Corning, Burets
-
Widely used and referenced in laboratory protocols Dual position snap-cap prevents sample loss with ease of handling Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile) The foundation for consistent research…
-
Single use culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from…
-
The capacity tolerance on these burets is established by ASTM E 287 and they are calibrated in accordance with ASTM E 542. Tips are carefully drawn from accurate bore tubing to ensure proper drainage rates. This buret has colored markings, fine, sharp lines and large easy-to-read numbers. The…
-
PYREX® VISTA Test Tubes
CorningBeaded rim These test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25mm tube does not have a marking spot.
-
Corning® 50mL Mini Bioreactor
CorningFeatures and Benefits Polypropylene tube with large marking spot to clearly identify tube contents and experimental parameters Polypropylene cap with 4 vents; hydrophobic membrane provides gas exchange Sterile, nonpyrogenic and RNase-/DNase-free .
-
These heavy duty 10mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity of these…
-
Precision bore tubing is used these 25mL Class A PYREX® burets to assure accuracy between any two points. Durable colored graduations are sharply defined and easy to read. Carefully ground Standard Taper stopcock gives precise control. All sizes furnished with a 2mm bore stopcock plug. For…
-
Buret 50 ml Auto
CorningThese 50mL PYREX® burets have an automatic zeroing device and dual Rotaflo® stopcocks for easy controlled filling. Greaseless Rotaflo® stopcocks allow smoother control and help eliminate titrating errors
-
These PYREX® replacement tubes fit the Kuderna Danish Apparatus and have an outer 19/22 Standard Taper joint. The tube graduations go from 0 to 2mL in 0.1mL increments and from 3mL on in 1.0mL increments.
-
These disposable 20x125mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 24 mL, are made from borosilicate glass, bulk-packed and are sold…
-
Centrifuge Tube 15 ml
CorningUniform glass distribution in the wall, taper and bottom of these 15mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy.
-
Improved design for secure sample preparation and storage Withstand centrifugation up to 3,000 RCF Manufactured from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with…
-
These 40mL heavy duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length…
-
This 50mL PYREX® tube is for general hospital laboratory work. It was designed by Dr. F.N.L. Taylor, Boston City Hospital, for determinations involving multiple calibrations and for carrying out digestions. Graduated at 12.5, 25, 35 and 50mL, and supplied with a durable, white enamel marking spot.
-
PYREX® Replacement Inlet Tube
CorningThis specially designed PYREX® inlet tube is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C) Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation…
-
PYREX Micro Tubes (Corning 8061)
CorningGraduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm
-
Uniform glass distribution in the wall, taper and bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy. The durable, white enamel scale…
-
For use in educational laboratories where Class A accuracy is unnecessary Made from uniform bore tubing, with red graduations which are permanently fused onto the glass and remain sharply legible Straight glass tip stopcock with 2 mm bore Teflon stopcock plug; supplied with plastic dust cover
-
Self-standing polypropylene transport tube comes with a blue cap Volume: 5mL; cap and tube material: virgin polypropylene Unassembled; non-sterile; autoclavable Provides a ‘leak-proof’ and reliable seal for critical sample storage Features a large, frosted writing area; …
-
Tube 40 ml
CorningThese heavy duty 40mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity these…
-
PYREX® 25mL Buret with White Enamel Markings, with Dual Rotaflo® Stopcocks
-
These 50mL PYREX® conical centrifuge tubes have white enamel graduations and are graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50 in 1mL divisions. The No. 16 Standard Taper pennyhead stopper is solid glass.
-
These disposable 20x150mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 30mL, are made from borosilicate glass, bulk-packed and are sold…
-
Axygen microcentrifuge tubes feature a screw cap that provides a tight secure seal. Screw cap tubes are available in a variety of colors with a conical or self-standing bottom. Sterile options are also available.Maximum G-force is 20,000 RCF.RNase-/DNase-freeNonpyrogenicTubes, with Cap, SterileAll…
-
Mini Tube Strip Caps
CorningAxygen® 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Available in 0.65mL single MiniTube or 1.1mL single MiniTube and 8-tube or 12-tube strip…
-
Disposable Tissue Culture Tubes
CorningScrew cap, flat bottom, borosilicate glass (9215J30 and J50) Suitable for tissue culture and routine bacteriological work Flat bottom allows tube to stand unsupported 9215J30 tube takes size 15-415 cap; case of 1,000 contains four packages of 250 9215J50 tube takes size 18-415…
-
Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…
-
These Costar® 1.7mL low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…
-
PYREX® VISTA Culture Tubes
CorningReusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.
-
Falcon® Cell Strainers
CorningA faster and easier alternative to gauze filtration in procedures involving dissociation of cells from either clumps or primary tissues Consistently obtain a more uniform single-cell suspension Three nylon mesh pore sizes for optimal performance in a…
-
PYREX® Folin-Wu Digestion Tubes
CorningFabricated from specially selected tubing for product durability. Engraved white-filled graduations at 25 and 50 mL .
-
Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.