These opaque leakproof bottles are excellent for storing photosensitive materials, either liquid or solid. A LDPE neck insert plug provides maximum security. The easy grip LDPE screw closure contains tag holes and may be wired securely to either of 2 shoulder holes. Sloping shoulders reduce any…

Our stir bars feature ALNICO V magnetic cores which are one of the most powerful permanent magnet alloys available. Stir bars should not be stored in a random mass, or dropped on a hard surface especially steel. Stir bars should be stored in pairs to maintain magnetic strength.

Stir Bar Micro, 1.5X15 mm ( 1210C97 ) Product Dimensions (l x w x h) : 0.591x0.073x0in 15 mm length. For stirring  test tubes, micro-beakers, etc... Covered with polytetrafluoroethylene white resin. Stir Bar Micro, 1.5X8 mm ( 1210C98 ) Product Dimensions (l x w x h) :…

Developing flat bottom dishes. Dishes come in different sizes for various size prints. Made of white high-density polyethylene (HDPE) All dishes have pouring lips, except for 1217C45, 1217C46 and 1217C47 Easily cleaned Standard photographic paper

Can be stacked to minimize storage space. High chemical resistance to organic and inorganic acids. Robust with lifting lugs and strengthening ribs to ensure long life.

Manufactured in the United Kingdom, the QWS4 230V water still combines high performance and reliability with value for money. This new Quickfit® water still features a high quality Pyrex® glass boiler and condenser. Output capacity 4Liters/Hour pyrogen free* single distilled water …

15mL test tubes with blue quick closure screw caps (PE), leakproof, and suitable for centrifugation. The design of the cap avoids any contamination due to drops of liquid on the inner surface. Case of 100.

Manufactured from chemically-resistant polypropylene Specifically designed for easy effective sampling of 55 gallon drums or vessels with openings as small as 2 inch id The 100 mL bottle easily passes through the opening for quick filling The 4-inch T-design handle prevents dropping of sampler…

Product Dimensions (l x w x h) : 9.875x11x13.25in Rack Holder. This clear acrylic rack holder is suitable for use on a bench top or in a freezer to maximize use of space. This rack holder has four shelves to hold eight trays including fraction collector trays. It can fit many different racks.…

Liquid Sampler 3' 500 mL ( 1212X48 ) Product Dimensions (l x w x h) : 0x2.937x45.75in 3' handle sampler with 500 mL bottle. Manufactured from chemically resistant high density polyethylene this sampling device is perfect for corrosive environments and for hard to reach places.…

Square ratio beakers are the safe, convenient alternative to griffin style beakers. These beakers feature a vertical lip around the top of the beaker which serves two purposes: first the lip contains many spills that may occur with the rounded design of a griffin style beaker. Second, this vertical…

Supplied with white polypropylene screw closures “Glass-clear” polypropylene jars have many uses in the lab and industry. Lightweight and easy to fill. Maximum temperature for polpropylene is 121°C.

Scoops. Flat Bottom. High-density Polyethylene. 25 mL liquid capacity. Heavy duty scoops with many industrial and laboratory applications. Suitable for liquids and powders.

Leakproof bottles are ideal for a wide range of liquids and solids High performance polypropylene bottle with polypropylene screw cap Autoclavable Wide mouth for easy filling Wide mouth bottles, constructed of high-clarity polypropylene, are available in a full range of sizes…

Erlenmeyer flasks. Molded of chemically resistant, autoclavable polypropylene. Graduations are permanently molded into flask. The autoclavable polypropylene ribbed flask stand supports round bottom flasks that contain up to 10 liters.  May be stacked to save space or add height.…

Carboy with Spigot, Low-Density Polyethylene, 6 1/2 Gallon ( 1212U49 ) 6 1/2 gallon capacity, heavy duty carboy molded of  low-density Polyethylene with spigot 3/4" and has serrated tip to securely hold 1/2" to 5/8" I.D tubing.   Maximum temperature of…

Sample Cups. Polystyrene. 2 ML size for use in autoanalyzers. Product Dimensions (l x w x h) : 0x0.587x0.984in Sample Cups. Polystyrene. 1.5 ML size for use in autoanalyzers. Product Dimensions (l x w x h) : 0x0.594x0.894in Sample Cups. Polystyrene. 4 ML size for use in…

Autoclavable at 121°C Polypropylene 500mL bottle fitted with one-piece PP closure (34mm neck ID) Closure features precision jet-tip aperture for fine control Dimensions 163mm height x 75mm diameter

Extra heavy wall Low form Molded of FDA Approved high density polyethylene resin. These heavy walled graduated beakers are slightly tapered to allow nesting. Each beaker features two properly formed spouts which assist in pouring and preventing dripping.

Product Dimensions (l x w x h) : 3.31x1.09x0.5in Spot Plate LDPE. These spot plates have three depressions 21mm x 7mm deep. Tray is 28mm x 85mm. Made of low density polyethylene and will withstand temperatures to 80º C.

This carboy range features large carrying handles and indented hand grips on bottom for easy carrying  and pouring. These carboys are supplied with 63mm high-density Polyethylene closures that are threaded and can be drilled to accept faucets ( 1213F25 ). Carboys are made with food grade…

Product Dimensions (l x w x h) : 0x1.383x2.23in Vial, Coulter ® Cup. Polystyrene with polyethylene lid. Container graduated at 10 and 20 mL. Tight fitting push-on lid assures leakproof fit. Closure easily opened with just one finger. Packed 200 per package, 1000/case.  

Trays, polypropylene. Heavy trays fabricated with 3/16" thick polypropylene. All welded construction. Trays can be customized with spigots and covers which are fabricated to order. Additional sizes and materials are available upon request.

Leakproof, rigid and translucent these high density polyethylene 2000 mL wide mouth lab bottles have excellent chemical resistance. Ideal for storage and handling of liquids or solids. Made with FDA approved resin for non-contaminating storage of chemicals and food grade products. Bulk packed with…

Beaker Set 50,100,250,500,1000 (1210B32) Square ratio polypropylene beaker set consisting of  one each: 50ml, 100ml, 250ml, 500ml and 1000ml. Maximum  temperature for PP is 121°C. Beaker Set 50,100,250,600,1000 (1210B33) Square ratio polypropylene beaker set…

These low density polyethylene bottles are supplied with a ribbon applicator cap. The specially designed spout dispenses a free-flowing ribbon 5/16" wide. Ribbon may be adjusted from thin to thick spread by positioning on cap. The sealer top tongue completely seals the dispenser spout.

Beaker Set, Polypropylene Griffin style Polypropylene beaker set consisting  of one each: 50 ml, 100 ml, 250 ml, 500 ml and 1000 ml. Maximum temperature for Polypropylene is 121°C.   Beaker Set, Polymehtylpentene Griffin style Polymehtylpentene beaker set…

Tube Adapters. Excellent chemical resistance, autoclavable polypropylene, serrated connecting surfaces to prevent  tubing slipping, and adapters allow for connecting different diameter tubing.

White, opaque jars with tight-fitting lids Designed to simplify and standardize the handling and storage of specimens Excellent chemical resistance Cannot be attacked by formaldehyde, weak acids or bases. Resist freezing or boiling temperatures. Easily disposable but sturdy enough for reuse.

Product Dimensions (l x w x h) : 7.625x1.072x1.349in Sampler/Ladle 10 mL. This sampler-ladle is made from pure polytetrafluoroethylene and is supplied with a fixed 6" (150mm)  handle. Totally inert. 10 mL capacity. Dimensions:  top ID 1" and bottom OD is 3/4".

When transparency or reduced gas permeability are important, ask for the Dynalon 6 Gallon PET carboy. Made from 100% pure food grade PET resin, the product contains no plasticizers or BPA. A wide 4 inch mouth provides easy access for cleaning, sanitizing and filling. Molded graduations mark…