Chemglass Reaction Vessels & Flasks
-
300mL ChemRxnHub™ Process Systems
ChemglassChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…
-
This air operated, flush bottom drain valve fits our reactors from 10 to 50 liters that have a 2” beaded pipe connection. This valve is perfect for applications where solvent extractions or partitioning are done after a reaction. Due to the constant spring tension on the plunger, the valve is…
-
Adapters, Pressure Vessel
ChemglassAdapter permits rotary evaporation of the contents of any of our CG-1880 pressure vessels after the reaction is complete. Adapter can also be connected to any vacuum line having a 24/40 port or used in conjunction with a CG-1014 adapter to connect to hoses. Eliminates the need to transfer samples…
-
Unjacketed large scale process reaction vessels. The 10, 15, and 20L vessels have a 200mm ID flange with an o-ring groove formed in the surface of the flange. The 30L and 50L have a 300mm ID flat ground flange. The 10, 15, and 20L are available with a choice of a 2"; beaded pipe drain that is…
-
Tool Set, Process Reactors
ChemglassPrecision crafted 17-piece tool set which includes a variety of tools to handle basic assembly, repair and maintenance on process reactor systems. Includes 1 each of the following: CG-1963-B-40 Plastic Tool Box, 19" W x 10" D x 9" H. …
-
Features: Glass Body Features a Heavy Duty GL Style Glass Thread Auto-Stop When Opening the Valve Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve Zero Dead Space Perfluoro O-Rings on Tip and Plunger. …
-
Heavy wall pressure vessel is the same as CG-1880, but shaped similar to a round bottom flask with a #25 internal thread for use with a PTFE bushing as a pressure seal. Complete apparatus is supplied with vessel, back seal solid PTFE bushing and viton o-ring. Other vessel sizes and safety plastic…
-
Similar to AF-0522, but cylindrical in shape. The 25 and 50mL sizes have a 0-4mm Chem-Vac™ Chem-Cap® valve while the 100 and 350mL sizes have a 0-8mm valve size. PLEASE NOTE: STIR BARS LARGER IN DIAMETER THAN THE OPENING OF THE VALVE, OR STANDARD TAPER JOINT, CAN BE SEALED INTO VESSELS…
-
30L Process Reactor System
ChemglassComplete reactor system on our NEW open air stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can…
-
Unique glass baffle system for process reactors from 2L to 50L. Designed to increase agitation in the reactor and mimic baffles found in larger glass lined reactors. All baffles have 3/4" precision ground top and lower tubing for use with compression fittings and top jointed adapter. …
-
Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Four side necks are vertical and one neck has a 10°; degree angle. Angled side neck is designed for use with CG-1235 angled distillation adapters. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
1L ChemRxnHub™ Process Systems
ChemglassChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…
-
Reaction Vessel Lids, 5-Necks, 200mm
Chemglass5-Neck reaction vessel lid for 200mm flanged vessels. Lid has a CN 45/50, 3-SN 45/50, and 1-SN 60mm Duran o-ring flange angled for powder addition. PLEASE NOTE: 60MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY.
-
Reaction Vessel Lid, 7-Neck, 300mm
Chemglass7-Neck reaction vessel lid for 300mm flanged vessels. Lid has a CN 45/50, 5-SN 45/50, and 1-SN 80mm Duran o-ring flange angled for powder addition. PLEASE NOTE: 80MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY. *** PLEASE NOTE: THE ANGLED POWDER ADDITION PORT IS NOW 80MM AND NOT…
-
10L Process Reactor Sytems
ChemglassComplete glass reactor system on our NEW open air, auto-center stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New…
-
Bill-Board™ Solid-Phase Syntheses Sets
ChemglassThe Bill-Board™ set has been designed to simplify and expedite multiple, solid-phase syntheses. Up to 6 reactions can be conducted simultaneously in fritted glass reaction vessels. The Bill-Board™ equipment keeps the solid-phase reactions organized in a grid (for potential combinatorial…
-
Adapters, Filter Reactors, Lower Outlet
ChemglassGlass filled PTFE adapter for use with side outlet of the CG-1949-F / CG-1959-F Filter Reactor Base or the CG-1968-Q zero dead space detachable valve. Adapts 1" beaded pipe to a Male NPT. Requires a CG-1968-66, 1" beaded pipe coupling.
-
Solid phase peptide synthesis vessel having a medium porosity, fritted glass resin support. Top of the vessel has a GL thread and is supplied complete with a PTFE lined PBT screw cap. Lower stopcock is a "T";-Bore 2mm PTFE to allow nitrogen to be used to upwardly agitate the resin beads…
-
Beaded pipe to sanitary fitting adapter connects to the 1" beaded pipe side arm of CG-1968-Q zero dead space drain valve. Approximate overall length of adapter is 2 " (52mm). NOTE: Requires a CG-1968-66 beaded coupling.
-
This fluid driven spray ball gives nearly 360° spray coverage and is a convenient way to clean cylindrical reaction vessels from 300mL to 5L without dismantling the entire set-up. It can also be used as a wall-wetter. Spray ball is constructed of PTFE, the removable PTFE clip allows the…
-
Similar to CG-1930, but with morton indentations to increase agitation during stirring. Supplied complete with two polypropylene hose connections and two screw caps. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum
-
Beaded pipe to sanitary fitting adapter connects to the 1" beaded pipe side arm of CG-1968-Q zero dead space drain valve. Approximate overall length of adapter is 2" (52mm). NOTE: Requires a CG-1968-66 beaded coupling.
-
Adapters, Beaded Pipe, Aluminum
ChemglassAluminum transition adapter from beaded pipe on the inlet/outlet of the reactor to NPT. Used to connect fluid transfer hose to the vessel. Adapters require the beaded pipe couplings for connection to the vessel. Two are required per reactor.
-
Reactor Support Frame
ChemglassFeatures: Oversized Rugged 1" S.S. Pipe (1.315" OD) Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. All S.S. Uprights are Passivated to Inhibit Corrosion. Improved Support Clamp Auto-Centers Reactor and Lid,…
-
Non-folding, removable side shelf support for Chemglass reactor support frames offers convenient support of distillation receiving flasks. Shelf features a V- shaped cut out area for easy viewing and installation of flasks with a bottom drain. Shelf attaches to the uprights of the support frame via…
-
Reaction Vessels, Spherical
ChemglassSpherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Vessel will fit standard heating mantles CG-10000 through CG-12502. For clamp see…
-
Jacketed large scale process reaction vessels. The 10, 15, and 20L vessels have a 200mm ID flange with an o-ring groove formed in the surface of the flange. The 30, 50, 75, and 100L have a 300mm ID flat ground flange. The inlet/outlet of the vessels are beaded pipe fittings for use with the CG-1964…
-
Stirrer Bearings, PTFE, 25.4mm
ChemglassGrease-Free PTFE stirrer bearing designed for use in moderate vacuum applications. Bearing consists of a threaded glass adapter having a 45/50 inner joint, a saddle o-ring, a bushing with compression and locking nut, and a precision PTFE inner bearing. The saddle o-ring provides only glass and PTFE…
-
50L Squatty Glass Reactor System
Chemglass50L Squatty, Low Profile, glass reactor system with 400mm flange, on our innovative Kwik Mount support frame. Complete 50L Squatty Reactor System Features: More Clearance: 50L Squatty Glass Reactor System with 400mm Flange Maximizes Clearance Under The…
-
100L Tall Glass Reactor System
Chemglass100L Tall glass reactor system with 400mm flange on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. Complete 100L Tall Reactor System Features: Wider Access: 400mm ID Flange Provides…
-
100L Squatty Glass Reactor System
Chemglass100L Squatty, Low Profile, glass reactor system with 400mm flange. 100L glass reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. Complete 100L Squatty Reactor System Features: More…
-
Reaction Vessels, Spherical, Morton Type
ChemglassSpherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Vessel…