SP Wilmad-LabGlass
-
Pyrex® MAS Rotor Inserts
SP Wilmad-LabGlassDesigned for air-sensitive samples and semi-solid samples such as gels or highly viscous liquids, Pyrex® MAS Rotor Inserts allow samples to be sealed into an NMR rotor by heat-seal or epoxy. Note: A glove box may be required for sealing of air-sensitive samples.
-
ProCulture® Magnetically Driven Vortex Impeller Only
SP Wilmad-LabGlassVortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration of media All components are autoclavable Impeller components are made from FDA approved materials
-
Le Chatelier Specific Gravity Bottle
SP Wilmad-LabGlassUsed to determine the specific gravity/density of sand, cement and other fine materials, this borosilicate glass specific gravity bottle is developed from ASTM C 188 and ASTM E 694. The body holds approximately 250mL and the capacity of the oval bulb in the neck is 17mL. Volume below the bulb is…
-
Low Pressure/Vacuum Tubes
SP Wilmad-LabGlassWilmad’s low pressure/vacuum (LPV) tube is ideal for anaerobic and gas-tight NMR experiments, and offers a convenient flame-free sealing solution for air sensitive or volatile liquid samples. Robust sealing system allows pressure build-up inside the sample Greaseless PTFE piston…
-
Extra Large Soxhlet Extraction Apparatus
SP Wilmad-LabGlassThis borosilicate glass X-Large Soxhlet extraction apparatus is used for the continuous extraction of solids with a suitable solvent. Complete units are supplied with a round bottom boiling flask (LG-7220-184 or LG-7220-188), a Soxhlet extraction tube (70mm or 100mm approx. I.D.) and an Allihn…
-
Adsorption Columns
SP Wilmad-LabGlassThese borosilicate glass indicator adsorption columns are used to determine saturates, nonaromatic olefins and aromatics in petroleum fractions that distill below 315°C as specified in ASTM Method D-1319. The standard flourescent indicator column is drawn to a fine point for retaining silica…
-
Filterware™ Microfiltration Glassware
SP Wilmad-LabGlassThese filter assemblies for FILTERWARE™ filtration system consist of an all-borosilicate glass funnel, fritted glass support base, aluminum clamp, and silicone stopper. Choose from 47mm or 90mm filter assembly sizes. Individual components are offered in various sizes for a customized unit.…
-
Polished Glass Stirrer Shafts
SP Wilmad-LabGlassPrecision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…
-
5mm O.D. Thin Walled Suprasil® NMR Tubes
SP Wilmad-LabGlassWilmad Precision NMR Suprasil® (Synthetic Quartz) Tubes are manufactured from high purity synthetic fused silica materials with <0.005ppm Fe2O3 and outstanding optical characteristics in the deep UV to the near IR. Transmission rate from 190nm to 2600nm is well over 95% (10mm…
-
5mm Bruker Spinner Turbine
SP Wilmad-LabGlassCauses less probe insert damage by better insert sample control Tachometer strip now with foil protection for improved life span Longer upper barrel stabilizer easily identified by 3mm yellow band Variable temperature operation from -150°C to +200°C Can be mixed with originals…
-
5mm O.D. Ultra-Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Class A Volumetric Serialized Flasks with Stopper
SP Wilmad-LabGlassGlass quality, calibration lines, inscription and appearance are maintained according to the former NBS circular 602. Flask has a marking spot in addition to a serial number. Calibrated to contain (TC) at 20°C. Supplied with stopper.
-
PTFE Thermometer Adapters with Compression Cap
SP Wilmad-LabGlassThese PTFE inner joint adapters have a threaded compression cap, four saddle O-rings and one Viton® O-ring for use with plain stem thermometers and inlet tubes. Accepts thermometers with O.D.'s from 3 to 7mm.
-
Bidwell-Sterling Moisture Traps with Vapor Connection
SP Wilmad-LabGlassFor the determination of water in petroleum and bituminous materials, these borosilicate glass Bidwell-Sterling moisture traps collect liquefied vapor. They feature a connection between top of vapor tube and graduated tube. This construction allows excess solvent to return to flask with minimal…
-
5mm O.D. Medium Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Universal Inlet Adapters with Screw Cap
SP Wilmad-LabGlassBorosilicate glass universal inlet adapters are capable of sealing thermometers, syringes, pipets, etc. Insert probes can be positioned within the apparatus by loosening the screw cap on top of adapter and tightening to create a seal. Bottom of adapter features a Standard Taper joint. Supplied as a…
-
10mm O.D. Economy NMR Tubes
SP Wilmad-LabGlassWilmad-LabGlass 10 mm Economy NMR Tubes are manufactured from borosilicate glass that meets the ASTM Type 1 Class B standard and recognized as N51A. Due to its nature, this glass has much less thermal-shock resistance than Class A glass used for our Precision Tubes. It may contain Fe2O3 which is…
-
ProCulture® Magnetically Driven Cap Assembly Only
SP Wilmad-LabGlass70, 100 and 120 mm caps are manufactured from glass filled PBT 70, 100 and 120 mm caps supplied with red rubber liner and Ultem impeller retaining nut Shur-Lok® 140 mm cap design has an unique compression O-ring design to insure tight internal seal of the flask and is supplied with Ultem…
-
Flask internal baffles and vortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads…
-
ProCulture® Fernbach Shaker Flasks with Beaded Rim
SP Wilmad-LabGlassIdeal for cultures that require a large surface area to volume ratio Beaded rim ensures a greater resistance to chipping Available without baffles or with three standard baffle indents to improve agitation during shaking Neck accommodates standard rubber stoppers Durable white ceramic…
-
4.0mm Rotors and Caps for Bruker
SP Wilmad-LabGlassManufactured from the highest purity Zirconia, our MAS Rotors provide the NMR spectroscopist with the ultimate alternative for analysis of solid samples; the need to solvate is eliminated. They are available for most present solid state NMR spectrometers. Wilmad's MAS Rotors are carefully…
-
Disposable NMR/EPR Tube Caps
SP Wilmad-LabGlassDisposable NMR Tube Caps are manufactured from molded PVC or Polyethylene depending on the tube OD. The different colors help track samples based on various reference solvents. When using Chloroform or Acetone as reference solution, please avoid (1) direct contact between the sample and the…
-
Filter Flask with Stopper Joint
SP Wilmad-LabGlassThis borosilicate glass heavy wall filtering flask can be used with FILTERWARE® Filtration Apparatus (LG-1755). Supplied with a silicone stopper with 9/16" hole and a #2 hose connection, the 4000mL flask has 1/2" connections.
-
Two-Piece Vacuum Traps with Hose Connection
SP Wilmad-LabGlassThese borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.
-
NMR Tubes for Bruker® MicroProbe and MicroCryoProbe
SP Wilmad-LabGlassTen times more precise in terms of camber and concentricity than capillary tubes. Ideal for Ultra-High Field (>600MHz) experiments Recommended for Bruker® MicroProbe and MicroCryoProbe Includes disposable cap
-
Cylindrical Jacketed/Indented Reaction Vessels, O-Ring Flange
SP Wilmad-LabGlassThese borosilicate glass reaction vessels are jacketed with 1/2" hose connectors. They have four indentations for improved stirring and a tooled flat flange with an O-ring groove for a greaseless seal.
-
Pressure Vacuum Valve NMR Tubes
SP Wilmad-LabGlassWilmad’s Pressure Vacuum Tube is the most reliable NMR tube on the market for medium range pressure (<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE,…
-
3 Neck O-Ring Flange Reaction Vessel Cover for Size 359 O-Rings
SP Wilmad-LabGlassFeaturing a center neck and two side necks with full length outer Standard Taper joints, this borosilicate glass 3-neck reaction vessel lid/cover has an 6-5/8" flange O.D. and comes with a size 359 O-ring. Designed to be used with 2000mL, 3000mL, and 4000mL cylindrical reaction vessels…
-
Tall Form Weighing Bottles with Flat Top Cap
SP Wilmad-LabGlassCaps can be used as weighing dishes External standard taper joint allows for sample transfer without seal interference Flat top permits stacking for increased desiccator capacity High form shape decreases bottle footprint Light weight for simple tare settings Manufactured from ASTM…
-
NMR/EPR Tube Racks
SP Wilmad-LabGlassThree styles available for our NMR and EPR Tubes 1187C59 (820-A): Lightweight polypropylene rack maximizes your benchtop storage capacity and is virtually inert 1187C64 (WG-2442): Simple but useful this stainless steel NMR tube rack accommodates 12 tubes with a maximum OD of 5mm.…
-
5mm O.D. Thin Walled Precision NMR Tubes
SP Wilmad-LabGlassTo maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…
-
Chromatography TLC Sprayers
SP Wilmad-LabGlassWhen using thin layer or paper chromatography (TLC), these borosilicate glass atomizers are used for spraying chromogenic reagents. Complete unit consists of spray head, flask, and LG-1004 clamp. The air inlet tube has an opening to release pressure and stop spraying. All joints are Standard Taper 24/40.