Liebig Condenser, Removable Hose Connections Jacket Length: 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22, and 24/40 available Hose Connection OD: 8mm With outer joint at the top and inner joint at the bottom.

Jacket has an O.D. of 40mm while coil O.D. is 8mm to provide maximum cooling capacity.

SYNTHWARE chromatography reservoir with standard taper 24/40 Rodaviss joints. Designed for use with flash chromatography. Supplied complete with open top cap, Viton o-ring and loosenig ring.

Vigreux Distilling Column, Microscale, Synthware, Joint: 14/10, Overall Length: 122mm, Length Indented Section: 75mm, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

Coil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with volatile solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint.

Desiccator with lid and ceramic plate.

With rack on shank for breaking off single or double strength glass, extra large natural diamond for durability.

Aluminum support jack. various sizes.

Friedrichs Condenser, Joint: 24/40, Overall Height: 330mm, Hose Connection: 10mm

SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a reinforced beaded top. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent…

Dewar Condenser, Micro Joints: 14/20 Inside Depth: 90mm Inside Diameter: 31mm Side joint is at 90 degree angle.

With a joint at 15º angle.

SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top spherical socket joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is…

SYNTHWARE short chrmoatography column with a lower standard taper 24/40 inner joint with a sealed in drip tip and a hose connection. Designed to perform seperations using a vacuum source. All sizes have a fritted disc to support column packing.

Indentations at the bottom for supporting packing material. Jacket permits the column to be used as a condenser.

Clamp Bosshead, Synthware, For rods up to 15mm diameter, chrome plated finishwith plastic headed screws.

Chain Clamp, Synthware, For diameter from 80mm to 150mm, with chain and spring.

SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Top Joint: ST 24/40 Note: since the…

Double coil condenser for use with Buchi rotary evaporators for cooling with tap water in a diagonal position. A 19/38 top valve. With 35/20 spherical ball joint.

Rotary Evaporator Condenser, Vertical Double coil condenser for use with Heidolph rotary evaporators Top Joint: 19/38, Spherical Joint: 35/20 ball and Inlet Feed Tube

Liebig Condenser Jacket Length: 100, 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22 and 24/40 available Hose Connection: 8 or 10mm With outer joint at the top and inner joint at the bottom.

With small ball joints to prevent mineral oil being sucked back under sudden negative pressure in the system.

Distillation Condenser, Vacuum Jacketed, Joints: 14/20 and 24/40 available, Jacket Height: 130mm and 250mm available, with 12mm ID indentations to support packing material **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**

Top outer joint is angled 75 degrees to the condenser body. Coil section is 100mm in height.

SYNTHWARE chromatography flow adpater with a 0-4 mm high vacuum PTFE valve with metering tip to adjust the air pressure. The o-rings on the valve are completely encapsulated with a thin layer of PTFE, making it inert to most chemicals. Foruse with columns having a Rodaviss 24/40 outer joint.

West Condenser, Removable Hose Connections Joints: 14/20 and 24/40 available Jacket Length: 110, 190, 200, and 300mm available Condensers feature narrow annular space for high coolant efficiency.

West Condenser Joints: 14/20, 19/22, and 24/40 available Jacket Length: 110, 190, 200, and 300mm available Narrow annular space for fast collant speed thus high cooling efficiency.

Graham Condenser Joints: 14/20, 19/22 and 24/40 available Jacket Length: 120, 200, 250, 300 and 400mm available Hose Connections: 8 or 10mm available **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**

Soxlet Extractor Upper Joint: Available in 34/45, 45/50, and 55/50 Lower Joint: Available 24/40 Used for the extraction of solids with a solvent.

Air Reflux Condensor,Microscale, Synthware, Joint: 14/10, Effective Length: 100mm, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

SYNTHWARE chromatography reservoirs with standard taper 24/40 joints or spherical 35/20 joints. Designed for use with flash chromatography.

SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Top Joint: ST 24/40. Column packing is supported by glass wool (not supplied). Note: since the chromatography column is…