Corning
-
These 2800mL PYREX® Fernbach-style culture flasks have 100 mm wide (O.D.) threaded tops with PTFE-lined autoclavable polypropylene caps. They also have triple baffles located at the bottom edge of the flask to achieve maximal oxygen transfer to culture medium. These flasks have a large marking spot.
-
These PYREX® three neck flasks have two angled side necks at the same height with Standard Taper outer joints and a larger center neck with a vertical Standard Taper joint.
-
Basic kit is supplied complete with drawer-size polyethylene case in which components are mounted in foam The kit’s versatility enables many standard laboratory operations to be performed, such as: distillation, reaction with gas evolution, preparation or recovery, simple reflux,…
-
PYREX Cloud & Pour Test Jars
CorningFor ASTM D-97, D-1500, D-2500 Cylindrical with flat bottom, beaded rim and marking spot Height 121 mm; o.d. 35 mm With graduation ring 51 mm from bottom
-
Corning® 500 mL RPMI 1640, 1X
CorningCorning glutagro™, phenol red Named for the site at which it was developed, the Roswell Park Memorial Institute, RPMI 1640 is a modification of McCoy’s 5A containing an increased level of inositol. Examples of cell types for which this medium is appropriate include mammalian myeloma and…
-
These PYREX® West condensers are designed with a 190mm long jacket that has a 14/20 Standard Taper top joint. The bottom has 14/20 Standard Taper inner joint with a drip tip. The tubulations are on the same side to reduce breakage. The tubulation O.D. is approximately 10mm. This condenser is a…
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
Round well design with a solid black flat bottom. 2.8 mm distance between well bottoms to plate bottom. 50µL total well volume, with recommended working volume of 5-40µL. High base plate design is compatible with automation and for bar coding. Validated by Molecular Devices for the FLIPR…
-
Corning® universal fit tips in hinged DeckWorks™ racks are available in 10 µL, 200 µL, 300 µL and 1000 µL sizes. The 10 µL, 300 µL and 1000 µL tips are extended length and allow for improved access into micro (1.5 mL) and standard conical bottom (15/50 mL) centrifuge tubes. Robust 96-tip…
-
Single use culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from…
-
Meets EPA requirements for methods 3005, 3010, 3020 Fast, easy clean-up Save time, trouble and expense! No need to spend extra time and money having cane sealed to regular watch glasses in order to meet EPA specifications. 100% reliable molded-in ribs cannot pop off, eliminating the need to make…
-
Axygen 5 mL Snaplock microcentrifuge tubes fit in standard 15 mL centrifuge rotors and offer the ultimate experience in lower volume sample requirements. Smaller volume tubes minimize contamination issues – pipet tips can easily reach into the tube for sample accessibility. Expect the…
-
Poly-D-Lysine, 20 mg
CorningPoly-D-Lysine, used to culture a wide variety of cell types, particularly neurons, glial cells, and transfected cells. (20 mg) Source: Synthetic Quality: Shown to promote cell attachment and spreading of rat cerebellar granule cells Filtered (0.2 µm membrane) and tested and found negative…
-
0.4 µm or 1.0 µm pore sizes Membrane is treated for optimal cell attachment Large apical and basolateral access ports Products include Transwell unit (1 integral tray with 96 wells), reservoir plate (for cell growth steps), receiver plate (96 wells for growth or assay…
-
Wide range of applications in processes requiring high levels of sterility Meets WFI Standards Produced under the highest industry standards to ensure superior results This Water for Injection (WFI)-quality water meets United States Pharmacopeia (USP) testing…
-
96-well rack is ideal for the storage and handling of Axygen 0.2mL and 0.5mL PCR tubes Fluorescent color: blue, green, violet, red, yellow Made of polypropylene Lids included Durable, chemically inert, and can withstand extended duration at sub-zero temperatures 5 Racks/Unit; 5 Units/Case
-
PYREX Low Weighing Bottles
CorningShort length external Standard Taper joints PYREX low form weighing bottles have an external Standard Taper joint style opening. The closure style cap fits over the externally ground body.
-
PYREX Glass Serum Bottles
CorningDesigned specially for handling and storing sterile culture media and sera where stability of the glass is of prime importance. Serum bottles are also suitable for storing distilled water and standard solutions. PYREX bottles have the strength to withstand hot air (dry) or steam (wet)…
-
Plate-bound antibodies against the T-cell receptor complex have been used to induce activation of T-cells from a variety of species without the help of accessory cells. Corning BioCoat T-Cell activation plates are precoated with high quality BD Pharmingen™ CD3 antibodies. Available for…
-
Cap Only 410-18
CorningThese standard 18-410 G.P.I. thread screw caps are replacement caps for the No. 5650 PYREX® volumetric flasks. Caps have a durable cone-shaped polyethylene liner Poly-seal cap insures a leak-resistant closure and no contamination when working with most common reagents
-
Funnel Only 250 ml For 64Oz
CorningThese replacement 250mL PYREX® Squibb separatory funnels do not have a Teflon® valve assembly or glass stopper. For replacement glass Standard Taper stoppers, see No. 7650; for replacement Teflon® stopcock assemblies, see No. 7681.
-
Features Pyroceram ® top for uniform heating Superb linear control for both heating and stirring Reduced maintenance times and costs “Spill Trough” design channels spills away from electronics and controls. Support rod mount included for attachment of a standard…
-
Has low background fluorescence and minimize light scattering Designed to reduce well-to-well crosstalk 360µL total volume Recommended working volume of 75 to 200µL Conforms to standard microplate footprint and dimensions Ulta-Low attachment surface with covalently bonded…
-
Minimum Essential Medium (MEM)
CorningMinimum Essential Medium (MEM) is a common cell culture medium developed from early work using Basal Medium Eagle (BME) with normal mammalian fibroblasts and certain subtypes of HeLa cells. This research indicated that additions made to BME aided cell propagation. MEM is modified with higher…
-
PYREX Polyethylene Bumper Guard
CorningBumper guard is a polyethylene shock absorbing ring designed to reduce the breakage of cylinders. For best results, slide the ring toward the top to absorb shock should the cylinder be accidentally upset.
-
Cell Scrapers And Cell Lifters
CorningFor mechanical harvesting of cells Individually wrapped Sterile Unique blade design minimizes cell damage and ensures even contact with the growth surface. The large scraper (8600A29) is designed for use with larger flasks and roller bottles. The small scraper (8600A28) is designed…
-
Axygen® Axypet® Pro Pipettors
CorningAxygen Axypet Pro Pipettors have been engineered to provide the highest levels of comfort, accuracy, and precision. The lightweight construction, contoured handle, and 4-digit counter were designed to ensure comfortable pipetting. All pipettors feature smooth plunger movement and extremely low…
-
These Class A PYREX volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is…
-
20X SSPE
Corning20X Saline-Sodium-Phosphate-EDTA (SSPE) buffer has applications in nucleic acid hybridization and other molecular biology work.
-
PYREX Class A Burets
CorningSerialized Colored scale Teflon® stopcock plug The capacity tolerance on Class A PYREX burets is established by ASTM E-287 and is calibrated in accordance with ASTM E-542 and D-511. Each buret is individually serialized and supplied with a Certificate of Identification and Capacity, traceable…
-
PYREX Solution Bottles
CorningPYREX® Suitable for storage of distilled water and standard solutions Of borosilicate glass All have heavy, welted neck but vary in size and shape. Bottles take stopper number 12. PYREX bottles are tough and reliable yet designed with safety in mind. PYREX bottles can…
-
Complete Certificate of Analysis available for each production lot - Produced under the highest industry standards to ensure superior results - This is a competitively priced, high quality serum Fetal Bovine Serum (FBS) is the most common supplement used in cell culture. Its…