Corning, Sterile
-
Corning® polypropylene (PP) centrifuge tubes are ideal for applications requiring large volume centrifugation. Support cushions (2602A46 for 250mL or 0330E07 for 500mL) must be used with this product unless the centrifuge rotor has appropriate V-bottom cushions Polyethylene…
-
Falcon® Cell Strainers
CorningA faster and easier alternative to gauze filtration in procedures involving dissociation of cells from either clumps or primary tissues Consistently obtain a more uniform single-cell suspension Three nylon mesh pore sizes for optimal performance in a…
-
Corning Pipettor Tips
CorningFor consistency and reliability in small-volume liquid handling Gel-Loading Tips with Capillary Ends: Available in three different orifice configurations- 0.5 mm round, 0.4 mm flat and 0.2 mm flat- Costar gel-loading tips cover a wide range of applications. Tips are also available in…
-
Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…
-
96 Well Assay Plates
CorningClear polystyrene construction Choice of round, flat or V-bottom design These plates are ideal for solution-based assays, serial dilutions and general storage applications. Built to proposed industry standard footprint. Each well holds from 320 to 360 µl depending on which well geometry is…
-
96-Well Inserts w / CellBIND
CorningImproves cell attachment leading to increased cell growth and yields Consistent and even cell attachment Clear, flat-bottom microplate inserts are treated with a patented Corning® CellBIND surface treatment for optimal cell attachment. Flat bottom microplates have a 360 µL total…
-
Round or flat bottoms Sterile or non-sterile versions Polypropylene Model 6928F08 is a clear, round bottom, untreated microplate. It is sterile and certified DNase- and RNase-free. It is resistant to many common organic solvents (e.g., DMSO, ethanol, methanol) and has a total well volume of 95…
-
Plastic Syringe Filters
CorningFREE SAMPLES! Download the form in the Additional Info tab to request yours. Corning® syringe filters are 100% integrity tested and are certified non-pyrogenic and non-cytotoxic and are manufactured in accordance with ISO 9002 standards. A variety of membranes are available to meet…
-
Falcon® Conical Centrifuge Tubes
CorningMeet bioanalytical-grade requirements and provide unsurpassed performance in critical research applications Exceptionally strong—Industry leading centrifugation rating of 16,000 RCF (50 mL polypropylene) Unique double threaded cap design reducing cross threading and leakage …
-
Axygen microcentrifuge tubes feature a screw cap that provides a tight secure seal. Screw cap tubes are available in a variety of colors with a conical or self-standing bottom. Sterile options are also available.Maximum G-force is 20,000 RCF.RNase-/DNase-freeNonpyrogenicTubes, with Cap, SterileAll…
-
Corning® 50mL clear polypropylene (PP) preassembled closed systems self-standing centrifuge tubes come with the advanced polyethylene CentriStar™ caps. The CentriStar™ cap has an easy-on/easy-off flat top and offers advanced ergonomics with its wider knurls and roll-over edge design…
-
Axygen® 1.5mL Self Standing, Screw Cap Tubes feature screw caps that provide a tight secure seal. Will withstand up to 20,000 RCF Screw cap contains O-rings to assure efficient sealing and avoid evaporation Certified RNase-/DNase-free Nonpyrogenic
-
Bulk packed polystyrene pipets are ideal for large-scale sterile and nonsterile liquid handling applications. Unique color-coded magnifying stripe for easier meniscus viewing. Sterile and certified nonpyrogenic and DNase-/RNase-free Accuracy within ± 2% at full volume Calibrated…
-
Color-coded magnifying stripe Anti-drip tip Paper/plastic wrap Lot numbers printed on each pipet wrapper Accuate to ±2% at full volume Cleanroom pack style Cleanroom pack style offers an inner dust cover liner for the carton as well as a second sealed sleeve over each…
-
Specially designed for use in low tissue culture hoods or other confined enclosures The 1, 5 and 10 mL sizes of these pipets are almost 3” shorter than comparable disposable serological pipets The 25 mL size is 5” shorter than most comparable reusable pipets All sizes have…
-
Rating up to 17,000 RCF* (see Specifications Tab for individual ratings) Sterile RNase-/DNase-free Non-pyrogenic Materials: Corning centrifuge tubes are available in two standard materials: polypropylene (PP) and polyethylene terephthalate (PET). Polypropylene tubes provide…
-
0.4 or 3.0 µm pore membranes 6.5 mm Inserts Treated for optimal cell attachment 8600B38 (0.4 µm) and 8600B40 (3.0 µm) feature 12 HTS Transwell-24 units loaded into twelve 24 well plates. 8600B37 (0.4 µm) and 8600B39 (3.0 µm) feature 2 HTS Transwell-24 units loaded into two open reservoir trays…
-
Raised well rims Comes with high binding, TC-treated or non-treated surface Built to proposed industry standard footprint These solid black and white, opaque polystyrene plates are tested on a lot-to-lot basis for capacity and low fluorescent/ luminescent background. Plates have…
-
Feature screw caps that provide a tight secure seal Sterile Attached cap with black silicone O-ring Withstands a maximum RCF of 20,000 x g
-
2.0mL Screw Cap Tubes
CorningAxygen® 2.0mL Self Standing, Screw Cap Tubes feature screw caps that provide a tight secure seal. Will withstand up to 20,000 RCF Screw cap contains O-rings to assure efficient sealing and avoid evaporation Certified RNase-/DNase-free and nonpyrogenic for total sample integrity
-
Rated to 12,000 RCFPrinted graduations and writing area for sample identificationScrew caps can be closed with one hand. Sterile options are also available. RNase-/DNase-freeNonpyrogenic.
-
96 Well EIA/RIA Assay Plates
CorningCertified surface chemistry Ultra-low coefficient of variation (CV) for uniform binding Designed for research and in vitro diagnostic assays, all EIA/RIA plates and strips are manufactured from a special medical grade polystyrene for uniform binding, high optical clarity and low background…
-
Opaque walls reduce well-to-well crosstalk Optically clear flat well bottom Sterilized by gamma radiation and certified non-pyrogenic Microplates have half the growth area of standard 96 well microplates. Black flat bottom is optically clear permitting direct microscope viewing. Unit features…
-
Conical Bottom Screw Cap Tubes
CorningAxygen microcentrifuge tubes feature a screw cap that provides a tight secure seal. Screw cap tubes are available in a variety of colors with a conical or self-standing bottom. Sterile options are also available.Maximum G-force is 20,000 RCF.RNase-/DNase-freeNonpyrogenicTubes, with Cap, SterileAll…
-
Useful for through-plate readers and microscope viewing Standard, automation-friendly 96 well footprint Reduces total working volume up to 90% Saves time and money 125 µL well volume Black and White Clear Bottom Plates are available with either a tissue…
-
Cell Culture Clusters
CorningCompatible with most automatic dilutors, pipettors and centrifuges, plate readers and washers Alphanumeric markings aid in well identification Stacking beads and uniform footprints for easier handling One-way lid fit for non-reversible operations Certified non-pyrogenic …
-
384 And 1536 Well Assay Plates
CorningFor high throughput screening Solid polystyrene Automation-friendly 96-well footprint Reduces total working volume up to 90% Compatible with all leading 384 well readers and detectors Comes with either a tissue-culture-treated surface for cell-based assays or a non-treated surface for…
-
0.95cm² growth area per well. Flat bottoms. Nonreversible lids with condensation rings to reduce contamination. Individual alphanumerical codes for well identification. Uniform footprint for ease in stacking. Corning® CellBIND® surface treated for optimal cell attachment. Sterilized by…
-
Disposable, sterile, PYREX® canister pack Calibrated "to deliver" Packaged in a flip-top canister to keep the pipets racked Sealed in polyethylene bags for sterility
-
"Banana-peel" plastic wrap features easy opening for aseptic removal and eliminates static cling when wearing latex gloves. You can see the polystyrene pipet through the clear plastic wrap for instant size identification. Plus, space saving packaging reduces storage requirements, waste,…
-
Falcon® Serological Pipets
CorningDisposable, Clear Polystyrene, sterile For economical one-time use Liquid level is meniscus-free More transparent and rigid than polypropylene pipets Calibrated to tip, with volume adjusted for blowing out last drop Tolerance % Sterilized by gamma radiation Non-pyrogenic …
-
Sterile, disposable, cotton-plugged, individually wrapped, shorty, PYREX® glass Same pipets as 7536N10 series, but individually wrapped in Corning Steri-View™ pouch Color-coded