SP Bel-Art, Equipment
-
This fluid delivery system features a built-in eye cup that allows the injured person to be treated in any position, whether standing, sitting, or lying down and provides effective and immediate eye irrigation. Quick instruction diagrams on the bottle and station confirm how to use the eyewash…
-
Dry-Keeper™ Stacking Desiccator Cabinet
SP Bel-ArtStack up to Five Units Perforated shelves are movable to suit your dry storage needs in this desiccator cabinet that stacks up to 5 units high. Smoke-tinted, polystyrene Two removable shelves can be set at four heights Pull down door slides out of the way into a compartment…
-
Frigimat® Cub- Dry Ice Maker
SP Bel-ArtEconomical Block Dry Ice Maker for On-Demand Easy to set up and use, this compact device saves the time and expense of receiving a dry ice delivery. Can be attached to a liquid CO2 cylinder (not included) equipped with a dip tube to produce a ready-to-use 250 to 350 gram block of…
-
Scienceware® Large Molded Fume Hood
SP Bel-ArtThis fume hood features a one-piece shell molded of polyethylene plastic with a clear acrylic sash that slides on inside tracks. Sash can be set in an open, closed or intermediate position; remains open slightly when in closed position to facilitate continuous air flow Front opening is…
-
Secador® 2.0 Vertical Desiccator Cabinets
SP Bel-ArtThe attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and light sensitive products. Choose from an extensive selection of sizes, styles and colors of desiccator cabinets to meet your specific dry storage…
-
Techni-Dome® Gas-Purge Desiccator
SP Bel-ArtFor contamination and dust-free desiccation, storage and degassing Contents can be viewed clearly from 360º Durable, chemical resistant polycarbonate construction stores oversize or large amounts of moisture-sensitive items in a very dry, dust-free environment It is useful for…
-
Scienceware® Pinchcock Tubing Clamp
SP Bel-ArtOne piece pinchcocks molded of autoclavable white polycarbonate Release by thumb pressure 2848W26 Mini Clamp is single position on-off clamp; for use with thin-wall tubing less than 3/16” o.d. 2848W30 Clamp is 15-position ratchet- type for one-hand, stepwise flow control…
-
The door seals against a foam rubber gasket and is held closed with two roller latches. The open door glides underneath the cabinet to maintain the cabinet's small footprint. Dimensions: 21 x 18 x 13cm (81/4 x 7 x 5") I.D. door opening 19 x 11cm (71/2 x 43/8"). A jar of silica gel…
-
Clips for Beakers and Pitchers
SP Bel-Art0209X58: Tubing Holder for Beakers This polypropylene plastic clip holds flexible tubing steady and fits securely onto the edge of beakers or pitchers up to 1/4" thick. 5.1cm (2") long arm has a hole to accept tubing up to 9.5mm (3/8") O.D. Autoclavable …
-
Minipet™ Pipettors
SP Bel-ArtMinipet™ Pipettors feature a three-way check valve for continuous, repetitive pipetting. Just place the filling line in a reservoir, push the Teflon® plunger to dispense and release to refill. Molded polypropylene handle offers comfort for extended use Turning the knob on top…
-
Scienceware® Lattice Support Stand
SP Bel-ArtExpand your options in the laboratory Even distribution rods for maximum capacity of items Extended polypropylene base allows for extra items to be added Rigid, solid aluminum rods provide extra support for small lightweight items such as glassware as well as heavy items such as…
-
Clear and durable PVC desiccator cabinet has sleek black ABS accents, vertical profile, and movable shelves for adjusting dry storage space configuration for moisture-sensitive materials. Generous 2 cu. ft. interior volume Three adjustable, removable, and perforated shelves facilitate…
-
Scienceware® Shelf-Mounted Pipet Rack
SP Bel-ArtPiRack™ keeps pipettors right at your fingertips Attaches to any shelf or benchtop edge Place at several work locations in your lab Expands to store all of your pipettors Use with most pipettors such as Gilson® PIPETMAN®, Oxford® BenchMate®, Biohit Proline® or Eppendorf®. This sturdy…
-
Scienceware® Gas Dispersion Tubes
SP Bel-ArtFeatures Fritware® Porous Polyethylene Disc High-density polyethylene bell-mouthed fitting with a sealed-in, coarse porosity polyethylene disc at the large end results in smaller bubbles. 30.5cm long (12") x 6.35mm ID (1/4") low-density polyethylene tube is fitted to the…
-
Scienceware® PE Poly-Hand Pumps
SP Bel-ArtThe Poly-Hand Pump threads directly to a standard drum bung or carboy. It is constructed entirely of rugged polyethylene and is inert to strong acids, alkalis and many solvents. Delivers by positive pressure on the downstroke of the piston; does not pressurize the vessel Ergonomic…
-
Scienceware® Replica-Plating Device
SP Bel-ArtLow-Cost, Accurate Method of Colony Replication Utilizes a locking ring which secures sterile velveteen squares onto a PVC cylinder for easy control of the plating device. To produce replicas, the Petri dish carrying microbial colonies is inverted and lowered onto the cloth surface, then…
-
Scienceware® Tubing Clamps
SP Bel-ArtScrew Clamp Offers on/off and fine control so accurate it replaces stopcocks in many applications Can be installed without disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm…
-
Silicone Loop Ties
SP Bel-ArtUse these adjustable "rubber bands" for bundling, binding, color coding, securing columns and burettes, controlling flexible tubing, keeping foil covers on canisters, and securing dialysis or biohazard bags. Remain flexible from -46°C to 121°C (-50°F to 250°F); use…
-
Secador Refrigerator Ready Desiccator
SP Bel-ArtUnique features like an extra-long body and pull-out shelves make the Scienceware® Secador® Refrigerator Ready Desiccator perfect for use inside refrigerators and -20C freezers letting you keep materials cold when needed, and moisture free. A specially designed shelf at the top of the…
-
Secador® 2.0 Gas-Purge Desiccator Cabinets
SP Bel-ArtThe attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and UV sensitive products. Choose from an extensive selection of sizes, styles and colors to meet your specific dry storage needs. Durastar®…
-
Sturdy steel, A-shaped rack Plates rest on rubber supports Rubber pads prevent sliding Three of the rack’s ten slots are wide enough to hold double plates. Constructed of steel with a baked-on epoxy coating. Minimum width of the plate supported is 6 1/2” (16.5 cm).…
-
Mouse Restrainer with Dorsal Access
SP Bel-ArtThe Safe, Fast, and Accurate Way to Work with Mice Feature rich and budget friendly, this high throughput Mouse Restrainer with Dorsal Access takes care of the basics, so your hands are free for the important tasks. The easy-to-use entry funnel and tube with two gate positions allows quick,…
-
A single, positive latch on the door furnishes a secure seal. The door-mounted dial hygrometer provides a convenient way to measure relative humidity. Drying can be accomplished with single-use or reusable desiccant (Thomas #'s 3743C20, 3743C22, 3743C05, 0211G04). An optional under-shelf…
-
Secador® 4.0 Desiccator Clear With Gas Ports
SP Bel-ArtA door-mounted dial hygrometer permits relative humidity inside the cabinet to be conveniently monitored. The unit features convenient handles making it very portable. The instrument comes with a pair of adjustable, vented shelves. Bottom-hinged door opening is: 22.5 cm H X 41.7 cm W (16.4" H…
-
This fume hood features a one-piece shell molded of polyethylene plastic with a flat internal baffle and a clear acrylic sash that slides on inside tracks. Internal baffle across the rear of the shell slopes forward, leaving space beneath for air flow to sweep the deck, and space above in…
-
Secador® 3.0 Gas-Purge Desiccator Cabinets
SP Bel-ArtThe attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and UV sensitive products. Choose from an extensive selection of sizes, styles and colors to meet your specific dry storage needs. U.S. Patents:…
-
The attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and light sensitive products. Choose from an extensive selection of sizes, styles and colors of desiccator cabinets to meet your specific dry storage needs. …
-
Scienceware® Varipet® Pipettors
SP Bel-ArtDependable, Positive Displacement Repetitive Dispenser This dependable, self-filling pipetting aid is designed for speed, ease, and convenience and is offered in two models. Polypropylene plastic handle is ergonomically designed to permit extended use without fatigue Teflon®…
-
Scienceware® Bottle, LDPE, Pocket Eye Wash
SP Bel-ArtConvenient 120ml (4 oz) slim polyethylene bottle features an eyecup for efficient rinsing of the eye with eyewash Features a tight fitting snap-on cover The user fills the bottle with water and keeps the bottle at hand or in the optional Vikem® vinyl belt pouch. The bottle displays printed…
-
Auto Secador® Replacement Desiccant
SP Bel-ArtColor-indicating silica gel beads for use in refilling the Secador® auto-desiccator module. Unlike other desiccants, silica gel is non-friable and won’t disintegrate into powder even after repeated regeneration. Absorbs moisture from the air Inert, non-toxic and non-corrosive …
-
Scienceware® Stirrer Blades
SP Bel-ArtThis strong, non-scratch and inert FDA grade, USP Class VI Teflon® PTFE blade fits all standard button-tip stirring shafts. "Long-groove" keyhole provides easy insertion into flask neck Rotates into proper position for stirring action
-
CultureTemp™ 37°C Warming Plate
SP Bel-ArtIncrease cell viability during cell passaging with this highly accurate warming plate that keeps cells at an optimal 37°C (±°C ) outside of the incubator. The unit is water resistant and safe for cleaning with Ethanol or IPA. UL approval pending. Keep dishes outside the…
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)