3621 Carver® Model C: Full-size 12-ton (10.9 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Manually controlled. Ideal for pressing sample pellets for XRF, IR, and other analytical techniques. Typical samples include cement,…

For 6801 and 6871 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. Sold in units of 4. NOTE: These products are only available for sale to Domestic U.S. Customers.

Polycarbonate vial with screw-on cap, 1 1/8 in. diameter x 4 ½ in. (2.9 cm x 11.4 cm). Holds grinding media up to 1/2 in. Fits 2196-16-PE Holder and 2664 Cryo-Block. Grinding load per vial 20 mL. Sold as a pack of 48 Vials with 48 caps (2253C).

Mid-Size Cr-Free Grinding Vial Set: For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6881C). Vial set consists of one complete vial and three spare cylinders. Sample capacity up to 25…

These cryogenic gloves are designed to protect the hands and arms from the hazards associated with ultra-cold materials. Highly recommended when operating the 6770 and 6870 Freezer/Mills. These multi-layer-insulated gloves are lightweight and flexible, allow excellent dexterity, and are comfortable…

Pre-loaded 2 mL disruption tubes are ideal for fast and simple setup - add samples and you're ready to go. Vials are self standing, making it easier to add samples. Pre-filled with your choice of molecular biology grade silica beads, acid washed silica or zirconia beads, silica beads, or steel balls.

Hardened Steel Grinding Container: Grinding container with puck, dish, and lid made of 52-100 hardened tool steel. 6.9 in. diameter x 2.9 in. high, 17.5 lbs. (17.5 cm x 7.5 cm, 8 kg). Nominal volume 340 mL, recommended grinding load 20-50 mL. Includes puck, ring, dish with Oring gasket, and lid. …

Each 6870 Freezer/Mill® is supplied with your choice of 6870L Large Vial Accessory Package or 6870S Small Vial Accessory Package. The 6870 Freezer/Mill® can hold up to four small vials* (6751, 6761, 6771) or one mid-size vial (6881, 6883, 6885) The Accessory Package for mid-size vials must…

For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonate-encapsulated steel. Set includes one complete vial plus three spare center sections. Sample capacity 0.5 mL to 4.0 mL

Large Stainless Steel Center Cylinder for 6801: For 6801 Vial Set. Used in place of 6801C when polycarbonate cylinder is not compatible with sample. Made of nonmagnetic stainless steel. Extractor/Vial Opener for Large and Mid-Size Grinding Vials: The Extractor/Vial Opener lifts vial sets in…

Disposable closed X-ray cell with collar used throughout theworld for fast, dependable, reproducible running of liquidsamples in XRF spectrometers. Includes a polyethylene snap-ringand cup with snap-post vent and reservoir. Requires thin windowfilm. Sold in bags of 100. Features …

Frosted polyethylene vial with screw-on polyethylene cap. The nominal outer diameter measures 1/2-inch x 2-inch long (12.7 mm x 50.8 mm). Holds one 3/8-inch (9.5 mm) stainless steel grinding ball (#2155). May be used with the Cryo-Block (#2663) and the vial holder (#2191). Grinding load per vial is…

Shallow, thin-walled aluminum cap for reinforcing XRF pellets. Commonly used in the production of pressed power sample disks for XRF but also used for OES and other analytical techniques. Forms the bottom and sides of the finished pellet. Features Makes sample disks easier to remove from…

For 6751 vial set; sold in units of 4. Also sold in units of 20. Polycarbonate is durable but should be cleaned with hot water and detergent, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

The 6775 Freezer/Mill® is a small cryogenic mill that processes samples ranging from 0.1 - 5 grams. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. The new high resolution display is user-friendly and…

Vial sets are an alternative to titer plates. These vial sets are pre-cleaned with grinding balls included. They come in sturdy carriers that have about the same footprint and height as deep-well titer plates, and fit the Geno/Grinder Clamp. Vials can be filled and sealed individually, and the…

Kapton® thin window film for XRF liquid sample cups. 0.3 mil (8µm) thick. Supplied as continuous roll 2-7/8 in. (73 mm) wide, 50 ft. (15 m) long. FEATURES Often considered the closest thing to a “bombproof” XRF window film Incredibly strong and heat resistant…

The 1600 MiniG® is the ideal solution for labs that want a compact yet powerful tissue homogenizer. This mechanical disruptor is designed to effectively disrupt cellular materials by oscillating one or two deep-well titer plates vertically. Clamp typically holds up to 6 x50 mL vials or 48 x 2…

The 6875D Freezer/Mill® is a high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This mill…

Acid washed grinding beads are treated to remove fine particles and contaminants. Sold in package of 100.

Steel Ball Set, 2 x 1/2 in & 4 x 1/4 in: Two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls for SPEX SamplePrep 8001 and 8009 Vial Sets. Polystyrene Vial w/Screw-On Cap: For wet or dry mixing of liquids and powders. Vial size 21/8 in. (5.4 cm) diameter x 21/2 in. (6.7 cm)…

2190 Vial Rack : Holds 24 3116PC vials, 24 2241-PC vials, or 24 2241-PE vials. All three vials hold a single 3/8 in. (9.5 mm) steel grinding ball 2195 Large Capacity Clamp Assembly : An oversize clamp that will hold centrifuge tubes or a double load of titer plates. Designed to hold twelve…

NOTE: These products are only available for sale to Domestic U.S. Customers.

Deep-well reinforced titer plate with a 96-well format. Each square well has a volume of 1.4 mL and a working volume of 1.0 mL. Compatible with our 2010 Geno/Grinder due to the toughened wells that withstand bead beating. This plate can also be used with the 1600 MiniG.

Multiple Sample Adapter for Seven 1/2 Inch Vials: Holds seven vials, each 1/2 in. (12.7 mm) in diameter, for simultaneous running in 8000M Mixer/Mill®. Suitable vials include SPEX SamplePrep 3111, 3114, 3116 and 3117. Vials run at one time should be same length. Can be used in 8000D…

High-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst…

A holding station for samples which must be kept chilled to preserve RNA for extraction. The insulated outer jacket of the Cryo-Station is chilled with liquid nitrogen and can be filled automatically or manually. Two titer plates can be placed in the Cryo-Station well to be filled and kept cold.…

Large ceramic grinding cylinders with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

2100 Grinding Ball Dispenser: Simultaneously dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates. 2110M 24-Pin Magnet: 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm)…

6906 Short Cryogenic Transfer Hose: 4 ft. (1.2 m) long flexible stainless steel hose suitable for transferring cryogenic fluids such as liquid nitrogen. Fitted with a 3/8 in. (9.5 mm) NPT male fitting on one end and a CGA295 female fitting on the other end. Compatible with the 6905 Portable…

Molecular Biology Grade Grinding Beads are treated to inactivate contaminating enzymes and have been tested accordingly. Low Binding Grinding Beads are coated to reduce non-specific binding of nucleic acids and proteins and are used for lysing dilute samples of cells. Acid Washed Grinding Beads are…

2 mL reinforced polypropylene, self standing microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64-inch x 1 27/32-inch long (10 mm x 47 mm). Grinding load per tube 60-120 mg, mixing load 1 mL. Sold in package of 200. Vials can be filled and sealed individually…