Hamilton

Hamilton offers conductivity standards whose stability of ±1% is guaranteed over a lifetime of up to 3 years. They can be used repeatedly under the condition that the bottle is not left open for more than 1 hour in total.

Teflon ® PTFE tipped plungers Replaceable barrels, plungers and tips mL sizes For use with liquids or gases. Features a precision-machined Teflon plunger tip which, when wetted, forms an interference fit with the inner diameter of the glass barrel, achieving the seal required for accurate...

Hamilton Company offers a calibration service for precision syringes and Digital Syringes. A Certificate of Calibration is provided with the calibrated syringe and the procedure is performed with an unbroken chain of calibrations traceable to N.I.S.T. Calibrated precision syringes are available only...

1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger...

1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1μL up to 500μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger tip...

These tips are used with Hamilton 1000 μL SoftGrip and SofTouch pipettes. They are provided in different packaging types, surface textures, and filter options.

The 700 series syringe is the original hand-fitted Hamilton syringe. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance less than three thousandths of a millimeter, resulting in unsurpassed syringe life. This series of syringes is ideal for dispensing volumes from...

Hamilton ORP buffers provide accuracy of ±5 mV with stability up to 2 years after date of manufacture. The 500mL bottle design uses Hamilton's unique calibration compartment which helps avoid cross contamination and only uses approximately 15 ml of solution.

Point styles 2 and 3 Standard 2” length Needles seat precisely to the zero graduation mark of the syringe. They are autoclavablewhen disassembled. They allow the use of different specification needles with the same barrel. The small ‘s’ next to the gauge number indicates a smaller...

The Kel-F hub is made from CTFE plastic. Needles are available from 31 to 10 gauge. This hub is recommended when connecting to a rigid male Luer like a Luer Tip (LT) syringe because the plastic is more pliable and creates the best seal. All needles are sold in six-packs and the standard needles are...

The Hamilton 700 series 250 uL syringe is suitable for use with cemented (N) needles. This syringe model offers SST and borosilicate glass fluid path. It can be used at a pressure rating of up to 1000 psig and temperature rating of up to 10 to 50 degree C.

The Hamilton 1700 series 50 uL syringe is compatible with small removable needles. This syringe model offers SST, borosilicate glass and PTFE fluid path. It can be used at a pressure rating of up to 1000 psig and temperature rating of up to 10 to 115 degree C.

The Hamilton glass barrel is suitable for use with gastight 1800 series syringe models.

1700 series, gastight syringes with cemented needles. Length: 1.71 23s-26s gauge AS Point Style

The Hamilton plunger assembly is suitable for use with 250 uL 1725 N, RN, LT/LTN, TLL (without slots) syringe models.

Volume 500 µL Syringe Type Microliter Syringe Series 700 Termination Cemented Needle (N) Needle Cemented Needle Gauge 22 gauge Point Style 5 Needle Length 2 inch (51 mm) Needle Inner Diameter 0.0161 inches (0.41 mm) Needle Outer Diameter 0.0283 inches (0.72 mm) Std. Needle Dead Volume 6.81...

Small Hub Removable (RN) needles can be used with Removable Needle (RN) syringes that are 100 µL and smaller. Standard needle length is 2" / 51 mm. Removable (RN) needles are available in convenient six packs. Custom lengths and point styles are available.

Metal hub (nickel plated brass) needles can be used with TLL syringes and LT or TLL connectors. The needles are 304 stainless steel (sst.). Standard needle length is 2" / 51 mm. Metal hub (N) needles are available in convenient six packs. Custom needle lengths and point styles are available.

The Hamilton 700 series 10 uL syringe is suitable for use with cemented needles. This syringe model offers SST and borosilicate glass fluid path. It can be used at a pressure rating of up to 2000 psig and temperature rating of up to 10 to 50 degree C. This syringe has a needle inner diameter of...

Hamilton introduces a new headspace syringe featuring a unique Glue-Free (GF) needle attachment in combination with the well-known High Dynamic (HD) plunger designed specifically for PAL COMBI-xt Headspace Autosamplers. Hamilton's solution: Glue-Free needle attachment is chemically inert,...

The Hamilton luer lock adapter with male luer connections at both the ends, is suitable for use with many kinds of male and female luer and threaded connections. It is made from CTFE material which is durable and chemical resistant.

Polymeric cation exchange packing for separation of glyphosate and its metabolite in drinking water. Faster analysis when compared to competitor’s columns Detection levels of less than 10 ppb when using the post column, OPA derivatization technique Applicable to other separations, such as...

The Hamilton 1-1 HVX valve can be threaded with fittings, adapters, male and female luers, FEP tubing assemblies and adapters. With PTFE/CTFE fluid path, this 94.1 uL valve is made of aluminum housing which ensures high strength and durability. It can be operated manually. This valve operates at a...

This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. The 1700 series syringes are the GASTIGHT version of the original 700 series syringes. A variety of different terminations and needle options are available in this series.