Corning

Compare Tool

Select up to 3 products

1 - 32 of 72
Sort
View
Show
  • Tube 100 ml

    Corning

    These 100mL PYREX® round bottom centrifuge tubes are useful for the handling of sputum specimens. Digestion, shaking, neutralizing and centrifuging can be performed in one container. They are also useful for other clinical and microbiological tests. Screw caps resist the effects of temperature…

  • Centrifuge Tube 15 ml

    Corning

  • PYREX® Weathering Test Centrifuge Tubes

    Corning

    Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.

  • Hubbard-Carmick Specific Gravity Bottle, 25 mL, 24 / 12

    Corning

    For use with viscous fluids, semi-solid bitumens, emulsions, etc. For ASTM Standards D 70, D 115, D 234, and D 1963; also for AASHTO standards T-43, T-151, and M-125; and ANSI Methods A37.71 and K34.1 Standard taper 24/12 solid stopper, concave on the under side, with central opening 1.6 mm bore …

  • Buret 50 ml Auto

    Corning

    These 50mL PYREX® burets have an automatic zeroing device and dual Rotaflo® stopcocks for easy controlled filling. Greaseless Rotaflo® stopcocks allow smoother control and help eliminate titrating errors

  • Funnel 6000 ml

    Corning

    These 6L PYREX® pear-shaped separatory funnels have glass No. 10 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

  • Flask Complete 4000 ml

    Corning

    These PYREX® 4L volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 38 Standard Taper pennyhead glass…

  • Flask Complete 6000 ml

    Corning

    These PYREX® 6L volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 38 Standard Taper pennyhead glass…

  • Cent Tube Disp, Screw Cap Gpi 24-400, 50ml

    Corning

    These disposable 50mL Pyrex® glass centrifuge tubes are manufactured from Type I borosilicate glass and have a GPI 24-400 thread. They are supplied without caps. The tubes are designed to withstand centrifugation up to 3,000 RCF and are packed in convenie

  • Culture, Petri Dish, Cover Only, 100X10mm. Cs. Of 12

    Corning

    These flat, clear PYREX® dish covers will withstand repeated sterilization (wet or dry). Approximate dish cover diameter and height is 100x10mm. The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally space t

  • Stopcock Rotaflo 6 mm Ra

    Corning

    These high performance Rotaflo® 90° angle stopcocks can be adjusted from a 0 to 6mm bore opening and have 10mm O. D. sidearms. They are designed so that only chemically resistant Polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. …

  • Bottle Comp 350 C

    Corning

    These 350mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. Sidearm tubulations are 10mm O.D. The side inlet tube on this bottle has a rod sealed to the bottle near the top for extra strength. A 24/40 Standard Taper stopper is used to seal…

  • Flask 1000 ml Cs30

    Corning

    These 1L PYREX® round bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…

  • Bottle Gay-Lussac Unadjusted 2ml

    Corning

    These 2mL PYREX® specific gravity bottles are unadjusted for calibration in the laboratory.

  • Funnel 125 ml

    Corning

    These 125mL PYREX® glass separatory funnels have Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcocks and inner and outer 14/20 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. This funnel is also a replacement for organic chemistry kit No. 6949K (0318V10). The…

  • Tube 50 ml

    Corning

    Uniform glass distribution in the wall, taper and bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of ac

  • Gas Oil Distillation Cylinder

    Corning

    These 200mL PYREX® graduated cylinders are calibrated "to contain" (TC) in percent. 200mL is equal to 100% in 1% divisions. The scale is in durable white enamel. This cylinder may be used to measure the distillate in ASTM method D-86 "Distillation of Gas Oil and Similar…

  • Centrifuge Tube 12 ml

    Corning

    These 12mL heavy-duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length…

  • PYREX Low Actinic Erlenmeyer Flask

    Corning

    Spectral transmission varies from 0 at 300 nm to 4% at 500 nm With barrel-shaped, No. 27 Standard Taper stopper Capacity: 250 mL The protective color is an integral part of the flask, which retains the mechanical strength, chemical stability and thermal resistance of PYREX brand labware.

  • Flask Vertical 3 Necks 1000ml Cs4

    Corning

    These 1L PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height

  • Bottle Comp 125C

    Corning

    These 125mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. Bottles have large hexagonal bases for stability Sidearm tubulations are 8mm O.D A 29/42 Standard Taper stopper is used to seal the top to the base These…

  • Buret 250 ml

    Corning

    These 250mL PYREX® burets are suitable for use in school and institutional laboratories not requiring the accuracy of our Class A models. They are used when dispensing large volumes of liquids rapidly and accurately. Made from close tolerance, accurate bore tubing with uniform walls,…

  • Centrifuge Tube 12 ml

    Corning

    These 12mL heavy-duty PYREX® conical centrifuge tubes are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and…

  • PYREX® 20x125mm Disposable Round Bottom Threaded Culture Tubes, Without Marking…

    Corning

    These disposable 20x125mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 24 mL, are made from borosilicate glass, bulk-packed and are sold…

  • Funnel 6000 ml

    Corning

    These 6L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 10 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel The plug also reduces freezing problems and grease…

  • PYREX® 50mL Pear-Shaped Boiling Flask, 14/20 Standard Taper Joint

    Corning

    Pear-shaped boiling flasks have full length outer 14/20 Standard Taper joints and are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their…

  • Tube, Cent, Conical, 40ml

    Corning

    These heavy duty 40mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been nec

  • Culture, Petri Dish, Cover Only, 150X15mm. Cs 12

    Corning

    These flat, clear PYREX® dish covers will withstand repeated sterilization (wet or dry). Approximate dish cover diameter and height is 150x15mm. The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally space t

  • Culture, Petri Dish, Cover Only, 100X15mm. Cs 12

    Corning

    These flat, clear PYREX® dish covers will withstand repeated sterilization (wet or dry). Approximate dish cover diameter and height is 100x15mm. The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally space t

  • PYREX® 250mL Three Neck Distilling Flask with 19/22 Center Vertical and Side…

    Corning

    These 250mL PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint. This 250mL flask is also a replacement part for organic Material:     Borosilicate Glass…

  • PYREX® Folin-Wu Digestion Tubes

    Corning

    Fabricated from specially selected tubing for product durability. Engraved white-filled graduations at 25 and 50 mL .

  • PYREX Plain Neck Baffled Culture Flask

    Corning

    Triple baffled flask has a Delong style 38 mm neck for plastic or stainless steel closures. Triple baffles are located at the center of the flask bottom to achieve maximal oxygen transfer to culture medium. Closures are sold separately.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.