Humboldt Lab Clamps, Stands & Supports
-
Humboldt Clamp & Support Rod
HumboldtDesigned to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish.
-
Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.
-
Humboldt Clamp Holder
HumboldtThe Humboldt Mfg. Co clamp holder is a critical item to have in any chemical laboratories to enhance the performance of various experiments and analysis.
-
Gas Cylinder Clamp
HumboldtDesigned to safely and conveniently secure compressed gas cylinders in an upright position. Accommodates cylinders 4-1/2" to 11" (114mm to 279mm) in diameter. The heavy-duty clamp with adjustable thumbscrews fits conveniently on any bench up to 2" (51mm) thick without marring the surface.
-
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…
-
Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.
-
Burette Clamps
HumboldtTwo prong zinc-plated, stamped steel with aluminum alloy holder is adjustable by checknut to any angle Takes objects from 3/8” to 1 3/8” diameter. Fits rods up to 1/2” diameter. Length: 6 3/8”.
-
Smooth Pipe Stem Triangles protect glassware on hotplates and over burner flames
-
Cast Iron Support Rings
HumboldtDistance from center of ring to center of clamp: 4-1/4" (108mm). Plated. Attaches to support rods up to 3/4" (19mm) in diameter.
-
Hook Clamp
HumboldtThe Clamp Hook locks into any position to support suspended thermometers, drying tubes and potash bulbs. The unit has an easy-adjusting check nut and has a 5-1/8" (130mm) maximum distance from center of muff to the hook. The minimum distance is set at 4-1/2" (114mm).
-
Sturdy Tripods featuring adjustable openings through the use of detachable rings.
-
Center-flanged Pipe Stem Triangles protect glassware on hotplates and over burner flames.
-
Clamp and Support Rods
HumboldtDesigned to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish. Supplied complete with a 3/8" x 20" (10mm x 508mm) rod (H-21350) or a 1/2" x 24" (13mm x 610mm) rod (H-21360).
-
14ga Round, Nickel-Chrome Wire Triangles protect glassware on hotplates and over burner flames.
-
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…
-
Hook Collars
HumboldtHook Collars are used for attaching pulleys, balances, cords, trusses, pendulums, and other apparatus to support rods. The collars are plated for corrosion resistance and are supplied complete with thumbscrew and hook.
-
Humboldt Test Tube Clamp
HumboldtThe Humboldt Mfg. Co test tube clamp is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures durability and long lasting usage.
-
Multi Clamp
HumboldtManufactured from heavy die-cast aluminum, this clamp is designed for clamping two pieces of apparatus into any of the three following positions: right angles, parallel, or vertically. The clamp will accommodate attachments up to 1/2"(13mm) in diameter.
-
Swivel Clamp Holder
HumboldtFor attaching extension clamps to supports Aluminum construction Has swivel for rods up to 5/8” diameter
-
These safe, simple and strong tubing clamps can be used on thin or heavy-wall tubing. Made of plated steel, the clamps incorporate a large aluminum knurled adjusting nut.
-
-
-
Platform Jacks
HumboldtThis highly stable jack can be adjusted to any height between 2-1/2" to 10" (64mm to 254mm). The jack will accept loads up to 10 lbs. (45.4 kg). The unit is constructed of aluminum top and bottom plates with a baked-enamel finish and plated steel cross members. Height adjustments are achieved by…
-
Clamp and Support Rod
HumboldtHighly versatile, the rod height can be locked into any position by a simple thumbscrew located on the outer edge of the clamp. The clamp features a sturdy handle for tightening the unit on the edge of a table top up to 1-1/2" (38mm) thick. The plated, solid steel rod is 1/2" (13mm) in diameter by…
-
Screw Compressor Clamp, Closed-Jaw C-Clamp with Side post for tubing insertion. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width
-
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…
-
Screw Compressor Clamp, Standard Open-Jaw C-Clamp without side post. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width
-
With heavy, rectangular base of plate steel, finished in hard enamel Zinc-plated steel rod is machined at lower end with U.S. National coarse thread 508 mm rod is 9.5 mm in diameter with 3/8-16 thread; 610 and 914 mm, 13 mm in diameter with 1/2-13 thread 8835B50 support is furnished…
-
Humboldt Clamp & Support Rod
HumboldtDesigned to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish.
-
Funnel Support
HumboldtThe Humboldt Funnel Support is designed to accept up to four funnels. The unit consists of a hard wood support with four slotted holes and a metal clamp with thumbscrew for support rod mounting.
-
Dovetail Clamp
HumboldtThis clamp can be instantly detached from vertical surfaces such as heaters. It is constructed of aluminum and incorporates a 5/16"-18 by 1-1/4" steel thumbscrew. The clamp is 1-3/16" wide by 2-15/16" (30mm x 59mm) long and measures 1-3/8" (35mm) from muff center to the dovetail.
-
Table Clamp
HumboldtThe Table Clamp is designed to support meter sticks and other round or square rods, either vertically or horizontally up to 1" (25mm) thick. The Vee's are milled at right angles and the clamp can be mounted on table edges up to 1-3/4" (45mm) thick. Each jaw can be adjusted separately. Heavy cast…