Ace Glass
-
Condenser, Reflux, Spiral
Ace GlassSpiral coil, reflux condenser with angled top outer joint and two equal side arms with size C hose connections.
-
Bushing, Nylon or PTFE
Ace GlassNylon or PTFE bushings for use with any #7 Ace-Thred. Solid bushings are not stoppers (see 5803,5846) but are intended for drilling custom diameter holes. Ferrule designed bushings can be used with either 11710-03 PTFE ferrule for 1/8 inch OD tubes, code -05 for 3/16 inch OD tubes or code -07 for…
-
Round bottom, single neck flask with a beaded tube end well.
-
-
Thomas Nos. 1165M15, 1165M16, 1165M17, 1165M18, 1165M19, 1165M20, 1165M21 Jacketed cylindrical flask with flush seal and beaded pipe²inlet and outlets. The flask is graduated on both sides²which allows for either left or right hand orientation.²Features a Schott-Duran style o-ring…
-
Air Sampling Cane, with Funnel
Ace GlassAir sampling cane with funnel at one end to avoid water droplets from collecting at edge and being sucked into manifold train. Bulge above the funnel is for glass wool or similar material to allow for filtering of particulates. Codes -22 & -26 feature a #7 Ace-Thred port for introducing calibration…
-
Glass, jacketed reaction vessel design for use with our 7874 quartz and 7875 glass immersion wells. Instead of a standard taper joint, this reactor utilizes a height-adjustable, non-freezing #50 Ace-Thred. Also featured, a 14/20 angled joint for a sparger tube, a 24/40 vertical joint for a…
-
For use as column end fitting that allows connection of appropriate size Ace-Thred to tubing connectors with NPT threads. Available in various Ace-Thred and NPT sizes. Most come complete with both a 100 micron and a 350 micron polyethylene filter.
-
Bearing, Trubore, Economy, 6mm
Ace GlassTrubore bearing, heavy duty, standard taper joint, self-aligning. Unique design is forgiving of slight misalignment of stir motor and shaft. Recommended for use with our 9534 6mm precision ground stir shaft.
-
Shake style culture flask with long style straight neck, accomodates either plastic or stainless steel closures. Without baffles.
-
The DynaBloc heating system supplies low-cost, highly efficient, simultaneous stirring and/or heating of multiple samples contained within various sizes of small, vials and tubes. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm)…
-
Chromatographic Column, 1:5 PTFE Plug
Ace GlassChromatographic column with integral reservoir at top, and 2 mm bore 1:5 taper PTFE stopcock plug at bottom. Opening at top is either 24/40 outer joint or opening for #3 stopper. Available with or without porosity B (70-100micron), fritted disc sealed in.
-
Round bottom flask with five necks arranged 3 in-line, two 90 degrees front and back of in-line necks. All necks are vertical. Available in heavy wall.
-
Turntable Reactor, Photochemical
Ace GlassAce photochemical reactor turntable for the determination of relative and absolute quantum yields. Variable height disc holds 13mm OD sample tubes, 33 in outer circle, 18 inner. Unit will hold up to four 7891 series square filters. Complete unit includes motor and control, CE rated. Not included:…
-
Adapter, Gas Inlet
Ace GlassWith 24/40 standard taper inner and outer joints and side hose connection size D.
-
Hydrogenation/Gas Apparatus I
Ace GlassParr Model 3911 Hydrogenation unit for working volumes of 1ml to 200ml . Ace-thred vessels replace rubber stoppered vessels and eliminate cross-over contamination caused by leeching or sample retension. Complete unit includes all adapters needed for the supplied 8648 series bottles…
-
Impinger, Greenburg-Smith
Ace GlassA high velocity impinger for the determination of dust concentration in air or other gases. Total volume is approximately 500mL. Bottle joint is 45/50. Inlet/outlet are 12.5mm O.D. Modified versions available with spherical joints both vertical for connecting in series. Available with or without…
-
Replacement receiving flask adapters for Buchi rotary evaporators. Joins steam tube to receiving flask. Combi-clip not included.
-
Condenser, Graham
Ace GlassWith standard taper 24/40 inner and outer joint at bottom and top. Hose connections are size D, for 3/8in ID tubing. con-nections are size D.
-
Distilling Column, Vigreux
Ace GlassWith male drip tip on joint of Claisen side arm and 10/30 joint for 25 mm immersion thermometer. Other joints are 14/20.
-
Adapter, Socket Joint
Ace GlassAdapters for joining jacketed reactor ball joint inlet/outlets to recirculator hoses. 28/15 and 35/25 sockets with various Ace-thred and tube ends.
-
High vacuum stopcock with Tef-Cap O-Ring seals with variable openings from 0-3 to 0-10mm. Eliminate exposure to corrosive materials. For use to at least 13.6 Kg internal pressure. An ultimate vacuum of 10-7 can be realized with the standard three seals
-
Flask, Two Necks, Pear-Shaped
Ace GlassPear-shaped, with side arm for use with 9095 rubber thermometer adapter. Joint is 14/20.
-
Distillation Apparatus, Trap-to-Trap
Ace GlassUsed for the removal of solvents or other volatiles by vacuum distillation at ambient temperature. When used with Schlenk reaction Vessel, No. 7756, the trap prevents excessive loss of solution in the event of a bump. The distillate is collected in a No. 9477 pear shaped flask or other suitable…
-
Basic Kit II, Deluxe Kits
Ace GlassBasic MICRO/MINI-LAB KIT, Deluxe MICRO/MINI- LAB KIT's. Basic kit will do the majority of experiments in Organic Laboratory Tech-niques, Deluxe kits will do all experiments. Kits come with variety of components such as vials, condensers, tubes, the NEW Hickman-Hinkle spinning distillation…
-
304 Stainless Steel adapter for matching glass beaded process pipe to female NPT fittings, gauges and flanges.
-
Gas Reservoir
Ace GlassGas collecting reservoir, described in Microscale Organic Laboratory, Mayo, Pike, Butcher, as a means of collecting and sampling gaseous products when using 9586 Capillary Gas Delivery Tube. Open-bottom tube has single line graduation at 3 and 4mL level and 20-400 thread at top. Supplied with cap…
-
Zero holdup, no-splash short path still for small quantity distillations with the accuracy of larger setups. Improved design eliminates even the minimal holdup experienced with original short path stills by further reducing wetted surfaces and travel p
-
Rubber Bulb & Release Tube
Ace GlassConsisting of rubber bulb and polyethylene release tube. For use with (Thomas Nos. 1169W70-76).
-
Precision ground glass stirring shafts,10mm OD, crescent type. Useful for stirring viscous materials at low rpm. Available for round bottom flasks of 1, 3 and 5 liters. Code -19, 3 liter size will fit a 2 liter flask, but closely. Flask opening must be 29/42 or larger. Use with Trubore bearings…
-
Duran styled flange without o-ring groove.
-
Bearing, Trubore, High Vacuum, 10mm
Ace GlassThis bearing is the standard liquid seal type except that the use of Trubore tubing enables this unit to perform very satisfactorily under high vacuum conditions. Use our precision ground stirring shafts (8068,8070,8071,8073,9532,9533).