Ace Glass Lab Glassware
-
Tubing connector, used to connect flexible tubing (1/4", 3/8", 1/2", 3/4", 1"ID) to #7, #11, #15 or #25 Ace-Thred for easy, safe connect/disconnect. 5029/7506 Nylon bushing slides over serrated end and secures PP connector in thread with silicone O-Rin
-
Adapter, Straight Connecting
Ace GlassStraight connecting adapter with inner or socket top and outer or ball bottom.
-
Distilling Head
Ace GlassNewman stopcock facilitates reflux ratio adjustment and reduces hold-up on walls; product drops directly into receiver. Stopcocks are arranged for convenient manipulation and are placed so that the head may be used in either right or left-hand setup. T
-
Adapter, pH Probe Tube, Pilot Plant
Ace GlasspH probe adapter tube extends the probe deep within large capacity flasks. Fits in 45/50 opening on head and is vertically adjustable along its length. Available with either Chemraz or Fetfe o-rings and in 24 in(61cm), 36 in (91cm), or 48 in (122cm) le
-
Stirrer Blades, Glass, 10mm Shafts
Ace GlassGlass stir blades for 10mm OD button type stir shafts. 10mm OD stir shafts can be found in our 8068, 8070, 8074 and 8075 series.
-
Glass standard taper and spherical joint adapters featuring a vertical ground glass sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.
-
Tube, Capillary Gas Delivery
Ace GlassMicroscale bent capillary gas delivery tube for transferring gases generated during reactions to storage containers, such as 9588 Sampling Reservoir. With inner joint.
-
Drying Apparatus, Abderhalden
Ace GlassVacuum, improved form. Material to be dried is placed in the inner tube, 15.2cm long by 25.4mm I.D. When the liquid in the distilling flask boils, the vapors pass through the drying chamber and heat the inner tube at a constant temperature. The vapors then ascend to the reflux condenser, condense…
-
Glass standard taper and spherical joint adapters featuring a right angle ground glass sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.
-
Adapter, Distilling, Ace-Thred
Ace GlassFor connecting distilling column with vertical condenser. Top has #7 Ace-Thred for use with 5029 bushing and adjustable length thermo-meter. Side arm at 75 degree, vertical side arm 17.8cm from center tube. Supplied complete with 5029-10 Nylon bushing and FETFE O-Ring.
-
Adapter, 75 degree Angle, #7 Ace-Thred
Ace GlassWith standard taper inner joint at bottom and side. Top has #7 Ace-Thred for use with 5029 Nylon bushing and adjustable length thermometer. Supplied complete with 5029-10 Nylon bushing and FETFE O-Ring.
-
Distilling Receiver
Ace GlassCalibrated to contain. Supplied in 10mL capacity with 0.2mL subdivisions.
-
Tube, Craig Recrystallization
Ace GlassMicroscale Craig tube for recrystallizing small quantities of reaction product. Craig tube recrystallization consists of a glass outer tube with non-uniform grind to purposely allow leakage, and a PTFE inner plug*. This plug eliminates breakage normally experienced with glass plugs. Volume stated…
-
Sublimation Apparatus, Vacuum
Ace GlassA semi-micro sublimer used by a number of synthesis laboratories. The proportions have been found to be optimum for handling a variety of crystal types. The circulatory stem may be removed and collecting tube filled with dry ice, acetone, etc. Complete unit consists of body, head and circulatory…
-
-
Photochem Reactor, Plain & Jacketed
Ace GlassReaction Vessel constructed of borosilicate glass to accommodate the 7854, 7856 or 7857 Immersion Wells. With one 14/20 angled joint for sparger tube, one 24/40 vertical joint for condenser and one #7 Ace-Thred side arm for thermometer. Center joint is 60/40. Bottom of reactor is flat to allow use…
-
Quartz immersion well, triple-walled, 60/40 inner joint for use in our 7841 and 7844 series photochemical reactor bodies. Designed for low temperature reactions cooled up to -78 degrees C. The outer two walls are permanently sealed and evacuated. The inner removable tube set consists of one each…
-
Adapter, Offset
Ace GlassOffset adapter with outer joint top, inner joint bottom. Some include drip tip.
-
Distilling Head, Magnetic
Ace GlassStraight adapter with the addition of a 75 degree side arm. Bottom and side are inner joints, outer joint top.
-
Filter Reactor, Plain
Ace GlassComplete filter reactor assembly allows single or multi-step reactions and filtrations in the same vessel. Features heavy wall glass, interchangeable filters, mechanical agitation and 4" or 6" Duran flanges. Available capacities from 150ml to 6000ml. P
-
Complete with all parts needed for immediate operation. Borosilicate glass reactor has a 60/40 center joint, one 14/20 angled joint for sparger tube, 24/40 vertical joint for condenser, and one #7 Ace-Thred for thermometer. Volumes indicated are total volumes. Volume in reactive area of lamp is…
-
Adapter, Splash Guard, Firestone
Ace GlassMedium length joints, top and bottom, that will accept full length joints. When inserted into flask, splash guard combines with flask neck to give best protection against pot splash up. Overall height is kept to a minimum to effect best distillation.
-
Straight connecting adapter with standard taper inner joints at both ends. Various lengths.
-
-
Photochem Reactor, Ace-Thred, Plain
Ace GlassGlass, unjacketed reaction vessel design for use with our 7874 quartz and 7875 glass immersion wells. Instead of a standard taper joint, this reactor utilizes a height-adjustable, non-freezing #50 Ace-Thred. Also featured, a 14/20 angled joint for a sparger tube, a 24/40 vertical joint for a…
-
Adapter, Spherical to Standard Taper
Ace GlassTransition adapter to convert a spherical ball or socket 2 joint to a standard taper inner joint.
-
Distilling Receiver
Ace GlassDistillation apparatus for obtaining separate fractions while maintaining constant pressure. Code -10 complete unit features ground joints and four 9458-02 5ml flasks. Code -25 complete unit features PTFE clad joints and four 9458-02 5ml flasks.
-
Storage Tube, Schlenk
Ace GlassSimilar to No. 7759, except with 2mm bore PTFE stopcock on 20 and 80mL sizes, 3mm bore PTFE on 250mL size. In addition to collecting and filtering, this vessel may be used as a crystallizer. With two standard taper 14/20 or 24/25 outer joints and two standard taper 14/35 or 24/40 inner. With…
-
Joints, Drip Tip
Ace GlassStandard taper inner joint with an unconstricted 30 degree angle drip tip extending from bottom of joint.
-
Glass standard taper joint adapters featuring a drip tip and right angle tee ground glass tube sidearms. The sidearms are used to make tube compression fitting connections to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.
-
Adapter, Gas Inlet
Ace GlassSide tube with hose connection. Stem below joint is 175mm. Hose Conn. size D. Available in 24/40 and 29/42 standard joints or 35/25 spherical joints.
-
Distillation Apparatus
Ace GlassWith 10/30 joint for a 25 mm immersion thermometer. All other joints are 14/20. Hose connections project to rear. Round-bottom and pear-shape flasks supplied with complete unit are 25mL capacity. Hose connections on still are size A.