SP Bel-Art, Supplies
-
Poxygrid® Labware Drain Stand
SP Bel-ArtDry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all)…
-
Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…
-
Scienceware® Stirring Bar Retrievers
SP Bel-ArtEasily recover stirring bars from containers using the Spinbar® Magnetic Retriever. Offered in two different lengths (12" and 18"), each retriever has a polyethylene rod, 9.5 mm diameter, with Alnico magnet sealed in one end and loop on opposite end.
-
Scienceware® Polypropylene Pipet Racks
SP Bel-Art28-Place Holds 28 pipets in vertical position Pipets fit into 2 discs connected by central support column Upper disc has 10 holes, 14 mm in diameter and 18 holes, 11 mm in diameter Lower disc has 28 holes, 4 mm in diameter to support pipet tips Overall height 7"; diameter 7"H …
-
Economical and convenient, this benchtop disposal system is perfect for collecting pipette tips, microcentrifuge tubes, etc. during daily use. Rectangular steel wire frame holds a polyethylene bag 22 x 28cm (8-1/2 x 11"); coated in easy to clean, durable, orange color epoxy …
-
Scienceware® Magnetic Stirring Bar Arrester
SP Bel-ArtPrevents Stirring Bars from Pouring Out When Emptying Containers The Magnetic Stirring Bar Arrester holds your stirring bar in place when pouring from a beaker or flask by placing the arrester against the bottom of the container. 9.5mm (3/8") thick polyethylene 51mm (2")…
-
Scienceware® Pinch Valves
SP Bel-ArtControl Fluid Flow without Drips Pinch valve allows control of fluid flow without drips. Squeeze soft silicone body to permit flow Release pressure to suspend flow Withstands approximately 16 lbs. of pressure Made of Teflon®, stainless steel and polypropylene for maximum…
-
Pulverize tissue and extract DNA or RNA from tiny tissue samples within a microcentrifuge tube. Stainless steel mortar has a welded fixture to hold a 1.5ml microcentrifuge tube. The mortar is suspended above a stainless steel cavity which holds the liquid nitrogen and is nested in a heavily…
-
Poxygrid® 96-Place Test Tube Racks
SP Bel-ArtMaintain the 96-Place Format of High Throughput Applications with Large, 15mL Test Tube Capacity Ideal for mimicking the 96-place format used in microplates, deep-well plates and other tools configured for drug discovery and robotic applications. Flow-through design allows rapid…
-
Easily loaded and emptied from the top Single or three stack For 100-mm diameter dishes Epoxy-coated steel wire rack has a wide front opening that permits easy access but prevents dishes from sliding out. Not suitable for glass petri dishes. Dimensions for single stack rack (L x W x H): 108 x…
-
Scienceware® Flowmi™ Cell Strainers
SP Bel-ArtScienceware® Flowmi™ Cell Strainers provide fast and efficient filtering of small volume samples (up to 1000µl) and are unmatched at preserving sample volume. These sterile, 40µm or 70µm porosity strainers remove cell aggregates and create uniform single cell suspensions…
-
Polygon Spinbar® Magnetic Stirring Bars
SP Bel-ArtThese stirbars have polygon multifaceted surfaces that add turbulence relative to similar smooth size cylindrical bars. Center molded pivot ring minimizes the contact area between the bar and the vessel; reduces friction and chattering Marring of plastic containers is diminished …
-
Poxygrid® Glove Dispenser Racks
SP Bel-ArtConvenient wire racks keep disposable glove or tissue boxes handy Internal dimensions of individual compartment: 12.7cm W x 9.5cm D (5 W x 3-3/4" D) Racks available for 1, 2 or 3 boxes Each box is held in its own compartment and can be easily replaced Durable epoxy coated steel wire…
-
Spinvane® Triangular Magnetic Stirring Bars
SP Bel-ArtSpinvane® Magnetic Stirring Bars triangular shape is designed for small conical-shaped tubes and micro vials. Triangle shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Each size is manufactured for a specific size tube;…
-
Vacuum Aspirator Collection System
SP Bel-ArtThis compact, portable system is ideal for vacuum aspiration of a variety of liquids, including tissue culture media, supernatants, and chemical wastes and is available with the original strength or HiFlow pump. Self-contained system with 1.0 gallon bottle, tubing and vacuum pump is…
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-Art50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…
-
Scienceware® Tubing Clamps
SP Bel-ArtScrew Clamp Offers on/off and fine control so accurate it replaces stopcocks in many applications Can be installed without disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm…
-
Polyethylene Easy-grip handle and screw cap Leakproof shipping and storage
-
Scienceware® Large Pails
SP Bel-ArtAvailable in yellow polyethylene or autoclavable translucent polypropylene, these 13.2 liter (14qt) pails have a snug fitting lid and plated steel bail. Each bucket is 32cm (12-3/4") high with a 27cm (10-1/2") I.D. at top 7290F45 pail and cover are steam autoclavable at…
-
Spinring® Magnetic Stirring Bars
SP Bel-ArtSpinring® stirring bars provide maximum stabilization of the magnetic stirring bar with the addition of a removable “hoop” around a standard octagonal bar. Best suited for larger open-neck vessels, such as buckets and beakers Friction fit of the "hoop" and…
-
Exceptional Clarity for Phase Interface Visibility Durable, polypropylene plastic translucent separatory funnels are resistant to most chemicals, including hydrofluoric acid. Features a 4mm stopcock plug of non-stick PTFE and screw cap closure Steam autoclavable (except stopper) at…
-
Automatic Self Zeroing Burettes
SP Bel-ArtAccurate and Economical Liquid Dispensing Avoid outside contamination with this highly accurate closed system. Borosilicate glass burettes have white 0.1ml graduations and are mounted to a high-density polyethylene screw cap Squeezing the flexible polyethylene bottle forces liquid…
-
Multi-Purpose Flexible Arm Stand
SP Bel-ArtFlexible arm with molded acetal copolymer links has ball-and-socket joints. One end is designed to accept the 0211G32 Electrode Holder (sold separately) while the other has a 1.3cm (1/2") diameter stainless steel pin for attachment to the weighted base or a suitable clamp. …
-
Utility Trays
SP Bel-ArtStraight sided, heavy duty trays are made of polypropylene plastic. Resistant to temperatures up to 135ºC (274ºF) Autoclavable
-
Scienceware® Quick Disconnects
SP Bel-ArtConnect same or different size tubing with these polyethylene plastic connectors. Ideal for vacuum applications, water lines, manometers, and more 1226C59 & 9583M13 (F19730 series) connects same size tubing 9583M43 (F19731-0552) connects different size tubing
-
Scienceware® Coplin Staining Jars
SP Bel-ArtThis polypropylene jar improves on the classic tapered square design with a larger opening for easier placement and removal of slides. The polypropylene screw cap is 5.3cm in diameter, has a flat top, easy grip knurled edge, deep thread and a seal ring to prevent leaks. Five internal slots…
-
Low-density polyethylene wash bottles offer different colors of polypropylene closures for quick, at-a-glance identification of contents. Choose from Natural, Red, Yellow, Blue or Green caps.
-
Scienceware® Table-Top Buchner Funnels
SP Bel-ArtFilter large volumes quickly Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (1/2") I.D. tube and threads into 3/4" NPT bung on the…
-
Scienceware® Pipet Support Rack
SP Bel-ArtHolds 12 pipets Polyethylene construction Pipet support rack supports pipets horizontally without putting pressure on fragile tips. Rack holds 12 volumetric or graduated pipets from 1 mL . The polyethylene support measures 241 mm L x 178 W x 292 H (9 1/2” x 7” x 11…
-
Multipurpose Polypropylene Trays
SP Bel-ArtThese large capacity, rugged polypropylene plastic trays have multiple uses around the laboratory. Substantial depth and 8.5 liter (9 quart) volume makes them useful for holding a large quantity of samples in a water bath or on ice Ideal for holding instruments while autoclaving; steam…
-
Microcentrifuge Floating Racks
SP Bel-ArtCompact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")
-
Self-Adhesive Waste Bags
SP Bel-ArtHang Anywhere for Easy Waste Collection Disposable, white waste bags free bench or hood space when hung from walls, cabinets or virtually anywhere. Peel backing off the adhesive strip across the top and hang close to your work area Back panel is longer than the front for easy…