10 Mesh Sieve

1196Y26: Wooden handle and horsehair bristle. Bristle length is 2-1/2"x 1"x 3/8" (64mm x 25mm x 10mm) and overall dimension is 10-1/2" (267mm). 1196Y28: Wooden handle and horsehair bristle. Bristle length is 1-1/2" x 1-1/4" diam. (38mm x 32mm), and the overall dimension is 5-1/4" (133mm).

…mesh  250 µm/60 mesh  500 µm/35 mesh  1 mm/18 mesh  2 mm/10 mesh  4 mm/5 mesh  8324A86 set with sieve stack 305 mm, 50 mm high to ASTM E11 includes: 600 µm/30 mesh 1.18 mm/16 mesh 2.36 mm/8 mesh 4.75 mm/4 mesh …

…to present new orientations to sieve surfaces. Down-taps help near-size particles clear the mesh openings. This vertical two-way tapping operates at 48 taps per minute. These high-capacity shakers can hold as many as twenty sieves, depending on model and sieve frame dimensions. Both models feature…

CAS#: 1344-02-1

CAS#: 1344-00-9

CAS#: 1344-00-9

Retsch test sieves guarantee unrivaled stability and consistency for your sieve analysis due to the unique manufacturing process with a onepiece stainless steel sieve frame. Paying close attention to mesh size and other specific requirements, the sieve fabric is precisely joined into the frame.…

Precision Test Sieves with  Electroformed Nickel ASTM E-161 Mesh with Clear Acrylic frame. Works with L3P and VariSifter Sonic Separators for fine particle separation Outside Diameter = 3.5" Inside Diameter = 3" Height = 1 ¼ "

…number of sieves to be used when stack height is limited. Full-Height frames allow free movement of larger particles during agitation for more efficient separation. ISO Test Sieves are fitted with black rubber O-rings. Pans collect fines at the bottom of the sieve stack. Sieve Verification…

…overloading of individual sieves or to better define a particular size range. Frame Diameter should be large enough to accommodate the entire sample volume with enough surface area to avoid overloading individual sieves. The frame diameter selected must also fit the sieve shaker being used. Half or…

…overloading of individual sieves or to better define a particular size range. Frame Diameter should be large enough to accommodate the entire sample volume with enough surface area to avoid overloading individual sieves. The frame diameter selected must also fit the sieve shaker being used. Half or…

…of sieves to be used when stack height is limited. Full-Height frames allow free movement of larger particles during agitation for more efficient separation. ISO Test Sieves are fitted with black rubber O-rings. Sieve Verification procedures should be in place to regularly check working sieves…

…of sieves to be used when stack height is limited. Full-Height frames allow free movement of larger particles during agitation for more efficient separation. ISO Test Sieves are fitted with black rubber O-rings. Sieve Verification procedures should be in place to regularly check working sieves…

…overloading of individual sieves or to better define a particular size range. Frame Diameter should be large enough to accommodate the entire sample volume with enough surface area to avoid overloading individual sieves. The frame diameter selected must also fit the sieve shaker being used. Half or…

…overloading of individual sieves or to better define a particular size range.Frame Diameter should be large enough to accommodate the entire sample volume with enough surface area to avoid overloading individual sieves. The frame diameter selected must also fit the sieve shaker being used. Most…

…number of sieves to be used when stack height is limited. Full-Height frames allow free movement of larger particles during agitation for more efficient separation. ISO Test Sieves are fitted with black rubber O-rings. Pans collect fines at the bottom of the sieve stack. Sieve Verification…

…overloading of individual sieves or to better define a particular size range. Frame Diameter should be large enough to accommodate the entire sample volume with enough surface area to avoid overloading individual sieves. The frame diameter selected must also fit the sieve shaker being used. Half or…

…overloading of individual sieves or to better define a particular size range. Frame Diameter should be large enough to accommodate the entire sample volume with enough surface area to avoid overloading individual sieves. The frame diameter selected must also fit the sieve shaker being used. Half or…

Density: ~0.49 g/mL (free fall density) General description: Our Carboxen Carbon Molecular Sieve (CMS) materials have through-pore structures. That is, the majority of the pores pass entirely through the particles. Additionally, the specially designed pores taper from macro- to meso- to…

Density: ~0.66 g/mL (free fall density) General description: Our Carbosieve ® Carbon Molecular Sieve (CMS) materials have closed-pore structures. That is, the pores do not pass through the particles. These materials tend to have very strong adsorptive strengths due to being predominately…

…10g or 4cc. For precision sieving with electroformed sieves down to 5um, some samples may be as small as 1g. Sieves for the AutoSiever are purchased separately. The 3in (76mm) diameter clear acrylic-framed sieves are available with conventional woven-wire cloth or precision electroformed mesh.…

…size TEST Loss on Ignition: <= 12 % ACS - Assay (Na 2SO 4): >= 99.0 % On U.S. No. 80 Sieve: <= 10.0 % On U.S. No. 200 Sieve: <= 90.0 % Prepared by dissolution of cadmiummetal of 99.999% spectral purity.the metal content of the solutionis…

…maximum efficiency Little to no screen wear or particle attrition Large variety of special 3” acrylic sieves with ASTM E11 wire cloth or ASTM E161 precision electroformed mesh On/off vertical mechanical pulse Each unit includes a complete Stack Assembly comprised of: 1 Column Lock,…