Chemglass, Reaction Vessels, Supplies
-
Features: Glass Body Features a Heavy Duty GL Style Glass Thread Auto-Stop When Opening the Valve Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve Zero Dead Space Perfluoro O-Rings on Tip and Plunger The…
-
5L ChemRxnHub™ Process Systems
ChemglassChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…
-
100L Squatty Glass Reactor System
Chemglass100L Squatty, Low Profile, glass reactor system with 400mm flange. 100L glass reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. Complete 100L Squatty Reactor System Features: More…
-
Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The #7 Chem-Thread will allow a thermometer or bleed tube having an O.D. of 4 to 7mm to be inserted vertically to the bottom of the vessel. Thread will accept CG-3504 adjustable immersion thermometers. Lid has a flat ground surface…
-
This air operated, flush bottom drain valve fits our reactors from 10 to 50 liters that have a 2” beaded pipe connection. This valve is perfect for applications where solvent extractions or partitioning are done after a reaction. Due to the constant spring tension on the plunger, the valve is…
-
1L ChemRxnHub™ Process Systems
ChemglassChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…
-
Low profile five neck vessel lid to fit CG-1920 through CG-1936 vessels. This low profile lid reduces overall height and provides less surface area for condensation. Two side necks are vertical and Two necks have a 10 angle. Angled side neck is designed for use with CG-1235/CG-1235-B series angled…
-
Reaction Vessel Lids, 3-Necks
ChemglassThree neck reaction vessel lid to fit CG-1930 through CG-1931 vessels. Side necks are on a 30° angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
Reaction Vessel Lids, 4-Necks
ChemglassFour neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
10L Process Reactor Sytems
ChemglassComplete glass reactor system on our NEW open air, auto-center stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New…
-
ChemRxnHub™ Manifold System
ChemglassThe Chemglass manifold system for use with CG-1949-X ChemglassRxnHub™ frame system allows for easy and safe connection of your circulator to our glass process reactors. Manifold helps alleviate excessive mechanical forces placed on the glass vessel inlet/outlet. System is supplied complete as…
-
Adapters, Beaded Pipe, Aluminum
ChemglassAluminum transition adapter from beaded pipe on the inlet/outlet of the reactor to NPT. Used to connect fluid transfer hose to the vessel. Adapters require the beaded pipe couplings for connection to the vessel. Two are required per reactor.
-
2L ChemRxnHub™ Process Systems
ChemglassChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…
-
Non-folding, removable side shelf support for Chemglass reactor support frames offers convenient support of distillation receiving flasks. Shelf features a V- shaped cut out area for easy viewing and installation of flasks with a bottom drain. Shelf attaches to the uprights of the support frame via…
-
Support Distillation Cart
ChemglassDistillation receiver carts for use with our 10L thru 100L reactor systems. Heavy Duty support cart can be used for round bottom flasks or cylindrical distillation receivers. Rear of cart incorporates 1/2” stainless steel lattice for mounting support clamps or accessories. Glassware can be…
-
Jacketed reaction vessel with graduation scale on both sides. Vessels are available with our NEW 1-1/2"; beaded pipe detachable drain valve. Reaction vessel is constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal…
-
This fluid driven spray ball gives nearly 360° spray coverage and is a convenient way to clean cylindrical reaction vessels from 300mL to 5L without dismantling the entire set-up. It can also be used as a wall-wetter. Spray ball is constructed of PTFE, the removable PTFE clip allows the…
-
Stirrer Bearings, PTFE, 25.4mm
ChemglassGrease-Free PTFE stirrer bearing designed for use in moderate vacuum applications. Bearing consists of a threaded glass adapter having a 45/50 inner joint, a saddle o-ring, a bushing with compression and locking nut, and a precision PTFE inner bearing. The saddle o-ring provides only glass and PTFE…
-
Reaction Vessel Lids, PTFE, 80mm
ChemglassReaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 1/2"; female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 3/4"; female NPT with 10°; X 10°;…
-
Glass filled PTFE adapter for use with the CG-1968-P zero dead space detachable valve. Adapts 1" beaded pipe to a 3/4" compression fitting for use with CG-1975 adapters and tubing. Requires a CG-1968-66 1" beaded pipe coupling.
-
300mL ChemRxnHub™ Process Systems
ChemglassChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…
-
Reaction Vessels, Cylindrical
ChemglassCylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. For clamp see CG-141 or CG-141-T, for o-ring see CG-147.
-
Jacketed Filter Vessel Body Only
ChemglassCylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Cooling jacket is equipped with 1"; beaded pipe or 30mm Tool-Free™;…
-
Features: Glass Body Features a Heavy Duty GL Style Glass Thread. Auto-Stop When Opening the Valve. Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve. Zero Dead Space Perfluoro O-Rings on Tip and Plunger The CG-1968-GL…
-
Solid phase peptide synthesis vessel having a medium porosity, fritted glass resin support. Top of the vessel has a GL thread and is supplied complete with a PTFE lined PBT screw cap. Lower stopcock is a "T";-Bore 2mm PTFE to allow nitrogen to be used to upwardly agitate the resin beads…
-
Reaction Vessel Lids, PTFE, 100mm
ChemglassReaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 3/4"; female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10; X 10° compound…
-
Cylindrical, jacketed, peptide synthesis reaction vessel having a coarse porosity fritted resin support. The vessel is constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the corresponding lids. Lower…
-
Similar to CG-1924, but with a choice of our NEW CG-911-A 0-14mm sidearm valve, a straight through 0-12mm CG-510 valve or 0-20mm CG-511 sidearm valve. All valves are designed to seal flush with the bottom of the flask avoiding the dead space normally associated with stopcock drains. This feature…
-
Features: Tool-Free™ Jacket Connection Design Allows Hose to be Attached or Removed by Hand Without Using Tools Chemically Resistant Perfluoro O-Rings on All CG-911-A and CG-511 Drain Valves Graduation Scale on Both Sides Showing the Approximate Volume Sidearm on Lower Drain…
-
Heavy wall pressure vessel is the same as CG-1880, but shaped similar to a round bottom flask with a #25 internal thread for use with a PTFE bushing as a pressure seal. Complete apparatus is supplied with vessel, back seal solid PTFE bushing and viton o-ring. Other vessel sizes and safety plastic…
-
Beaded pipe to sanitary fitting adapter connects to the 1" beaded pipe side arm of CG-1968-Q zero dead space drain valve. Approximate overall length of adapter is 2" (52mm). NOTE: Requires a CG-1968-66 beaded coupling.
-
Similar to AF-0522, but cylindrical in shape. The 25 and 50mL sizes have a 0-4mm Chem-Vac™ Chem-Cap® valve while the 100 and 350mL sizes have a 0-8mm valve size. PLEASE NOTE: STIR BARS LARGER IN DIAMETER THAN THE OPENING OF THE VALVE, OR STANDARD TAPER JOINT, CAN BE SEALED INTO VESSELS…