Jacketed Vessel

Compare Tool

Select up to 3 products

Jacketed Vessel
1 - 32 of 82
Sort
View
Show
  • Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Cooling jacket is equipped with 1"; beaded pipe or 30mm Tool-Free™;…

  • These cylindrical borosilicate glass reaction vessels are jacketed with 1/2" hose connections. They have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. NOTE: Use LG-7316 clamps.

  • Similar to 9843-04 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a 9852-41…

  • These jacketed, cylindrical borosilicate glass reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus…

  • …joint is 60/40. Bottom of reactor is flat to allow use of stirrer magnet. Volumes indicated are total volumes. Volume in reactive area of lamp is approx. 40-50% of total volume. Available with vessel plain or jacketed. Complete consists of vessel, sparger tube, magnet, bushing, and PTFE tubing.

  • These jacketed, cylindrical borosilicate glass reaction vessels have four indentations for improved stirring. They are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. Jacket has 1/2" hose…

  • Similar to 9833-05 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a…

  • These borosilicate glass reaction vessels are jacketed with 1/2" hose connectors. They have four indentations for improved stirring and a tooled flat flange with an O-ring groove for a greaseless seal.

  • …also cut your utility bill. Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculating fluid temperature and gives you best control over your work. It also help prevents frost to form on the outside of the vessel, allowing you to see clearly into your…

  • Complete, one-piece, jacketed flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and…

  • Heating Circulators

    Grant Instruments

    …media tempering, thawing & incubating samples University research - temperature control of spectrophotometers & refractometers and jacketed vessels Industrial labs - temperature probe calibration, water analysis, QC testing product, petrochemical testing, material testing, milk sample…

  • Glass, jacketed reaction vessel design for use with our 7874 quartz and 7875 glass immersion wells. Instead of a standard taper joint, this reactor utilizes a height-adjustable, non-freezing #50 Ace-Thred. Also featured, a 14/20 angled joint for a sparger tube, a 24/40 vertical joint for a condenser…

  • …of objects directly in the thermostat bath. Typical applications are: photometers, refractometers, viscometers, double-jacketed reaction vessels and autoclaves. The units can be used in mini-plants and kilo laboratories, for determining the freezing point, for deep temperature calibration,…

  • Similar to CG-1103, but with a larger opening at the top of the jacket and a shorter overall height. Width to Height ratio on all sizes is 2:1. Beakers also have a FLAT Bottom on both the inner and outer vessel. Hose Connections have an O.D. of 10mm at the largest serration.

  • Graduated addition funnels similar to 7268 series, except with outside jacket for cooling and/or heating. Jacket extends from just below shoulder of vessel down to the bottom tube just below the stopcock. Stopcock is either 2 or 4mm bore PTFE plug. Bot

  • Cylindrical, jacketed, peptide synthesis reaction vessel having a coarse porosity fritted resin support. The vessel is constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the corresponding lids. Lower…

  • Jacketed filter reactor systems with all you need to perform single or multi-step reactions and filtrations in the same vessel. Systems with Ace-Thred heads are pressure rated to 35 psi at 100 degrees C. System sizes vary from 150ml to 6000ml with 60mm

  • Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Cooling jacket is equipped with two removable hose connections to reduce the risk…

  • … All Vessels Are Serial Numbered GL Thread Inlet/Outlets Are Supplied With Removable High Temperature PFA Hose Connections And PPS Screw Caps 3/4in Beaded Pipe Inlet/Outlets Are For Use With CG-1968-70 Couplings, CG-1969-A-03 Or CG-1964-42 Adapters Jacketed reaction vessel with…

  • …Compression Fitting All Vessels are Serial Numbered Jacketed reaction vessel with graduation scale on both sides. Inlet/outlet has our tool-free flat flange connector. No Tools Are Necessary to attach hose fittings to the inlet and outlet of the jacket. Vessels with capacities 300mL to…

  • Similar to 9844-07 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -30 includes our 7506-10 #25 Ace-Thred bushing used to secure a 9852-41…

  • Jacketed reaction vessel with graduation scale on both sides. Vessels are available with our NEW 1-1/2"; beaded pipe detachable drain valve. Reaction vessel is constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal…

  • Jacketed large scale process reaction vessels. The 10, 15, and 20L vessels have a 200mm ID flange with an o-ring groove formed in the surface of the flange. The 30, 50, 75, and 100L have a 300mm ID flat ground flange. The inlet/outlet of the vessels are beaded pipe fittings for use with the CG-1964…

  • …The CG-510 is recommended for solution based reactions while the CG-911-A and CG-511 are recommended for reactions containing any solids. Reaction vessel is constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any…

  • Similar to CG-1930, but with morton indentations to increase agitation during stirring. Supplied complete with two polypropylene hose connections and two screw caps. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum

  • Jacketed large scale process reaction vessels. The 50 and 100L vessels have a 400mm ID flat ground flange. The inlet/outlet of the vessels are beaded pipe fittings for use with the CG-1964 and CG-1969-A beaded pipe adapters. Reactors have a 3"; beaded pipe valve that is detachable. These flush…

  • Pressure jacket for High Pressure 100 mL (100 Bar) Digestion Vessel made of ceramic for Titan MPS™ 8 Position Microwave Sample Preparation Systems.

  • Glass Jacketed Filter Reactor

    Cascade Sciences LLC

    Glass jacketed filter reactor is a turnkey package for benchtop filter reactions, isolate production.  Includes temp control, powerful stirring, clean, oil-free vacuum, cold trap, glass carboy, thermofluids, hoses, connection fittings.

  • …self- regulating heating cable Ideal for freeze protection and thawing: metal or plastic pipes and valves. Can also be used on small tanks and vessels. Indoor or outdoor use Grounded for safety Easy-to-install: pre-assembled with power cord and plug Safe to overlap, spiral wrap, or…

  • Jacketed version of 7297 series addition funnels. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Has size D hose barbs for 3/8in ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduat

  • Turnkey 50L glass jacketed reactor system optimized for decarboxylation reactions. Glass reactor temp range -60C to 200C, air stir motor in mobile steel frame. NRTL, facility power requirements: Circuit #1 = 120V / 1ph / 20A, Circuit #2 = 230V / 1ph / 20A Cooling System: Cooling to the…

  • Complete, two-piece, jacketed flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and head) design allows the…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.