Labconco, NEW! Life Science
-
FreeZone 6 Liter Console Freeze Dryers with Stoppering Tray Dryers are designed for lyophilizing moderate to large loads and stoppering vials or serum bottles under vacuum. The console features a front viewing window and interior space for a vacuum pump (sold separately). They feature a brushed…
-
Protector Stainless Steel Perchloric Acid Laboratory Hood. Designed specifically for procedures involving the use of perchloric acid. One-piece Type 316 stainless steel liner is free of joints to prevent build-up and simplify decontamination. By-pass airflow design. Built-in washdown system with…
-
Centrivap Cold Trap
LabconcoCFC-Free 4 liter stainless steel collector An epoxy coated aluminum base with an acrylic/PVC thermoplastic control panel. Reaches -55°C in less than 15 minutes. Ultra-Low Cold Trap reaches -85°C in less than 30 minutes. Ready indicator illuminates when the collector coil reaches…
-
Rapidvap N Evaporation System
LabconcoFast, unattended concentration of environmental samples Combines mechanical vortex, heat and nitrogen blow down technologies Process eight samples up to 450 mL in size at once Vortexes up to 500 rpm. Heat warms samples from ambient to 70°C. The nitrogen blow down manifold is microprocessor…
-
Clear Drying Chambers provide a convenient means to attach samples in flasks to a freeze dry system while providing visibility into the chamber during bulk drying. Chambers are available in small and large sizes, with or without valves. Chambers include clear acrylic cylinder, 1/2” thick…
-
Chemical Cart
LabconcoFully assembled from 18 gauge, 1 inch square steel tubing Have 4 inch diameter casters which absorb vibration over rough, uneven floors. Two have toe-locks. Electrostatically coated tubular steel, with tough, corrosion-resistant epoxy that will not scratch or mar doorways, walls or…
-
Protector™ Evidence Drying Cabinets
LabconcoThe durable, stainless steel-lined Protector Evidence Drying Cabinet provides a secure ventilated area to dry evidence such as clothing and bedding. The cabinet’s HEPA and carbon fi ltered exhaust protects personnel from exposure to biohazards while eliminating nuisance odors. The…
-
VACUUBRAND Diaphragm Vacuum Pumps
LabconcoVACUUBRAND Diaphragm Vacuum Pumps are sized for use with CentriVap Centrifugal Concentrators, RapidVap Vacuum Evaporation Systems and Vacuum Desiccators and have uses with many other pieces of laboratory equipment that require a vacuum source. The wetted parts of these pumps are PTFE coated for…
-
HEPA Filter Cell Bag Replacement
LabconcoReplacement Bag for Bag-in/Bag-out HEPA Filter to contain particulate matter during filter changing.
-
The Purifier Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in…
-
Filtermate Portable Exhausters
LabconcoCompact, corrosion-resistant housing Inherently safe design An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector® XVS Ventilation Station or Protector® Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters…
-
Protector Work Station Accessories
LabconcoFilters for Labconco protector work stations Impregnated charcoal filter packs remove dangerous vapors from the work area 5165N47 1 3/8” filters slip behind stainless steel grill to remove formaldehyde vapors quickly and completely
-
Guardian Digital Airflow Monitors
LabconcoGuardian™ Digital Airflow Monitor senses and alerts the operator to low airflow conditions. LCD displays actual airflow in fpm or m/sec. Audible/visual alarm alerts the user to sustained low velocity condition. Calibration instructions displayed on LCD. Each monitor also includes a…
-
PuriCare Bedding Disposal Stations
LabconcoPuriCare Bedding Disposal Stations provide a convenient, mobile system for disposing of soiled small animal bedding. Its narrow profile fits easily in crowded colony rooms. It protects the user from exposure to allergens. Nominal inflow velocity is 50-60 fpm. Exterior is epoxy-coated, 18 gauge…
-
High strength borosilicate glass withstands extreme temperatures and high vacuum. Tops feature a wide mouth opening to load fast and clean easily. Flat bottoms reduce spills and provide better balance. Lyph-Lock Seals hold top and bottom of Lyph-Lock Flasks together during pre-freezing and…
-
XPert Filtered Balance Systems provide user protection by keeping powders and particulates contained during weighing procedures. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal laminar airflow to…
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
Centrivap DNA Concentrator
LabconcoMicroprocessor control Built-in vacuum delay Memory stores 9 user-set programs DNA rotor included Benchtop cabinet houses the concentrator, DNA rotor, diaphragm, vacuum pump, two glass traps and all connecting tubing. Large chamber and rotors hold more samples. Integrated diaphragm…
-
Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white…
-
Electrical Receptacle Kit for mounting to the left or right side of a 3', 4', 5', 6', 7' or 8' Protector Premier, Xstream, XL, PVC Perchloric Acid or Stainless Steel Laboratory Hood. Includes electrical receptacle, wiring, junction box and receptacle cover plate. …
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
L-Shape Flask Adapters
LabconcoOf borosilicate glass With vented Standard Taper male joint on one end. The other end is fire polished for attaching Lyph-Lock flasks to valves.
-
XPert Balance Enclosure Stations
LabconcoXPert Filtered Balance Stations are designed to protect the user during powder weighing operations. Ducting to an outside blower is required. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal…
-
Protector XL Floor-Mounted Laboratory Hoods (sometimes called Walk-In Hoods) accommodate laboratory procedures that require oversized equipment or maximum working height. Models with horizontal-sliding sashes have a loading height of 73.5” (186.7 cm), suitable for applications requiring…
-
Protector Airo Filtered Fume Hoods
LabconcoThe Protector® Airo™ Filtered Fume Hood has a compact design that avoids potential challenges of existing lab conditions while still providing space, utility and options of a traditional hood. It features all of the characteristics of Labconco Protector Hoods including the patented…
-
Solid Epoxy Work Surfaces
LabconcoBlack chemical-resistant work surface Dished or flat Dished surfaces feature are contoured to fit the dimensions of the enclosure and to contain spills. They are compatible with Xpert Balance Systems & Filtered Balance Stations, Purifier Class I, HEPA Filtered & Filtered PCR…
-
Protector Airo Filtered Fume Hoods
LabconcoThe Protector® Airo™ Filtered Fume Hood has a compact design that avoids potential challenges of existing lab conditions while still providing space, utility and options of a traditional hood. It features all of the characteristics of Labconco Protector Hoods including the patented…
-
The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured…
-
The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured…
-
-
PrimeMate™ Oil Change System
LabconcoVacuum Pump Oil Change Made Easy Less mess Reduces the hassle and mess of changing the oil in your rotary vane or hybrid pump. Depending on your pump, the PrimeMate performs up to 4 oil changes before the clean oil container must be replaced or refilled and the used oil container emptied.…
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…