Manufactured from borosilicate glass which provides the best chemical resistance Graduations and marking patch assists in measuring volume and identifying content Special pour lip facilitates pouring Packaged in partitioned carton to help prevent scratch marks on bottles

With attached screw cap 30-1000 mL (1 oz-32 oz) sizes Polypropylene caps with choice of liners Amber glass for light sensitive samples Narrow mouth bottles are Type III soda-lime glass and conform to USP Type III requirements. These bottles are ideal for solvent, chemical and…

Screw cap made of radiation grade polypropylene Variety of colors Packaged in case of 100 or 1000

Clear plastic hinged case for convenient storage and transportation of sample vials Polycoated partitions protect vials from abrasion and breakage Alphanumeric index card provides for easy vial identification Extra partitions and index cards can be purchased separately

Metallic Luer Lock nozzles Volume ranging 0.1 to 50 mL Sterilization up to 160°C / 320 °F

Available in Natural red rubber, gray butyl and Teflon® coated butyl 7, 13 and 20 mm sizes Stoppers come in a variety of elastomer formulations. Natural rubber is a general-purpose elastomer used primarily for aqueous liquid fill products in the 4.0-7.5 pH range. Its resealability is…

Wide mouth bottles Ideal for solids and viscous liquids Bottles are designed for easy cleaning in dishwasher or with a brush Specially designed rim prevents fluids from running down the outside of the bottle Wheaton 400 borosilicate glass Standard Taper stopper size indicated in listings.

Plastisol coats exterior of bottle retaining contents if bottle is accidentally broken Non-slip coating allows for greater ease and stability when handling wet or dry Made from amber soda-lime glass that conforms to USP Type III requirements Amber bottles protect light-sensitive samples…

Marking spot Borosilicate glass 300 mL capacity BOD Bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by…

Tested and compared to other containers, Redi-Pak plastic bottles offer many superior advantages Leakproof, double-seal closure Special no-drip pour lip Standard thread finishes The closure design incorporates a unique double-seal which has been leak-tested under stringent…

Leakproof, double-seal closure Special no-drip pour lip Standard thread finishes The closure design incorporates a unique double-seal which has been leak-tested under stringent vacuum and pressure conditions and proven to remain tight over extended periods of time. Comparative tests performed…

50 Position rack 12.5 mm Open ID sized vials Racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the vials are in place. Each well has an opening in the bottom to facilitate drainage.…

Manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements.

Autoclavable Chemical resistant Gas impermeable Acceptable sterilization methods: autoclave, dry heat, chemical.

Leak-resistant design with double-seal closure No-drip pour lip for safe and clean pouring Cap attached

Tefon®-faced (14B) rubber liners Autoclavable caps are designed to ensure the ultimate in product safety. The liners are made of a nontoxic white styrene-butadiene rubber and are faced with Teflon® which offers excellent chemical resistance. They are available in convenient lab pack quantities…

Number of bottles per rack: 12 Bottle capacity: 300mL Corrosion-resistant Rack is manufactured from rugged PVC coated wire Racks interlock for connecting stacked racks (allows safe transport in stacked position)

Leakproof, double-seal closure Special no-drip pour lip Standard thread finishes The closure design incorporates a unique double-seal which has been leak-tested under stringent vacuum and pressure conditions and proven to remain tight over extended periods of time. Comparative tests…

Clear bottles are made from borosilicate glass Amber bottles are square, round or jug handled Amber glass bottles are available safety coated Square polyethylene bottles are available in 250 - 2500 mL size

With attached screw caps Ideal for field or general laboratory use

With attached screw cap 30-1000 mL (1 oz-32 oz) sizes Polypropylene caps with choice of liners Clear glass for light sensitive sample Narrow mouth bottles are Type III soda-lime glass and conform to USP Type III requirements. These bottles are ideal for solvent, chemical and sample storage…

Cleanest, most precise pharmaceutical grade rubber stoppers for research and parenteral drug applications Readily punctured with syringe needle 1229H85-K77, 1223Z64-65, 1780K28-31: straight plug style 1229K78, 1780K33-35: 2 leg lypohilization style 1780J10-J14: sleeve style

BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. These 300 mL capacity bottles are…

Leakproof, double-seal closure Special no-drip pour lip Standard thread finishes HDPE The closure design incorporates a unique double-seal which has been leak-tested under stringent vacuum and pressure conditions and proven to remain tight over extended periods of time. Comparative tests…

Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas Helps meet EPA requirements for water and waste water sampling Available in lengths up to 18’ (5.5m) Each sampler consists of an inert polypropylene head with stainless steel fittings and an…

BOD Bottle Racks are constructed of coated wire. 1215X63 is holds up to twenty 60 mL BOD Bottles and 1220C96 hold up to twelve 300 mL BOD Bottles. Rubber Leash For BOD Stopper (1234R64) ensures that the stoppers do not become lost when collecting samples in from the field. The 10 mm diameter…

With attached screw caps Ideal for field or general laboratory use

White, low density polyethylene spray bottle comes in sizes ranging from  15 mL to 60 mL Oval squeeze design With atomizer tip and dip tube Polypropylene screw cap

Polypropylene Natural (Autoclavable) Leak resistant design with double-seal closure No-drip pour lip for safe and cleaning pouring Cap attached

Tip made of LDPE (Low Density Polyethylene) Extended controlled dropper tip dispenses one drop at a time Average drop size is 44uL

Leak-resistant design with double-seal closure No-drip pour lip for safe and clean pouring Cap attached

These autoclavable caps are designed to ensure the ultimate in product safety. The liners are white styrene-butadiene faced with Teflon.