Labconco, Protein Purification Chromatography Media
-
Protector Stainless Steel Perchloric Acid Laboratory Hood. Designed specifically for procedures involving the use of perchloric acid. One-piece Type 316 stainless steel liner is free of joints to prevent build-up and simplify decontamination. By-pass airflow design. Built-in washdown system with…
-
HEPA Filter Cell Bag Replacement
LabconcoReplacement Bag for Bag-in/Bag-out HEPA Filter to contain particulate matter during filter changing.
-
The Purifier Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in…
-
Filtermate Portable Exhausters
LabconcoCompact, corrosion-resistant housing Inherently safe design An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector® XVS Ventilation Station or Protector® Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters…
-
Protector Work Station Accessories
LabconcoFilters for Labconco protector work stations Impregnated charcoal filter packs remove dangerous vapors from the work area 5165N47 1 3/8” filters slip behind stainless steel grill to remove formaldehyde vapors quickly and completely
-
Guardian Digital Airflow Monitors
LabconcoGuardian™ Digital Airflow Monitor senses and alerts the operator to low airflow conditions. LCD displays actual airflow in fpm or m/sec. Audible/visual alarm alerts the user to sustained low velocity condition. Calibration instructions displayed on LCD. Each monitor also includes a…
-
XPert Filtered Balance Systems provide user protection by keeping powders and particulates contained during weighing procedures. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal laminar airflow to…
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
Electrical Receptacle Kit for mounting to the left or right side of a 3', 4', 5', 6', 7' or 8' Protector Premier, Xstream, XL, PVC Perchloric Acid or Stainless Steel Laboratory Hood. Includes electrical receptacle, wiring, junction box and receptacle cover plate. …
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
XPert Balance Enclosure Stations
LabconcoXPert Filtered Balance Stations are designed to protect the user during powder weighing operations. Ducting to an outside blower is required. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal…
-
Protector XL Floor-Mounted Laboratory Hoods (sometimes called Walk-In Hoods) accommodate laboratory procedures that require oversized equipment or maximum working height. Models with horizontal-sliding sashes have a loading height of 73.5” (186.7 cm), suitable for applications requiring…
-
Protector Airo Filtered Fume Hoods
LabconcoThe Protector® Airo™ Filtered Fume Hood has a compact design that avoids potential challenges of existing lab conditions while still providing space, utility and options of a traditional hood. It features all of the characteristics of Labconco Protector Hoods including the patented…
-
Protector Airo Filtered Fume Hoods
LabconcoThe Protector® Airo™ Filtered Fume Hood has a compact design that avoids potential challenges of existing lab conditions while still providing space, utility and options of a traditional hood. It features all of the characteristics of Labconco Protector Hoods including the patented…
-
The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured…
-
The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured…
-
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured…
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
Protector XVS Ventilation Station
LabconcoStandard or extra height models 2-, 3- or 4-feet wide Protector XVS Ventilation Station provides user protection by keeping powders and fumes contained during light duty, fume-generating or weighing procedures. Patented features include air foil with Clean-Sweep openings to enhance airflow and…
-
PVC T & Y Connections
LabconcoPVC fitting compatible with thermoplastic duct. End connections receive PVC pipe directly. 0516E96 - PVC "T" Connection: Duct Diameter: 10" Duct Diameter: 12" Duct Connection Diameters: 10" x 10" x 12" Height: 19" Equivalent Resistance in feet of Straight Duct: 20' …
-
Stainless steel Mounts to rear grille and provides 8.0" x 5.0" (20 x 13 cm) surface to place supplies Weight capacity: 2.2 lbs. (1 kg), shipping weight 3 lbs. (1 kg)
-
3' Nexus Horizontal Clean Bench. 26" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
The Purifier Axiom Class II, Type C1 is the first biological safety cabinet that can be used in a recirculating Type A-mode for standard microbiological work, or can be connected to an exhaust system to function in Type-B mode for handling hazardous chemical vapors or radionuclides. Because of the…
-
Seismic Support Bracket Kit
LabconcoIncludes four stainless steel seismic brackets and hardware for attachment to the stand Hardware to attach to the floor and installation are required Shipping weight 10 lbs. (4.5 kg)
-
Class II Cabinets IV Bar Kits
LabconcoIV Bar Kit for Purifier Logic Biosafety Cabinets and PuriCare Procedure Stations Kit includes: IV bar, mounting hardware, four hangers and instructions for installation
-
SpillStopper Work Surface molded of corrosion-resistant solid epoxy. Dished & contoured to conform to interior liner of Protector Pass-Through Hoods. Pre-drilled 2.5" (6.4cm) dia plumbing holes.
-
Labconco offers a variety of accessories to customize your Biosafety Cabinet, Procedure Station, Clean Bench or Filtered PCR Enclosure. Thomas No. 1197K28 Ultraviolet Lamp Applicable Products: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic & Cell Logic+ Biosafety…
-
Thermoplastic Ducts
LabconcoPVC exhaust duct is Type I, unplasticized, schedule 40, lightweight and corrosion-resistant. A Female Duct Coupling is required to join two sections.
-
Air-Tight Damper
LabconcoMounts atop the Canopy Connection to adjust exhaust airflow and closes for decontamination procedures Manually adjustable, type 304 stainless steel 10"(25.4 cm) high with 10"(25.4 cm) diameter OD inlet and outlet Shipping weight 13 lbs. (6 kg)