The ideal solution for biohazard or non-hazardous waste. REDUCE Cost, Weight, Transport, CO2 Emissions, Storage Space. Space efficient, light weight fold-flat design Built-in lid and handles Temporary & permanent seals Stackable post use. UN 3291 Approved Printed user…

Scoops. Flat Bottom. High-density Polyethylene. 25 mL liquid capacity. Heavy duty scoops with many industrial and laboratory applications. Suitable for liquids and powders.

Liquid Sampler 3' 500 mL ( 1212X48 ) Product Dimensions (l x w x h) : 0x2.937x45.75in 3' handle sampler with 500 mL bottle. Manufactured from chemically resistant high density polyethylene this sampling device is perfect for corrosive environments and for hard to reach places.…

Tissue Embed Cassettes. Mega type for medium-big dimensions samples. Material: POM Poliossimetilene Poliacetale. They are available in five colors and delivered in cases of 100 pieces: White (000W), Blue (000B), Yellow (000Y), Green (000G) & Pink (000P). Tissue Embedding Cassettes,…

Syringe-type for easy, one-handed control of filling and delivery from conventional pipets Knurled thumbwheel is rotated to raise or lower plunger by rack-and-pinion drive For rapid delivery, plunger can be pressed directly Tapered socket grips mouth end of pipet Quick release lever on side of…

Dispensing Trays. Heavy trays fabricated with 1/4" thick high density polyethylene. All welded construction. Dispensing trays are supplied with polypropylene dispensing valve located as close to the tray bottom as possible, but can be in other locations upon request. All trays below can be…

Printed cylinders, made of polypropylene. Cylinders feature permanently easy to read blue screened graduations that resist fading and scratching after repeated autoclaving. Meets stringent international quality criteria according to ISO 6706 standards. Tolerances according to DIN 12 680 TT, Class…

Useful for the transport and benchtop storage of vials, bottles, containers, instruments and various laboratory accessories. Made of food grade high impact polystyrene. Very durable.

Plastic snap cap vials are molded of rigid-wall FDA compliant styrene with tight fitting polyethylene snap-on caps. Plastic snap cap container vials are excellent for storing dry materials, powders, tablets, etc. There are approximately 16 drams per fluid ounce. 7 dram size may be used with…

Contamination-free stirring-price justifies single use Four convenient sizes Disposable price Resistant to virtually all chemical attacks High-quality stirring bars molded with strong magnets permanently coated with white PTFE. Available in the four most popular sizes to…

Containers are HDPE except 8, 16, 32 oz natural and white, and 83 oz natural, which are PPCO, a copolymer of Polypropylene and High Density Polyethylene. PPCO offers a product with a higher temperature range while maintaining good impact strength. Recycling code is "5" for PP and the HDPE…

Leakproof, rigid and translucent narrow mouth Polypropylene lab bottles can be autoclaved, have excellent chemical resistance and are ideal for storage and sampling of liquids or solids. Bulk packed bottles come with closures included but not attached.

Made from food grade resin, the high-density Polyethylene closure with tag holes includes an o-ring for added security. The spigot with gasket is leakproof and screws directly into a welded wall insert. Very resistant to many common chemicals, these carboys provide great value for the economical…

Bench top shields are designed with the safety of the user in mind. The top is angled and wide to protect the face and body. Like our popular Splash Shield, the user can easily place his / her arms around the shields to perform any number of procedures while still protecting the operator. …

These high quality natural wash bottles are supplied in flexible natural polyethylene and are fitted with a white leak proof, wide neck polypropylene spout closure. The wide neck offers easy spill-free filling, and the acute angled, precision molded dispensing spout, ensures a consistent, downward…

Product Dimensions (l x w x h) : 0x5.81x9.875in 1 gallon capacity, high density polyethylene utility jar with metal closure. Hundreds of uses around the lab. Wide mouth, natural color. Withstands temperatures to 110ºC.

For general laboratory use these Polymethylpentene beakers will withstand temperatures up to 180°C. Graduations molded in milliliters with a special no-drip pouring spout. Chemically resistant to most acids, bases and many common solvents. Autoclavable.

Clamp One Position (1212X07) Product Dimensions (l x w x h) : 1.5x0.75x1in One Position Clamp. Polypropylene. This unique open/close, single position design allows for positive on/off flow control. The clamp design features easy tube insertion for both manual and automatic operations.…

General purpose  containers with push-in friction fit hinged lids.  Lightweight, wall thickness approximately 1MM. Withstands  temperatures up to 80° C.

Stir Bar Cross Head 58X15 mm Product Dimensions (l x w x h) : 0x2.423x0.616in Cross Head Magnetic Stir Bar. Polytetrafluoroethylene. 58 mm length. Greater mixing action at bottom, side, and top of container, even at low stirring speeds. No splashing, less noise. For test tubes, round…

High quality and high speed Kartell Automatic Pipette/Burette Washing Set. Solves the problem of washing pipettes up to 600mm long and Mohr burettes quickly and safely. Indispensable in the laboratory where radioactive, caustic and toxic materials are in use. The PE rinser fills via the spray…

Permanent magnet sealed in shell with triangular cross-section

Format with graduations marked in blue print. 50mL  increments with 500mL graduation lines printed around  circumference. Less than 24" in height with stable 8"  diameter octagonal base. The base unscrews from cylinder for ease of cleaning and storage. Use for…

Product Dimensions (l x w x h) : 7.125x5.125x11.125in Sold in a case of two 5 Liter bottles With a cleaning performance second to none, new Lipsol marks the arrival of the next generation of laboratory detergent.  Lipsol is a non-corrosive, fully biodegradable liquid…

Product Dimensions (l x w x h) : 0x2.102x8in Comfortable - simple to use Precise pipetting - use with glass or plastic volumetric  and graduated pipettes from 0.1 to 100mL Blow out feature Uses protective/replaceable syringe filter Easy to take apart and clean…

For protection against Beta radiation Constructed from 3/8" acrylic Designed to accommodate a one gallon jug Supplied with non-skid feet An opening in the lid will accept a wide-mouth funnel for easy disposal of liquid radioactive material. Excess residue can be rinsed from the funnel…

Developing flat bottom dishes. Dishes come in different sizes for various size prints. Made of white high-density polyethylene (HDPE) All dishes have pouring lips, except for 1217C45, 1217C46 and 1217C47 Easily cleaned Standard photographic paper

Polyethylene bottles and spouts come with sealer caps Spout openings standard .030 inches, can be enlarged by cutting with scissors Sealer snaps on easily after using and gives tight seal 15 mL bottles are furnished with size 15 caps; 30 and 60 ml bottles with size 18 caps; 120, 180 and 240 ml…

These wide mouth lab bottles are available in translucent or amber rigid high density polyethylene. The amber lab bottles can be autoclaved. Bottles are ideal for storage and handling of liquids or solids. Translucent bottles are made with FDA approved resin for non-contaminating storage of…

Designed for laboratory carboys or other large containers with spigots Carboy spill trays are fabricated with 1/4" thick chemically resistant HDPE. All welded construction featuring a 1/2” skid resistant top shelf. Provides a safer way to dispense chemicals or other liquids in the…

Product Dimensions (l x w x h) : 3.75x2x0in Buchner funnels. Molded of polypropylene; these funnels are unbreakable and resistant to corrosion and heat, and easily separated for cleaning. Can be used without risk with Erlenmeyer flasks. Optional disks for funnels sold separately. Molded of…

Polypropylene Molded graduations - in liters Low form for added stability Autoclavable; use up to 135°C Autoclavable, highly translucent especially when filled with liquids. Permanent molded in graduations. Resistant. No drip spout. Thumb grip on handle.