Hamilton offers conductivity standards whose stability of ±1% is guaranteed over a lifetime of up to 3 years. They can be used repeatedly under the condition that the bottle is not left open for more than 1 hour in total.

Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…

Analyze inorganic and organic cations using conductivity or UV detection. Separate mono or divalent cations depending on mobile phase conditions from 20 ppb to 200 ppm. Replacement Cartridge Stainless Steel Particle size: 10 µm

The Hamilton lower body assembly comes with one seal kit and is suitable for use with 100 uL SoftGrip single channel pipette models.

Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…

High Temperature Septa is made of preconditioned PTFE/silicone rubber and is 3.175 mm (0.125 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 212° C. Preconditioned PTFE/silicone rubber septa, 3.175 mm…

Hub Metal (N) Gauge 17 gauge Length 2 inch (51 mm) Point Style 3 Autoclavable Yes Sales Quantity 6 needles per pack

The Hamilton barrel assembly is suitable for use with 1701 SN syringe models.

Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…

Metal hub (nickel plated brass) needles can be used with TLL syringes and LT or TLL connectors. Needles are 304 stainless steel (sst.) Standard needle length is 2" / 51 mm Metal hub (N) needles are available in convenient six packs Custom needle lengths and point styles are available

The Hamilton washer is suitable for use with PB600-1 repeating dispenser.

High quality cables with a variety of electrical connectors to retrofit with existing pH / ORP monitors.

The Hamilton Super Syringe is a large volume Gastight syringe. These syringes are ideal for dispensing volumes from 50 mL up to 2 L. The Super Syringe is the only Hamilton syringe that is made with an acrylic barrel instead of a glass barrel.

The Hamilton 700 series 25 uL syringe is suitable for use with small removable needles. This syringe model offers SST, borosilicate glass fluid path. It can be used at a pressure rating of up to 2000 psig and temperature rating of up to 10 to 115 degree C.

A pH electrode with a true flat membrane for surface measurements such as paper, agar plates or even skin. The robust plastic shaft with a ring diaphragm guarantees quick response though enhanced contact between the sample and reference. Benefits Fast response time because of enhanced…

This tubing is cut to length but the ends are not polished and the tubing is not passivated like a typical finished needle.

The Hamilton 1000 series 5 mL gastight instrument syringe with saltline plunger style features PTFE luer lock (TLL) termination. It is suitable for use with metal (N) or kel-F needles. This syringe model offers borosilicate glass, PTFE and UHMWPE fluid path. It can be used at a pressure rating of…

Volume 50 µL Syringe Type Gastight Syringe Series 1700 Termination Diluter PTFE Luer Lock (D) Needle No Needle Available Fluid Path Borosilicate glass, PTFE, PCTFE Plunger Style Instrument Plunger Stop (X) …

The PB-600-1 Repeating Dispensers consistently dispense sample up to 50 times with the push of a button. Dispense volumes are between 0.2 µL - 50 µL Works with Microliter or Gastight syringes from 10 µL to 2.5 mL Use the repeating dispenser with cemented needles…

The Hamilton plug made from CTFE, has male 1/4 Inch - 28 threaded connection at one end. This plug is ideal to connect syringes, equipment or other devices to valves.

The Double Pore is a maintenance-free, combination pH puncture electrode made especially for use with solid and semi-solid samples. Two Single Pores make clogging of the diaphragms practically impossible, and ideally suit these electrodes for measurement in meat and cheese. Benefits …

The Hamilton 1700 series 50 uL syringe features luer lock termination.

Point styles 2 and 3 Standard 2” length Needles seat precisely to the zero graduation mark of the syringe. They are autoclavablewhen disassembled. They allow the use of different specification needles with the same barrel. The small ‘s’ next to the gauge number indicates…

Autoclavable No Needle No Needle Available Volume 250 µL Syringe Type Gastight Syringe Series 1700 Termination Diluter AccuDil® (DAD) Std. Needle Dead Volume N/A Fluid Path Borosilicate glass, PTFE …

Consistent, reproducible injections Adjustable stop ensures reproducibility Plunger guide prevents damage Easy to install

The Hamilton lens assembly is suitable for use with 300 µL pipette models.

Syringes for use with the Thermo Scientific 3000 Series II of liquid sampling systems for gas chromatography.

Metal (N) hub needles (nickel-plated brass) are compatible with PTFE Luer Lock (TLL) syringes and plastic Luer Tip (LT) or Luer Lock (TLL) connectors. These 304 stainless steel needles are packaged in convenient 6 packs and are available from 10-30 gauge. Needle Point Style 3 Blunt…

The Hamilton 7000 series 0.5 uL syringe is suitable for use with knurled hub (KH) needles. This syringe model offers SST and borosilicate glass fluid path. It can be used at a pressure rating of up to 6000 psig and temperature rating of up to 10 to 115 degree C.

The Hamilton barrel is suitable for use with 10 mL 1010C syringe models.

Reinforced plungers Cemented or removable needles Economical Similar to 800 series syringes, except these lower-cost syringes do not have adjustable plunger friction or a plunger stop. Order 8929F64 for replacement needle for removable needle syringes.