The Advanced Projection Ripple Tank is a comprehensive system for demonstrating basic wave phenomena using water waves. A horizontal glass plate is mounted in a watertight frame with foam beaches around the perimeter to suppress unwanted wave reflections. This tank is mounted on three tall legs…

Variable Volume Micropipettes feature built in tip ejectors and autoclavable tip cones. Offered in nine volume ranges. Each pipette is individually calibrated according to ISO 8655 standards. They work on a click stop digital system and are easy to calibrate and maintain. Each pipette is easy…

Manufactured in a precision molding facility from 100% virgin polypropylene, United micropipette tips are DNase, RNase and Pyrogen free. The highly smooth surface is hydrophobic to provide low liquid retention, increased accuracy and repeatability. Inner radial rings enable an airtight grip on the…

Available in three sizes, these funnels have eight internal ribs to facilitate filtration. They are made of polypropylene. Funnel Assortment These funnels have eight internal ribs to facilitate filtration. They are made of polypropylene and includes one each of the 35mm, 52mm, and 65mm funnels.

Round form evaporating dishes include lip. Glazed inside and outside on both sides, except for large dishes (greater than 385 ml) which are glazed inside and partially outside. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually…

Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes.  The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs.  For use with rods up to 19mm diameter.

Economical yet very durable racks that are submersible, autoclavable, and easily stack when empty.  Made from a special blend of polypropylene (PP) that makes them sink in a water bath and maintain their stability, even in agitated water.  The top tier features an alphanumeric grid…

Polypropylene tubes include blue HDPE leak-proof screw caps. The tubes and caps feature specially-designed flat threads for vacuum-type closure that is leak-free at a press of >700mm Hg. Highly smooth hydrophobic internal surfaces minimize wall effect. Silk-screen graduations and a frosted…

An assortment of hardware most often used in general chemistry labs. Starter kit includes the following Contents: Beaker Tongs, Burette Clamp, Burner Tripod, 3" ring, 9" legs, Mohr's Pinchcock Clamp, Clamp Holder, Right Angle, Clay Pipe Triangle, 2", Crucible Tongs, Nickel-plated Steel, 9" Ring…

Powerful Alnico 1 bar magnets, shipped in pairs, with separators and keepers. Width 1/2, Thickness 1/4.

Good quality natural bristles, mounted in twisted heavy gauge galvanized wire. All brushes feature a radial top.

Glass prepared microscope slides, supplied in a plastic  case. A collection of slides specific to the study of histology. Set of 25. 1.    Cerabellum, section 2.    lleum, section 3.    Spinal cord, TS, 4.    Duodenum, TS …

UniStore™ Wide Mouth, PP, reagent bottles are manufactured from USP Class VI resin that is FDA-21CFR compliant. Excellent chemical resistance to most acids, bases, and alcohols. Polypropylene caps are included. Manufactured from USP Class VI resin that is FDA-21CFR compliant for…

A comprehensive assortment of glassware, plasticware, porcelain and other hardware most commonly used in general chemistry labs and includes the following:  Beaker, Glass, 100ml (1), Beaker, Glass, 250ml (1), Beaker, Glass, 400ml (1), Beaker, Glass, 1000ml (1), Bottle, Wash, 125ml, Plastic…

These student grade partial immersion thermometers are etched in 1° increments. Each thermometer comes complete with an anti-roll triangle and is housed in a convenient re-usable plastic storage. Filled with a red-colored kerosene mixture. The thermometer has a white back and is 11-3/4"…

Disposable Pasteur pipettes provide an efficient means for inoculating culture media and transferring samples as well as reagents in both clinical and industrial laboratories. Available in two sizes, with or without cotton plugs. Manufactured from borosilicate glass 7.0 One-time use…

Good quality pipettors designed for easy and precise pipetting. Pumps feature a lever for quick release, and forward or backward wheel movement. The soft elastic chuck has a threaded collar to tightly grip glass or plastic pipettes. Easy to clean. Each size color coded.

This set of 15cm long x 2cm wide strips can be used in chromatography studies. Sold as a pack of 100 strips.

Neoprene stoppers can be used in areas where rubber would be attacked by reagents or solvents. Synthetic neoprene stoppers have good resiliency and shelf-life. They withstand petroleum products and oils as well as most inorganic acids and bases. Stopper are green for easy identification. Sold by…

With its thick glass walls and sturdy construction, this 10L bottle/flask is perfect for filtering large volumes of liquid. The thick walls and design enables this flask to withstand vacuum filtration without imploding. Graduated in 1000mL increments on a scale from 2000mL to 8000mL with an…

Unibody construction from sheet nickel, polished inside and out. Can withstand temperatures up to 600°C. Covers included.

This dropper bottle is made of translucent and low density polyethylene. Bottle can be used with or without dropper.

Set of seven neoprene adapter cones designed to fit Buchnew and fritter glass funnels, porcelain filters without headpieces, and for reverse flow cleaning for filter crucibles. Adapters can be used to support funnels, Gooch crucibles, filter tubes and other apparatus in filtration…

This dropper bottle is made of translucent and low density polyethylene. Bottle can be used with or without dropper. Shipped unassembled.

These bottles are made of translucent and Low Density Polyethylene. The distinguishing feature that these bottles contain is the built-in delivery tube making it a one-piece wash bottle. These bottles are graduated on the outer surface to reflect an approximate volume of solution filled or dispensed.

These polypropylene tubes feature a screw top with easy to read black graduations. These sterile, conical bottom tubes also feature a writing area to allow for easy sample identification. Temperatures between 0-40degrees Celsius are the suggested working range.

Protect against cross-contamination using these racked, sterile low retention filter pipette tips. Retention level is 10 times lesser with viscous samples than standard pipette tips. These universal tips are manufactured from polypropylene and the filters are manufactured from polyethylene with a…

These high-quality safety glasses are ideal for protection against dust and impact. The frames fit comfortably over glasses and fit many face sizes and shapes. The impact-resistant lenses are made from durable polycarbonate. Meets ANSI Z87.1 standards Strong polycarbonate lenses …

Designed for storing and transporting light sensitive materials, amber media / solutions bottles are autoclavable, with permanent white imprinted graduations and marking spots. The supplied GL 45 cap is liner-less and both the cap and drip free ring are polypropylene and autoclavable to 140°C.…

Sturdy Z-shaped rack made from a single sheet of heavy gauge Stainless 304. Rack features 25 wells in 5 rows, for tubes up to 16mm in diameter. Polished, smooth surface facilitates easy cleaning and labeling.

Our inoculating loop features an 8" long non-insulated aluminum handle. The non-calibrated 26 gauge nickel-chromium wire loop is approximately 8mm in diameter.

Cryo vials are designed for storage of samples as low as -196°C*. DNase, RNase,and Pyrogen-free. Radiation sterilized. Polypropylene vials include a cap embedded with a non-toxic silicone O-ring for a secure seal, a large white frosted labeling area, and silk screen graduations. Star base and…