Corning, Glass
-
PYREX® Kjeldahl Flasks
CorningRound bottom and long neck 30 mL size has square-cut mouth for multiple micro digestions; mouths of larger sizes are tooled for uniform rubber stopper fit. 30 mL flask conforms with ASTM Standard E 147 for microchemical apparatus; 100 mL through 800 mL flasks can be used in ASTM E 258 procedure.
-
Full length 24/40 joint on all sizes except 50 mL, which has Standard Taper 19/38 joint Graduated scale indicates approximate volumes Extra large marking space
-
Flask 500 ml
CorningThese 500mL PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint.
-
PYREX® Oil Centrifuge Tubes
CorningPear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations: from 0 to 1/2 in 0.05 from 1/2 to 2 in 1/10 from 2 to 3 in 1/5 from 3 to 5 in 1/2 from 5 to 10 in 1 from 10 to…
-
These 250mL PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint. This 250mL flask is also a replacement part for organic Material: Borosilicate Glass…
-
These 1L PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height
-
Color-coded Calibrated “to deliver” Graduated PYREX pipets are designed for cotton plugging. The uniform top-end openings permit performing of plugs and allow precise control of liquid column. Color-coded by size for easy identification and sorting. Colored graduations in…
-
PYREX® Conical Centrifuge Tubes
CorningGraduated Capacity 50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length…
-
Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A
-
These Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 PTFE color-coded keyhole stoppers. For replacement stoppers see No. 7630. The graduation line is sharp and permanent. Large white block letters make the…
-
Funnel 125 ml
CorningThese 125mL PYREX® glass separatory funnels have Rotaflo® stopcocks and strong, hollow No. 22 Standard Taper glass stoppers. A glass stopper is also included for your convenience. Stem O.D. is 10mm. For replacement glass stoppers, see No. 7650 and for polyethylene stoppers, see No. 7624.
-
PYREX® Brand Funnels
CorningLong and short stem funnels are ideal for filtering Molded to an accurate 60° angle for ease in fitting filter paper Beaded rim for mechanical strength Long stem, which is constructed of heavy wall tubing Molded to an exact 58° angle , which increases filtering speed High resistance to…
-
PYREX® Powder Funnels
CorningBeaded rim and short, large bore stem Funnel i.d. and stem o.d. listed respectively
-
PYREX Brand Stopcocks
CorningValves, In-Line, Rotaflo® For vacuum or pressure work Borosilicate glass, with Teflon® stem providing chemically inert seal Require no lubrication Permit precide control of liquid or gas flow at temperatures from -40°C to +200°C Maximum vacuum 10 -8 torr…
-
These PYREX® Erlenmeyer flasks with phenolic screw caps are ideal for use as a shaker flask or for mixing, media prep and storage needs. Impact resistant caps with 24-410 GPI threads are equipped with cemented-in, inert white rubber liners which are resistant to steam sterilization. Their…
-
These flat, clear PYREX® dish covers will withstand repeated sterilization (wet or dry). Approximate dish cover diameter and height is 100x15mm. The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally space t
-
Bottle Gay-Lussac Unadjusted 2ml
CorningThese 2mL PYREX® specific gravity bottles are unadjusted for calibration in the laboratory.
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
Funnel 6000 ml
CorningThese 6L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 10 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel The plug also reduces freezing problems and grease…
-
These 5mL Class A PYREX® microburets are designed for precise analytical methods in microchemistry. Precision bore tubing throughout the body assures accuracy between any two points. Funnel top facilitates addition of reagents by pouring, or by suction from below through a rubber-stoppered tube.…
-
Distilling Traps
Corning• For determining the amount of dilution in engine crankcase oils when gasoline has been used as the fuel • Graduated from 0 to 5 mL in 1/10 mL divisions • With Standard Taper 24/40 inner joint at bottom • For ASTM Standard D 322; ANSI method Z11.29; API standard 524; and Federal Test Method…
-
Tube 50 ml
CorningUniform glass distribution in the wall, taper and bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of ac
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…
-
Identical to 9215F20 series, but with marking spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass,…
-
PYREX Fernbach Culture Flasks
CorningDesigned for culturing organisms requiring a large surface area to volume ratio Can also be used in serum production Takes stopper size 13 Thomas number 4912L15 features a triple baffle on the bottom outside edges to achieve maximum oxygen transfer to culture medium. NOTE: do…
-
Round bottom Short ring neck These PYREX® round bottom boiling flasks have short ring necks. These ring neck boiling flasks are precisely tooled for uniform stopper fit. The reinforced rim increases mechanical strength. These flasks are used in applications requiring rigid stoppering…
-
PYREX Heavy Duty Beakers
CorningExtra-heavy walls and rim minimize breakage These heavy duty beakers are specifically designed to offer the best mechanical strength under harsh conditions, such as mechanized washing operations. For convenience, the 250 through 4000mL beakers have a double graduated metric scale to indicate…
-
Disposable, Shorty, PYREX Glass Similar to 7536D49 series, but neither sterilized nor cotton- plugged Markings removed by dichromate cleaning solution
-
For use with viscous fluids, semi-solid bitumens, emulsions, etc. For ASTM Standards D 70, D 115, D 234, and D 1963; also for AASHTO standards T-43, T-151, and M-125; and ANSI Methods A37.71 and K34.1 Standard taper 24/12 solid stopper, concave on the under side, with central opening 1.6 mm bore …
-
These flat, clear PYREX® dish covers will withstand repeated sterilization (wet or dry). Approximate dish cover diameter and height is 100x10mm. The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally space t
-
Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…