Polycarbonate Box, 25 cell mini box features: Drain slots for LN2 drainage, Lift-off lid, Printed numbered grid on lid for ease of inventorying and organizing samples Fiberboard boxes with grids and dividers, 25 cell mini box, features: Drain slots for LN2 drainage Printed alignment arrows,…

Nebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Aqueous…

The Agilent Technologies drying tube is suitable for use with Cetac 470419, sp5557 and Hg analyzer. Application: For Cetac 470419, sp5557, Hg Analyzer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies 1B connector with nipples is compatible to use with 2.4 to 3.2 mm OD tubing. Application: For 2.4 to 3.2 mm id Tubes, for FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use…

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: Sample tubing, For FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer This product is only…

The Agilent Technologies graphite furnace AAS optional carousel kit contains a carousel disk, 130-sample capacity, 1.1 mL vials (2000/pk), and 5 containers for bulk solutions. It is idea for GTA 120 system. Application: For GTA 120, For 130 x 1.1 mL Vials & 5 Bulk Solutions This product is only…

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. …

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…

The Agilent Technologies nebulizer provides high level of sensitivity and conforms well with PT/IR capillaries. Plastic construction provides better flexibility and ensures uniform performance for a long period of time. Application: For AAnalyst 200/400 This product is only available to U.S.…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent burner system components for PerkinElmer PinAAcle/Aanalyst AA instruments are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Organics, for PinAAcle 900 This product is only available to U.S. Domestic…

The Agilent Technologies bubble-free syringe update kit is suitable for use with PSD 97/100/110 programmable sampler dispenser furnace autosampler models. Application: For Agilent PSD 97/100/110 Programmable Sampler Dispenser Furnace Autosamplers, to Eliminate Bubble Formation During Extended…

The Agilent nebulizer used in the Mark 7 atomization system is easily adjustable by the user, so performance can be optimized with any sample type. The nebulizer is integrated into the spray chamber assembly and comprises easily interchanged capillary assemblies for low cost maintenance. All…

The Agilent Technologies Y-connector tool is suitable for PerkinElmer GFAAS systems. Application: For PerkinElmer GFAAS Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies carousel adaptor is suitable for use with PSD-96/97/100 model. Application: For PSD-96/97/100 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…

The Agilent sampling probe is equivalent to the PerkinElmer AA version and is suitable for use with PerkinElmer AS-90/90A/90plus/91/93plus/S10 Autosamplers. Application: For AS-90/90A/90Plus/91/93Plus/S10 Autosamplers This product is only available to U.S. Domestic Customers. For research…

The Agilent Technologies clamp bead adjuster is suitable for use with Mark 7 spray chamber. Application: For Mark 7 Spray Chamber This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Easy-fit inert torch, for Agilent 4200 MP-AES, for use with HF digests. Not compatible with the earlier model 4100-MP-AES. Supplied with an inert alumina injector, PTFE ball joint coupler and inert torch clamp. Recommended for use with the inert double pass spray chamber (p/n G8010-80034) - not…

The Agilent Technologies complete cell and window is compatible to use with cells and Hg lamps in any PerkinElmer instruments. Application: For FIMS-100/400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…

The Agilent Technologies capillary tubing measuring 0.023 Inch x 10 Feet provides a secure connection for 0.038 Inch Dia tubes. Polyethylene construction provides added strength and durability and is designed to use with cross-flow and high solids nebulizers. Application: For Sample Tubing,…

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…

The Agilent Technologies PCI GPIB-IEEE (National Instruments) interface card is suitable for use with PCs and workstations with PCI expansion slots. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…

The Agilent Technologies two-way T-piece assembly is used to adjust and conforms neatly to the PEEP control knob during surgical procedures in hospitals. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Nebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For…

Nebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For…

The Agilent Technologies auto sampler sampling capillary offers excellent resistance to solvent and acid. It features high-quality, durable PTFE material construction. This capillary is suitable for AS60/70/71/72/800/900 and PerkinElmer GFAAS systems. Application: For AS60/70/71/72/800/900, for…

The Agilent Technologies tee piece syringe is the most commonly used item that is used extensively in chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to…