SP Bel-Art, Racks, Bottles
-
Chromatography Column Holder
SP Bel-ArtSecurely holds as many as eight chromatography columns up to 30mm (1-3/16") in diameter in or between its flexible loops. Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rods Tighten the screws to mount the rack at the desired height …
-
MCT/PCR Rack
SP Bel-ArtPerfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …
-
Poxygrid® "Half-Size" Test Tube Racks
SP Bel-ArtExcellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers
-
Poxygrid® Imhoff Settling Cone Rack
SP Bel-ArtUse a Poxygrid® cone rack to support three Imhoff settling cones in a single row for clearer viewing. Lightweight Poxygrid® racks hold cone tips up off the benchtop for easier viewing and to allow plug removal if required Wire frame racks have a wide base for stability; epoxy…
-
Serum Vial Racks
SP Bel-ArtTop shelf height is 41mm (1 5/8"). Chemical resistant and steam autoclavable at 121º C (250º F). Sized for serum vials (10-13mm diameter), RIA vials and T3/T4 reaction vials (13-16 & 16-20mm diameter). Polypropylene racks fit most water baths for elevated temperature incubations End plates…
-
Scienceware® Separatory Funnel Rack
SP Bel-ArtThe Scienceware® Separatory Funnel Rack allows the use of a variety of funnel sizes for a different experiments. With adjustable diameter funnel slots, this rack accepts funnel sizes from 100cc to 1000cc. In addition, the two support tiers can be independently adjusted to any height on long…
-
Scienceware® Thermometer Rack
SP Bel-ArtPolypropylene thermometer rack holds up to 25 thermometers in a vertical position Hole diameters in top and middle plates are 7.9 mm ( 5/16") Bottom plate has 3.2 mm ( 1/8”) diameter drain holes. Overall dimensions: 149 x 213 x 251 mm (5 7/8 x 8 3/8 x 9 7/8”)
-
Scienceware® Poxygrid® B.O.D. Bottle Rack
SP Bel-ArtThese racks have 12 places (3 x 4 rows) for 300mL Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6-9/16") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)
-
Scienceware® Microcentrifuge Tube Ice Racks
SP Bel-ArtLower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;…
-
Round Microcentrifuge Floating Racks
SP Bel-ArtPerfectly Sized for Beakers Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes. Tubes remain completely immersed in a beaker while tops rest above the rack Unload by lightly…
-
Poxygrid® 100mm Petri Dish Mini Rack
SP Bel-ArtOrganize and Safely Hold Six, 100mm Dishes The epoxy-coated steel wire Petri Dish Mini Rack helps keep benchtops neat and organized. Holds six 100mm Petri dishes with lids Ideal for lab transport and incubation of dishes Epoxy coated steel wire is chemical and corrosion resistant…
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-ArtThis black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…
-
Scienceware® Vacu-Rack
SP Bel-ArtThis polypropylene rack holds 143 vacuum-type syringe tubes: 80 tubes 12.7mm (1/2") O.D. and 63 tubes 16mm (5/8") O.D. up to 102mm (4") long. Tubes are suspended in channels by colored stoppers providing instant visual identification One or two channels may be left open…
-
Scienceware® Polypropylene Pipet Racks
SP Bel-Art28-Place Holds 28 pipets in vertical position Pipets fit into 2 discs connected by central support column Upper disc has 10 holes, 14 mm in diameter and 18 holes, 11 mm in diameter Lower disc has 28 holes, 4 mm in diameter to support pipet tips Overall height 7"; diameter 7"H …
-
Poxygrid® Labware Drain Stand
SP Bel-ArtDry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all)…
-
Bel-Art® Poxygrid Test Tube Racks
SP Bel-ArtChoice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…
-
Scienceware® Microtube Rack
SP Bel-ArtRound-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…
-
Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.
-
Save Time and Money. No More Searching, Fumbling or Breakage. Store pipettors while protecting pipettor tips in these epoxy-coated aluminum racks that provide quick, easy access for more efficient work. Holds up to 10 round shape pipettors such as Finnpipette®, Socorex®,…
-
Full-View Test Tube Supports
SP Bel-ArtHold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…
-
5 mL Centrifuge Tube Rack
SP Bel-ArtDesigned specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm. Made of durable and corrosion resistant white polypropylene plastic End plates have handles for easy transport and stacking Top shelf…
-
Scienceware® Pasteur Pipet Rack
SP Bel-ArtDesigned specifically for safe, convenient storage Sits flat on the bench top for convenient access without “dropping” other pipettes Has capacity of up to four sterilization cans Durable epoxy-coated surface Autoclavable Pasteur Pipettes, used in high volume for inoculating…
-
NMR Sample Tube Rack
SP Bel-ArtPolypropylene rack is steam autoclavable at 121°C (250°F). Dimensions: 21cm x 11cm x 22cm H (8 3/8" x 4 ½" x 8 ¾"). Rugged and stable polypropylene rack is made specifically to support and safely store Nuclear Magnetic Resonance tubes. Upper deck has holes; lower deck has hemispherical wells to…
-
Microcentrifuge Floating Racks
SP Bel-ArtCompact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")
-
Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…
-
Microcentrifuge Tube Rack
SP Bel-ArtSteam autoclavable at 121°C (250°F). Dimensions: 210mm x 70mm x 35mm H (8 ¼" x 2 ¾" x 1 3/8"). Two-level polypropylene rack organized and stores twenty 1.5ml tubes in numbered wells. Tubes protrude 25mm (1") for easy removal.
-
100mm Petri Dish Rack - Clear TPX Body
SP Bel-ArtClear, TPX® rack with polypropylene posts securely holds up to fifty-four 100mm Petri dishes. Shipped flat, they can be assembled in minutes. Easily viewed through the clear base and divider Dishes can be removed with one hand Built-in handle provides easy transport Rubber feet…
-
Scienceware® No-Wire™ Cuvette Rack
SP Bel-ArtAll-polypropylene rack provides gentle no-scratch support for fragile and expensive spectrophotometer cuvettes. Holds forty-two 10mm light path cuvettes 6 x 7 row layout Steam autoclavable at 121°C (250°F)
-
24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".
-
Scienceware® Pipet Support Rack
SP Bel-ArtHolds 12 pipets Polyethylene construction Pipet support rack supports pipets horizontally without putting pressure on fragile tips. Rack holds 12 volumetric or graduated pipets from 1 mL . The polyethylene support measures 241 mm L x 178 W x 292 H (9 1/2” x 7” x 11…