The Water Bath supports the following standards: ASTM D6927, D5581, D4867 Water Bath with microprocessor-based temperature control for precise temperature control throughout the range. Similar to the H-1390 Waterbath, but does not include a magnetic circulator. It includes a stainless steel…

These safe, simple and strong tubing clamps can be used on thin or heavy-wall tubing. Made of plated steel, the clamps incorporate a large aluminum knurled adjusting nut.

1196Y26: Wooden handle and horsehair bristle. Bristle length is 2-1/2"x 1"x 3/8" (64mm x 25mm x 10mm) and overall dimension is 10-1/2" (267mm). 1196Y28: Wooden handle and horsehair bristle. Bristle length is 1-1/2" x 1-1/4" diam. (38mm x 32mm), and the overall dimension is 5-1/4" (133mm).

Two prong zinc-plated, stamped steel with aluminum alloy holder is adjustable by checknut to any angle Takes objects from 3/8” to 1 3/8” diameter. Fits rods up to 1/2” diameter. Length: 6 3/8”.

Screw Compressor Clamp, Standard Open-Jaw C-Clamp without side post. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width

Designed to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish. Supplied complete with a 3/8" x 20" (10mm x 508mm) rod (H-21350) or a 1/2" x 24" (13mm x 610mm) rod (H-21360).

Made of hardened alloy tool steel. Pestle has ball-end to fit bottom of mortar cavity. Mortar: 3 x 3 x 4-1/2"H (76 x 76 x 114mm); bore: 2" dia x 3" deep (51 x 76mm). Pestle: 9-1/2" (241mm) overall length. Shipping. wt. 16 lbs. (7.3kg)

This clamp can be instantly detached from vertical surfaces such as heaters. It is constructed of aluminum and incorporates a 5/16"-18 by 1-1/4" steel thumbscrew. The clamp is 1-3/16" wide by 2-15/16" (30mm x 59mm) long and measures 1-3/8" (35mm) from muff center to the dovetail.

Used to demonstrate the thermo-expansion of metals. In use, the brass ball will pass through the ring easily when both are at the same temperature, and won't pass through at all when heated. The ball and ring are securely mounted on a rod with a wooden handle.

Similar to the H-8950, this clamp has a phosphor-bronze spring clip attached to an aluminum rod-holding block for thermometers and 2 "v" notches designed to hold the H-1602 ring and stem assembly in an ASTM Softening Point Apparatus, but can be used to suspend other items, such as pitch cubes. The…

Applications requiring 90° cones ASTM D217, D937 ASA Std. Z11.3

Designed to produce a broad, flat, fan-shaped flame. Ideally suited for use in bending glass tubing and other similar applications. Made of brass.

This highly stable jack can be adjusted to any height between 2-1/2" to 10" (64mm to 254mm). The jack will accept loads up to 10 lbs. (45.4 kg). The unit is constructed of aluminum top and bottom plates with a baked-enamel finish and plated steel cross members. Height adjustments are achieved by…

Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

Wire Gauze with ceramic center and turned edges.

Includes 800ml beaker with brass set-up fixture with cover and thermometer port with stopper, shouldered rings, ball centering guides and standard balls.

Flexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3 ft. long.

Nickel crucibles constructed from pure heavy sheet nickel. They are suitable for fusions, including those with sodium peroxide, and are highly resistant to dilute alkalies. Flat-style nickel crucible covers with depression in center for centering on crucibles. Extension on one side for handle.

Capable of handling intense temperatures, this unit is the ideal instrument for dipping, with a 16" (406mm) long handle and 3/4" (19mm) bowl.

Screw Compressor Clamp, Closed-Jaw C-Clamp with Side post for tubing insertion. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width

Smooth Pipe Stem Triangles protect glassware on hotplates and over burner flames

Wire loop handle with wire bristles. Bristle length is 1-1/2"x 3/4"x 1/8" (38mm x 19mm x 3mm) and the overall dimension is 5-1/2" (140mm).

The Tirril Burner with Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Provides separate control of both…

Universal Plasticol coated jaws Swivel jaws of stamped steel; forged steel shank Recommended for condensers and irregular shapes

Length: 2-1/2" (635mm), Width: 2-1/2" (635mm), Overall Length: 9" (228mm).

Ring and ball method softening point apparatus used for single determinations, asphalts, pitches, tars and most resins. Includes hotplate, beaker, support stand, 1 ring, wire gauze with ceramic center, thermometer clamp, 1 shouldered ring and stem with hardened steel ball. Meets ASTM D36, E28;…

Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

Sturdy Tripods featuring adjustable openings through the use of detachable rings.

Fitting on 5/8" (16mm) support rods or smaller, this stamped steel clamp is plated for corrosion resistance and has a steel thumbscrew. The clamp is 9" (229mm)long by 3" (76mm) wide with a center distance 7-1/4" (184mm) between burettes. The unit is designed for use with burettes from 6mm to 16mm…

These noiseless burners provide a clear flame of any desired height from 1/2" (12.7mm) to 12" (305mm), with separate control of both flame temperature and flame length. The burners incorporate threaded aluminum air control sleeves and precision machined, fine-pitch brass needle valves…

Wire Models and Extension Rings Wire Models Formed, bright basic wire circle is welded to shank (except 2" size). Aluminum muff. Attaches to support rods up to 3/4" (19mm) in diameter. Extension Rings Shank of Extension Ring clamps to support rods with clamp holder.…

1196Y59: Flexible stainless steel blade with straight edges and rounded ends. Blade is riveted into wooden handle. 4" long, straight-edge spatula, 3/4" x 4" (19mm x 102mm). 1196Y60: 6" long, straight-edge spatula, 7/8" x 6" (22mm x 152mm). 1196Y61: 6" long, straight-edge spatula, 1/2" x 6"…