Polycarbonate Box, 25 cell mini box features: Drain slots for LN2 drainage, Lift-off lid, Printed numbered grid on lid for ease of inventorying and organizing samples Fiberboard boxes with grids and dividers, 25 cell mini box, features: Drain slots for LN2 drainage Printed alignment arrows,…

The Agilent Technologies graphite furnace AAS optional carousel kit contains a carousel disk, 130-sample capacity, 1.1 mL vials (2000/pk), and 5 containers for bulk solutions. It is idea for GTA 120 system. Application: For GTA 120, For 130 x 1.1 mL Vials & 5 Bulk Solutions This product is only…

Vapor generation provides the best performance for analysis of hydride forming elements such as As, Se, and Hg for ICP-OES. VGA 77 supplies such as tubing, gas-liquid seperators, absorption cells, reagents, and maintenance supplies provide the key consumables need to receive optimal performance…

The Agilent Technologies THGA standard graphite tube is suitable for THGA graphite furnace and PerkinElmer GFAAS systems. Application: For THGA Graphite Furnace Systems, PerkinElmer GfAAS Systems This product is only available to U.S. Domestic Customers. For research use only, not to be…

This peristaltic pump tubing is recommended for use with the Agilent fully automated modular VGA 77 vapor generation accessory, which. is used with Agilent flame AA systems to enable rapid trace level determinations of mercury (using the proven cold vapor technique) and other hydride-forming…

The Agilent Technologies HGA pyrocoated graphite tube is suitable L'vov platforms, HGA 300/600/700/800/850/900 furnaces and PerkinElmer GFAAS systems. Application: For L'vov Platforms (not Including Platform), for HGA 300/600/700/800/850/900 Furnaces, PerkinElmer GFAAS Systems This product is…

The Agilent Technologies 0.6 mm sampling probe is made from epoxy polymer for durability and the PTFE lining on the surface provides good corrosion resistance. Application: For AS-90/90A/90 Plus/91/93 Plus Autosamplers. Suitable for InOrganic Acids & Most Organic Solvents, Except NMP This…

Agilent provides a range of supplies for the PSD 100/120 Programmable Sample Dspenser used with Agilent GFAAS systems, including sample vials, beakers, adapters, dispensing capillary assemblies, dispensing syringe and replacement plungers. This product is only available to U.S. Domestic…

Agilent burner system components for PerkinElmer PinAAcle/Aanalyst AA instruments are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: Burner System Components for PerkinElmer AAnalyst 100/200/300/400/700/800 & PinAAcle …

The Agilent Technologies multi-use quartz window is designed to use with HGA graphite furnaces and the quartz construction provides added strength and durability. Application: For PE FIAS 100/200/400, FIMS, HGA Graphite Furnace, Optima DV ICP-OES & DSC DPA 7 This product is only available to…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies burner cleaning and alignment card is suitable for use with Agilent AA systems. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Probe, inert, 0.8 mm id, PTFE-sleeved, for use with MP-AES and ICP-OES instruments (without diluter). Application: For Use With MP-AES & ICP-OES Instruments (Without Diluter) This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Barrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…

A range of rinse reservoirs and other autosampler supplies are available to upgrade probe rinsing capacity, giving you flexibility to improve the capabilities of the autosamplers used in your lab. Application: For SPS 3 Autosampler, Secures Transfer Tubing From Probe to Instrument on Arm of Probe…

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. …

A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 or ASX 500 Series used with earlier model instruments. Each model autosampler is…

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. …

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies capillary guide is suitable for nebulizer, which is used in Mark 7 spray chamber. Application: For Nebulizer, For Mark 7 Spray Chamber This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For…

The Agilent Technologies screw fitting sampling probe needs a capillary tube assembly to provide a secure connection to sampling instruments. Stainless steel construction offers added strength and endures heavy impacts caused from rigorous use. Application: For AS-90/90A/90plus/91/93plus/S10…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

FPM peristaltic pump tubing, yellow/yellow 12/pk. Suitable for gasoline, naptha, toluene, xylene (aromatic hydrocarbons), highly concentrated acids and bases. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The ACT-80 Atom Concentrator Tube is a quartz tube that is positioned in the air-acetylene flame to enhance the sensitivity of flame AA by 2 or 3 times when compared to that of normal flame AA. An improvement in detection limit is also achieved. This product is only available to U.S. Domestic…

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. …

The Agilent Technologies zeeman HGA contact cylinder is a perfect accessory for any THGA graphite furnace systems. Application: For Zeeman HGA 300/600/700/800/850/900 Furnaces, PerkinElmer GFAAS Systems This product is only available to U.S. Domestic Customers. For research use only, not…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies mercury absorption cell is suitable for use with VGA 76/77 continuous-flow vapor generation accessory. Application: For VGA 76/77 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.