Agilent Technologies Supplies AA General
-
Gas-Liquid Separator VGA 76
Agilent TechnologiesThe Agilent Technologies VGA 76 gas-liquid separator is suitable for use with Agilent AA systems. Application: For AA This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Screw, nebulizer capillary adjuster, 1/p
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Inlet cooling air filter for MP-AES
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tee Assembly
Agilent TechnologiesThe Agilent Technologies tee assembly is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
N Adapter
Agilent TechnologiesThe Agilent Technologies 6.4 mm N adapter consists of an external thread that provides good connection and ensures a leak-tight seal. Application: For FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer This product is only available to U.S. Domestic Customers. For research use only,…
-
Burner Cleaning & Alignment Card
Agilent TechnologiesThe Agilent Technologies burner cleaning and alignment card is suitable for use with Agilent AA systems. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Probe retaining nut M10x1.25 knurled 1/p
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Easy-Fit Torch
Agilent TechnologiesTorch, easy-fit, for Agilent 4200 MP-AES only (not compatible with earlier model 4100-MP-AES), blue base for easy identification. Features a 1.2mm ID injector with a ball joint base for easy connection to the spray chamber (the standard torch). This product is only available to U.S. Domestic…
-
Agilent Agilent Mixing Paddle
Agilent TechnologiesThe Agilent Technologies mixing paddle is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Fluorinated O-Ring
Agilent TechnologiesA number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…
-
Contact Cylinder
Agilent TechnologiesThe Agilent Technologies modified contact cylinder is a perfect accessory for any THGA graphite furnace systems. Application: For THGA Graphite Furnace Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Burner Head Cleaning Tool
Agilent TechnologiesThe Agilent Technologies burner head cleaning tool is suitable for PinAAcle, AAnalyst 100/200/300/400/700/800 and PerkinElmer AAS instruments. Application: For PinAAcle & AAnalyst 100/200/300/400/700/800, PerkinElmer AAS Instruments This product is only available to U.S. Domestic Customers. …
-
Pyrocoated Graphite Tube
Agilent TechnologiesThe Agilent Technologies HGA pyrocoated graphite tube is suitable for HGA 300/600/700/800/850/900 furnaces and PerkinElmer GFAAS systems. Application: For HGA 300/600/700/800/850/900 Furnaces, PerkinElmer GFAAS Systems This product is only available to U.S. Domestic Customers. For…
-
Silicone Tubing
Agilent TechnologiesAgilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: Fr FIMS Cell Exhaust Outlet, PerkinElmer FIMS/FIAS This product is only available to U.S.…
-
Burner System O-Ring
Agilent TechnologiesAgilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For Seal…
-
Nebulizer O-Ring
Agilent TechnologiesAgilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For…
-
Peristaltic Pump Tubing for PerkinElmer FIMS/FIAS
Agilent TechnologiesMarprene peristaltic pump tubing, orange/orange tabs, 6/pk. Used with SIPS 10/20. Suitable for ketone-based solvents including MIBK and DIBK. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
O-Ring Kit
Agilent TechnologiesBarrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…
-
Standards Rack
Agilent TechnologiesEach model autosampler is designed to automate the presentation of liquid samples, drawn from tubes held in racks loaded on the rack location mat, to the instrument for analysis. Each autosampler can accommodate a variety of fixtures, including standards and sample racks, probes and other…
-
O-Ring for Nebulizer Front End Cap
Agilent TechnologiesAgilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For…
-
Peristaltic Pump Tubing
Agilent TechnologiesFPM peristaltic pump tubing, yellow/yellow 12/pk. Suitable for gasoline, naptha, toluene, xylene (aromatic hydrocarbons), highly concentrated acids and bases. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
PTFE Membrane
Agilent TechnologiesThe Agilent Technologies PTFE membrane is made of high-quality, durable materials. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Nebulizer Spring
Agilent TechnologiesThe Agilent Technologies nebulizer spring has a sturdy stainless steel construction that provides durability and prevents corrosion. Application: For AAnalyst 100/300/700/800 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Inert Probe
Agilent TechnologiesProbe, inert, 0.8 mm id, PTFE-sleeved, for use with MP-AES and ICP-OES instruments (without diluter). Application: For Use With MP-AES & ICP-OES Instruments (Without Diluter) This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
High Sensitivity Nebulizer
Agilent TechnologiesThe Agilent Technologies high sensitivity nebulizer is made from an alloy of platinum and iridium and provides good resistance to corrosion. This nebulizer can be used on a variety of inorganic acids and organic solvents. Application: For AAnalyst 100/300/700/800 This product is only available…
-
PTFE Tubing, 1.9mm od x 0.3mm id, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Clear PVC tubing, 1 mm id, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
MP s/chamber, single pass glass cyclonic
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Syringe 100 uL for PSD 120, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Carousel Adaptor
Agilent TechnologiesThe Agilent Technologies carousel adaptor is suitable for use with PSD-96/97/100 model. Application: For PSD-96/97/100 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Inlet Air Filter Kit
Agilent TechnologiesAgilent 4107 nitrogen generator. Comprises replacement filter elements to suit the integrated air filter attached to the side of the Agilent 4107 Nitrogen Generator. Application: For MP-AES This product is only available to U.S. Domestic Customers. For research use only, not to be used in…
-
Peristaltic Pump Tubing for ICP-OES
Agilent TechnologiesAgilent top-quality ICP-OES peristaltic pump tubing allows you to find the appropriate product to handle any matrix. Agilent has tubing in the diameters and material required for your application: PVC, Solvaflex, FPM, or Marprene. Standard PVC works for all aqueous with medium concentrated acids or…