Supplies AA General
-
Burner nitrous oxide-acet., Mark 7, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Cryogenic Accessories
Horizon ScientificPolycarbonate Box, 25 cell mini box features: Drain slots for LN2 drainage, Lift-off lid, Printed numbered grid on lid for ease of inventorying and organizing samples Fiberboard boxes with grids and dividers, 25 cell mini box, features: Drain slots for LN2 drainage Printed alignment arrows,…
-
Peristaltic Pump Tubing
Agilent TechnologiesAgilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. …
-
Inert Sample Intro Kit 4200 MP-AES, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tubing Assembly
Agilent TechnologiesAgilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: Sample Tubing, For PerkinElmer, FIMS-100, FIMS-400, FIAS-100, or FIAS-400 This product is only…
-
Nebulizer gas connector for MP-AES
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Mark 7 Burner Base O-Ring
Agilent TechnologiesThe Agilent Technologies burner base O-ring is suitable for use with Mark 7 spray chamber in all Agilent AA systems. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Nebulizer Bung O-Ring Kit
Agilent TechnologiesThe Agilent Technologies nebulizer bung O-ring kit is suitable for use with spray chamber. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Graphite Tube
Agilent TechnologiesThe Agilent Technologies HGA pyrocoated graphite tube is suitable L'vov platforms, HGA 300/600/700/800/850/900 furnaces and PerkinElmer GFAAS systems. Application: For L'vov Platforms (not Including Platform), for HGA 300/600/700/800/850/900 Furnaces, PerkinElmer GFAAS Systems This product is…
-
Air Regulator
Agilent TechnologiesThe Agilent Technologies air regulator is suitable for use with 81h-590 systems. Application: For 8-1-h-590 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Replacement onboard Argon bottle
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Nebulizer Assembly
Agilent TechnologiesThe Agilent Technologies nebulizer assembly is made from durable stainless steel material and is used for the analysis of aqueous solutions. Application: For AAnalyst 100/300/700/800 This product is only available to U.S. Domestic Customers. For research use only, not to be used in…
-
Fluorinated O-Ring
Agilent TechnologiesA number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…
-
O-Ring Kit
Agilent TechnologiesBarrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…
-
SIPS 10/20 operating supplies kit, 1/p
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Replacement FIMS Cell
Agilent TechnologiesThe Agilent Technologies replacement FIMS cell is suitable for FIMS-100/400 and PerkinElmer FIMS/FIAS instruments. Application: For FIMS-100/400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Concentric nebulizer for MP-AES
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Nebulizer Locking Nut, MP-AES s/chamber
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Nebulizer O-Ring
Agilent TechnologiesAgilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For…
-
O-Ring for Seal Plug in End Cap Assembly
Agilent TechnologiesThe Agilent Technologies O-ring has inner diameter of 1/8 Inch and is ideal for seal plug in end cap assembly. It is suitable for PinAAcle and AAnalyst 100/200/300/400/700/800, PerkinElmer AAS nebulizers & burner systems. Application: For Seal Plug in End Cap Assembly, For Metal Body Nebulizers,…
-
Nebulizer Spring
Agilent TechnologiesNebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For…
-
1B Connector
Agilent TechnologiesThe Agilent Technologies 1B connector with nipples is compatible to use with 2.4 to 3.2 mm OD tubing. Application: For 2.4 to 3.2 mm id Tubes, for FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use…
-
Burner System O-Ring
Agilent TechnologiesAgilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For…
-
Nebulizer Assembly
Agilent TechnologiesThe Agilent Technologies nebulizer assembly is made from solid stainless steel material and is used for the analysis of aqueous solutions. Application: For Aqueous Solutions, for AAnalyst 100/200/300/400/700/800, PerkinElmer AAS Instruments This product is only available to U.S. Domestic…
-
Peristaltic Pump Tubing for MP-AES
Agilent TechnologiesSimple ordering of peristaltic pump tubing for your MP-AES instrument saves time when provisioning your routine instrument maintenance. Agilent top-quality peristaltic pump tubing allows you to find the appropriate product to handle any matrix. Whether it is PVC, Solvaflex, FPM Viton, or Marprene,…
-
VGA tubing acid flexible 0.081in id 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Blanking plug for neb. block, PEEK, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Inlet Air Filter Kit
Agilent TechnologiesAgilent 4107 nitrogen generator. Comprises replacement filter elements to suit the integrated air filter attached to the side of the Agilent 4107 Nitrogen Generator. Application: For MP-AES This product is only available to U.S. Domestic Customers. For research use only, not to be used in…
-
M Adapter
Agilent TechnologiesThe Agilent Technologies 6.4 mm M adapter consists of an external thread that provides good connection and ensures a leak-tight seal. Application: For 4 mm OD Nipple This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
C Nipple
Agilent TechnologiesAgilent adapters with internal thread, adapters with external thread, and connectors for PerkinElmer FIMS/FIAS systems are equivalent to genuine adapters and connectors for PerkinElmer FIMS/FIAS systems. You can be confident that these adapters will integrate seamlessly with your PerkinElmer…
-
Tubing Assembly
Agilent TechnologiesAgilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: Sample Tubing, For PerkinElmer, FIMS-100, FIMS-400, FIAS-100, or FIAS-400 This product is only…
-
Mark VI Spray Chamber Mixing Paddles
Agilent TechnologiesThe Agilent Technologies mixing paddles are suitable for use in Mark VI spray chambers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.