High Temperature Septa

Compare Tool

Select up to 3 products

High Temperature Septa
1 - 31 of 31
Sort
View
Show
  • High Temperature Septa

    Hamilton

    High Temperature Septa is made of preconditioned PTFE/silicone rubber and is 3.175 mm (0.125 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 212° C. Preconditioned PTFE/silicone rubber septa, 3.175 mm…

  • Septa

    Agilent Technologies

    …needles. Advanced green Septa are long-life, high temperature devices. Agilent offers users a high-performance alternative to other “green” septa. Features include reduced injection port sticking resulting in more injections per septum. Red Septa are individually packaged for…

  • Corning® GL32 Red High Temperature (180°C) PBT Screw Cap

    Corning

    The red Corning® polybutylene terephthalate (PBT) high temperature caps have a GL32 thread, can be dry heat sterilized at up to 180°C and have a Polytetrafluorethylene (PTFE) liner for efficient sealing.

  • Septa for screw caps, N 8

    MACHEREY-NAGEL

    Replacement septa for 8-425 screw caps from MACHEREY-NAGEL PTFE virginal: temperature resistant: –200 °C / +260 °C, very high analytical purity, very hard (but very thin material), no resealability Red Rubber / TEF (FEP): temperature resistant: –40 °C / +110 °C,…

  • Thermogreen® LB-2 Septa, solid discs

    MilliporeSigma

    An improved version over the original Thermogreen LB-1 septa. Extremely low bleed over a wide range of inlet temperatures (100 °C to 350 °C) Already conditioned, ready to use Easier needle penetration and high puncture tolerance (ideal for autosamplers) Rubber formulation…

  • MN Grade Silicone Septa

    SGE

    Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

  • Screw Thread Headspace Vials

    DWK Life Sciences (Kimble)

    …offers superior sealing characteristics Designed for use with thinner septa; ensures a consistently flat surface is available for the magnet Round bottom vials distribute the internal pressure created at high temperatures across the glass surface and are more easily handled by robotic arms…

  • Septa, Low Bleed High Temperature

    Hamilton

    …coring. Low Bleed High Temperature Septa for operating temperatures up to 400° C. Low Bleed High Temperature Septa are designed for the lowest bleed possible at temperatures up to 400°C. They can be used in combination with Mass Spectrometers or in applications where septa bleed interferes with…

  • Corning Media Storage Caps

    Corning

    …membrane. The polybutylene terephthalate (PBT) High Temperature Caps can be sterilized at up to 180°C and have a Teflon® liner for sealing. The Open Top Caps are polybutylene terephthalate (PBT) and require piercible silicone septa (sold separately) for sealing. The Three Hole…

  • GL Closures & Accessories

    DURAN

    …pour caps & ring Compound formulated without colour dye to avoid risk of leaching. Service temperature limit from –196°C to +200°C. Very high chemical resistance. High leak tightness through use of PTFE coated silicone seal. A matching TpCh260 pouring ring is also available,…

  • MIDI-VAP 4000 Distillation Systems

    DWK Life Sciences (Kimble)

    …Pre-programmed heating cycles for dual temperature ranges (ammonia and phenols is 165°C; cyanide is 126°C) Easy three-step setup saves time Automatic shutoff at test completion Amber light indicates heating in progress Easy to read LED display Optional temperature programming Heater Block…

  • Mininert® Valve, screw thread for use with 20/400 mm thread

    MilliporeSigma

    …be used at temperatures up to 105 °F. 0.036 in. (0.9 mm) opening accepts up to 20-gauge needle Silicone septa, red   Other Notes The maximum temperature that Mininert Valves can be used at is 105° F. When Mininert Valves are used at high temperatures, returning…

  • PYREX® Round Media Storage Bottles with GL45 PBT Plug Seal High Temperature Cap

    Corning

    …for these bottles: Polypropylene colored caps in a choice of orange, green, purple, red, and light gray for ease of sorting and identification Vented membrane cap with 0.22µm PTFE hydrophobic membrane PBT caps with silicone septa for syringe sampling or introduction of reagents

  • Marathon Septa

    Chromatography Research Supplies

    High-performance GC Septa for autosampler use Outstanding lifetime Very low bleed Maximum temperature of 350°C Septum typically achieves 400 injections without failure when used with HP-style needles and autosampler needle guide. Soft, 45 Durometer, septa are easy on…

  • Standard quality GC injection port septa

    MACHEREY-NAGEL

    septa Standard quality Septum grade: Standard septa (ST) Material: beige silicone Thickness: 4 mm Hardness: 60° shore A Septum grade: High temperature septa (HT) Material: red non-bleeding silicone Thickness: 3 mm Hardness: 60° shore A Max. Temperature:

  • 13-425 Caps with Pre-inserted Septa

    National Scientific

    Pre-assembled caps and septa are convenient and minimize contamination from handling SepCaps are single piece all polypropylene caps with an integrally molded septum Phenolic resin caps perform well at high temperatures and exposure to corrosives Phenolic and urea storage caps are suitable…

  • Premium HT quality GC injection port septa

    MACHEREY-NAGEL

    …for clean, ready-to-use septa BTO septa for the most demanding GC and GC-MS analyzes Best septum quality for extreme sophisticated analyzes low bleeding, temperature resistant, mechanically stable No loss of elasticity even at high temperatures AG3 septa with extended life …

  • Septa for crimp caps, N 11

    MACHEREY-NAGEL

    Single septa for 11 mm crimp caps from MACHEREY-NAGEL PTFE virginal: temperature resistant: –200 °C / +260 °C, very high analytical purity, very hard (but very thin material), no resealability Red Rubber / TEF (FEP): temperature resistant: –40 °C / +110 °C, medium…

  • Septa for PE Caps, N 20

    MACHEREY-NAGEL

    Single septa for all 20 mm PE push on caps (70266 + 70267) from MACHEREY-NAGEL Natural rubber / PTFE: temperature resistant: –40 °C / +120 °C, low analytical purity, high coring, fairly hard to penetrate, very good resealability Butyl / PTFE: temperature resistant: –40…

  • Septa for screw caps, N 9

    MACHEREY-NAGEL

    Replacement septa for 9 mm screw caps from MACHEREY-NAGEL PTFE virginal: temperature resistant: –200 °C / +260 °C, very high analytical purity, very hard (but very thin material), no resealability Red Rubber / TEF (FEP): temperature resistant: –40 °C / +110 °C,…

  • Septa for screw caps, N 13

    MACHEREY-NAGEL

    Single septa for 13-425 screw caps from MACHEREY-NAGEL PTFE virginal: temperature resistant: –200 °C / +260 °C, very high analytical purity, very hard (but very thin material), no resealability Red Rubber / TEF (FEP): temperature resistant: –40 °C / +110 °C, medium…

  • Septa for crimp caps, N 20

    MACHEREY-NAGEL

    Single septa for all 20 mm crimp caps from MACHEREY-NAGEL Butyl / PTFE: temperature resistant: –40 °C / +120 °C, medium analytical purity, medium coring, medium hard to penetrate, resealability medium Silicone / PTFE: temperature resistant: –60 °C / +200 °C high

  • Center hole caps, N 20

    MACHEREY-NAGEL

    …allow controlled release of excess pressure higher than 3 bars Butyl / PTFE septa for routine analyses; for more demanding analyses and for high temperatures: high purity silicone / PTFE septa Molded Butyl/PTFE septa with an only centrically laminated PTFE layer for excellent sealing on the…

  • Tear off caps, N 20

    MACHEREY-NAGEL

    …allow controlled release of excess pressure higher than 3 bars Butyl / PTFE septa for routine analyses; for more demanding analyses and for high temperatures: high purity silicone / PTFE septa Molded Butyl/PTFE septa with an only centrically laminated PTFE layer for excellent sealing on the…

  • Pressure release caps, N 20

    MACHEREY-NAGEL

    …allow controlled release of excess pressure higher than 3 bars Butyl / PTFE septa for routine analyses; for more demanding analyses and for high temperatures: high purity silicone / PTFE septa Molded Butyl/PTFE septa with an only centrically laminated PTFE layer for excellent sealing on the…

  • Chromatography Vial with Closure: 8/425

    Saint Gobain

    …exceptional resistance to chemical and temperature variations. Our 2mL 12 x 32mm standard mouth vials have a useable volume of 1.5mL and are available in 8/425 and 9/425 screw-thread polypropylene cap style or 11mm aluminum crimp cap style. Septa liners are made from silicone or butyl rubber…

  • Chromatography Vial with Closure: 11mm

    Saint Gobain

    …for exceptional resistance to chemical and temperature variations. Our 2mL 12 x 32mm standard mouth vials have a useable volume of 1.5mL and are available in 8/425 and 9/425 screw-thread polypropylene cap style or 11mm aluminum crimp cap style. Septa liners are made from silicone or butyl rubber…

  • Chromatography Vial with Closure: 9/425

    Saint Gobain

    …for exceptional resistance to chemical and temperature variations. Our 2mL 12 x 32mm standard mouth vials have a useable volume of 1.5mL and are available in 8/425 and 9/425 screw-thread polypropylene cap style or 11mm aluminum crimp cap style. Septa liners are made from silicone or butyl rubber…

  • Wide Opening Snap Top Vials

    Agilent Technologies

    …samples, sodium or heavy metals analysis. Polypropylene is translucent and able to withstand temperatures to 135°C. Can be used with crimp or snap caps. 1.5 mL Wide Opening Snap Top High Recovery Glass Vials (2714S59) Wide opening, 1.5 mL vials with 30 µL reservoir. For sample concentration…

  • Silicone Sealing Mat For 500µl 96-Well V Bottom Deep Well Plates

    Axygen®

    …AxyMats minimize evaporation in a wide range of temperatures in PCR and storage applications. These sealing mats are designed specifically for 96 round well plates. ImpermaMats are chemically resistant reusable sealing mats that provide a high degree of confidence. For storage applications involving…

  • Wide Opening Crimp Top Vials

    Agilent Technologies

    …translucent and able to withstand temperatures to 135°C. Can be used with crimp or snap caps. Wide Opening Glass/Plastic Crimp/Snap Top Vials (2715F86) Polypropylene body with a glass-flanged insert molded to the inside Sample contacts only the 100 µL high quality glass insert and the septum.…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.