Precision crafted 17-piece tool set which includes a variety of tools to handle basic assembly, repair and maintenance on process reactor systems. Includes 1 each of the following: CG-1963-B-40    Plastic Tool Box, 19" W x 10" D x 9" H. …

Complete, one-piece, jacketed flask with bottom outlet, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm…

Complete, one-piece, plain flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and…

Features: Tool-Free™ Jacket Connection Design Allows Hose to be Attached or Removed by Hand Without Using Tools Chemically Resistant Perfluoro O-Rings on All CG-911-A and CG-511 Drain Valves Graduation Scale on Both Sides Showing the Approximate Volume Sidearm on Lower Drain…

Allow for visual observation of all reactions and aerosols under pressure PVC coated glass minimizes potential hazard Additional protection furnished with optional clear plastic shield - highly recommended 1/8” NPT Threaded hole in needle valve adaptor (4967A66, not included)…

Across International replacement single-jacketed 20 liter glass reactor vessel, specially made for Across International R20, R50f and R100f series 20L, 50L and 100L jacketed glass filter reactors.

These heating and stirring reaction blocks can be used for a wide rang of applications from simple synthesis to process optimization.p Six position reaction block designed for 57.5mm diameter vessels (also 40mm and other diameter vessels with appropriate adapter sleeves), and sample sizes…

The STEM Integrity 10 Reaction Station enables you to conduct 10 different reactions simultaneously within the same reaction unit, each reaction being conducted within its own cell, at its own individual temperature and stir rate. Save up to 90% equipment running costs using Integrity Reaction…

Ai R-series single/dual jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the…

Rugged, heavy wall head for use with 6384, 6386, 6388, 6423, 6425, 6427, or 6429 reaction flasks. Duran flange supplied with a shallow O-Ring groove for use with mating grooved flask. #15 Ace-Thred center and various #15 and #7 side necks available allow connections under pressure conditions…

Condenser set with 20L receiving flask for Across International 10L, 20L, 50L and 100L glass reactors

Ai R-series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a…

Cylindrical shaped tube useful for storage or simple reactions with a standard taper inner joint at the top and a Chem-Vac™ Chem-Cap® valve sidearm. Plug may be removed for sampling from tube while a purge of inert gas is maintained through the sidearm. Valve size is as listed.

Our jacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…

Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Vessel will fit standard heating mantles CG-10000 through CG-12502. For clamp see…

Similar to AF-0522, but cylindrical in shape. The 25 and 50mL sizes have a 0-4mm Chem-Vac™ Chem-Cap® valve while the 100 and 350mL sizes have a 0-8mm valve size. PLEASE NOTE: STIR BARS LARGER IN DIAMETER THAN THE OPENING OF THE VALVE, OR STANDARD TAPER JOINT, CAN BE SEALED INTO VESSELS…

The STEM RS1000 Reaction Station has 10 positions that can be programmed to run at the same temperature and stirring rate simultaneously. It can be used for a wide range of applications from simple synthesis in the laboratory to process optimisation in industry. Key Features 10 position…

50L Squatty, Low Profile, glass reactor system with 400mm flange, on our innovative Kwik Mount support frame.  Complete 50L Squatty Reactor System Features:  More Clearance: 50L Squatty Glass Reactor System with 400mm Flange Maximizes Clearance Under The…

Complete reactor system on our NEW open air stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock And…

Complete, one-piece, jacketed flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and…

Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

Complete, two-piece, jacketed flask with bottom outlet, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and…

Turn-key reactor system featuring a one-piece, unjacketed, pressure vessel with a combination Ace-thred valve and 28/15 o-ring ball joint bottom outlet. Vessel top has a 25mm Ace-thred center neck and various multi-neck configurations. System is designed to perform positive pressure reactions at up…

This Corning® kit is similar to No. 6949E, as many of the same standard laboratory experiments can be performed with this kit. The kit’s PYREX® components all use 19/22 Standard Taper joints for standardization. Note in particular the inclusion of a 250mL flask with side tubulation, which is useful…

Ai ETL C1D1 Dual-Jacketed 100L 316L-Grade Stainless Steel Filter Reactor

Ai R-ex series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a…

For use with unjacketed cylindrical reaction vessels with a 200mm ID or 300mm ID flange. Coil can be used to cool or heat the contents of a vessel. Fabricated from #304 S.S. tubing with a green PFA coating that is electrically tested to insure complete coverage. This method of manufacture provides…

Cylindrical, jacketed, peptide synthesis reaction vessel having a coarse porosity fritted resin support. The vessel is constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the corresponding lids. Lower…

Complete reactor system on our NEW open air, auto-center stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…

Our jacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…

Complete, two-piece, jacketed flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and head) design allows…