coarse or extra coarse fritted disc. Order plastic clip separately.

These 350mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. Sidearm tubulations are 10mm O.D. The side inlet tube on this bottle has a rod sealed to the bottle near the top for extra strength. A 24/40 Standard Taper stopper is used to seal the…

… These bottles are a very effective way to humidify carbon dioxide-air mixtures for maintaining high humidity in gassed cell culture incubators. The gas enters the bottle through the top of the central vertical tube, the lower end of which is fritted and below the surface of the washing medium.…

KIMAX bottle for washing or drying gases. Gas enters the bottle through the center tube and exits into the bottom of the bottle. On rising through the washing or drying medium it is thereby washed or dried and passes out of the bottle through the side tube of the bottle stopper. Both inlet and…

Borosilicate glass bottles with tooled neck to accept a #6 Rubber stopper. Bottles are epoxy coated to help prevent scratching. Bottles and stoppers sold separately. Working capacity is 1/2 actual capacity. Rated at 60 psi @ 20°C.

These 500mL PYREX® gas washing bottles are replacements for 31760-500EC (5632D58) and 31760-500C (5632D64) These bottles have large hexagonal bases for stability

These PYREX® gas washing Standard Taper stoppers are replacements for the 500mL gas washing bottles (No. 31760-500C). Sidearm tubulations are 8mm O.D. A 40/50 Standard Taper stopper is used to seal the top to the base. This Standard Taper stopper incorporates a tube with a 20mm diameter coarse…

Large disc size provides greater capacity. 125mL size has a 25mm fritted disc.The 250mL and 500mL sizes are fitted with a 30mm disc. Joint is 40/35. All porosities of a given size are priced the same. Inlet/outlet arms are 8 mm O.D.

These PYREX® gas washing Standard Taper stoppers are replacements for the 500mL gas washing bottles (No. 31760-500EC). Sidearm tubulations are 8mm O.D. A 40/50 Standard Taper stopper is used to seal the top to the base. This Standard Taper stopper incorporates a tube with a 20mm diameter extra…

…with a stable extended base for use in precipitating elements from gas. Gas is dispersed through a removable fitting that has a coarse grade porosity, polyethylene dispersion disc Silicone stopper holds 6.3mm (1/4") O.D. tubes for entrance and exit of gas 0.5 psi maximum pressure

The Gas Generating Bottle is useful in the production of gasses and provides a funnel tube and a connecting tube. Includes a 500ml capacity Bottle, 2-hole Rubber Stopper, Thistle Tube and a 90 degree angle connector tube.

PYREX® Brand Drechsel Standard Taper stopper incorporates a plain dip tube as the distributor Large hexagonal base for stability Standard Taper stopper size 29/42

…PYREX® Washing Bottles With fused-on fritted cylinder 12 mm diameter on inlet tube and with Standard Taper 29/42 joint. With glass hooks on both bottle and cap, but without springs. Offered in 250 and 500 mL capacities, in coarse (C) and extra coarse (EC) porosities. 250EC and 250C bottles…

… These bottles are a very effective way to humidify carbon dioxide-air mixtures for maintaining high humidity in gassed cell culture incubators. The gas enters the bottle through the top of the central vertical tube, the lower end of which is fritted and below the surface of the washing medium.…

Gas washing bottle, 270mL with inner coil. Used with 6550 Cyanide distillation apparatus.

Unit contains a fritted disc for more uniform gas distribution throughout the absorbing material. Available in two porosities: extra coarse (170-220 micron) and coarse (40-60 micron) Supplied complete with hooks and two 2” springs Manufactured from 33 expansion, low extractable…

…air inlet pressure regulator with gauge, cartesian manostat, manifold with control valves for four test cells, output gauge, manostat and gas washing bottle. Built-in pressure relief valve protects against pressure surge. Cabinet is constructed of double-wall stainless steel with full insulation.…

Dreschel, high form with standard taper 24/40 joint on all sizes. Stopper and bottles available separately.

With 25 mm fritted disc diameter. 40/35 for all sizes. All porosities of a given size are priced the same. Inlet/outlet arms are 8 mm O.D.

…Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Wash contaminated clothing before reuse. Store locked up. Dispose of contents/container in accordance with local/regional/national/international regulations.…

Gas washing bottle with an extra large diameter (60mm) fritted disc sealed into the bottom of the bottle to enable increased gas throughput and uniform gas distribution. Available with coarse fritted disc. The 24/40 standard taper top outer joint accepts a A292440 gas inlet adapter which is supplied…

With 25 mm fritted disc diameter. 40/35 for all sizes. All porosities of a given size are priced the same. Inlet/outlet arms are 8 mm O.D.

New design gas washing bottle with the convenience of Ace-Threds. Center washing tube fits into borosilicate glass bottle via #25 Ace-Thred with nylon bushing and FETFE o-ring. Washing tube has #7 Ace-Safe inlet/outlet ports with 1/4-in hose connection

Convenient double-headed design Adjustable sprayer One-handed operation Wash bottle may be gas or chemically sterilized Adjustable spray wash bottle has an instant-off trigger release that eliminates messy drips. Closed position on sprayer maintains solution purity eliminating…

…gloves/protective clothing/eye protection/face protection. Use personal protective equipment as required. Take off contaminated clothing and wash before reuse. Store locked up. Dispose of contents/container in accordance with local/regional/national/international regulations. Risk Phrases:…

…described in US Pharmacopeia 2006, chapter 311. The system includes a metering valve with flow meter tube set, 250mL flask and mantle, reflux condenser with u-tube and hose connection adapters and a 250mL gas washing bottle. 5/16 in ID Vinyl tubing, Ace code 12679-20, may be purchased separately.

…sizes, from lot to lot. Storage Store septa in a closed bag out of sunlight to retard blooming, which is the formation of a whitish film on the surface of the rubber. Blooming is a natural process and does not affect performance. Remove visible bloom by washing or wiping off before use.