Lab Stoppers
This category includes a variety of stoppers, each tailored for specific needs. Rubber stoppers, known for their flexibility and tight seal, are perfect for general use in flasks and test tubes.
Convertible stoppers offer versatility, easily adapting to different lab apparatuses. Color-coded stoppers enhance lab organization, allowing for quick sample identification and reducing the risk of cross-contamination.
Lab stopper options include plug-type rubber sleeve stoppers, which provide a secure fit for more complex laboratory setups, ensuring airtight conditions for sensitive experiments.
Lab stoppers, ranging from simple rubber variants to specialized butyl stoppers and glass stoppers, are indispensable for ensuring the safety and accuracy of laboratory work.
Their ability to effectively seal and protect makes them an essential in any lab environment.
-
Twistit Convertible Stoppers
PlasticoidUnique seal system allows use as solid or one-, two- or three-hold closures Simplifies stock room inventory Molded of soft, resilient, white natural rubber Seals vacuum-tested to 760 mm Hg Autoclavable, with good shelf life. Sizes #3 & #4 have two holes; #5 - #10 have the (3)…
-
Stopper, Flask Length, Flathead
ChemglassFlathead design allows stopper to be inverted and placed on end thereby preventing contamination of the ground surface.
-
Silicone Stoppers with Holes
DWK Life Sciences (Kimble)General purpose single-hole silicone rubber stoppers. Steam autoclavable Opaque yellowish-white color Silicone stoppers with holes are manufactured from pure silicone rubber
-
Rigid PTFE sleeve Joint
MilliporeSigmaRobust, PTFE sleeve with substantial grip-ring for repeated use and ease of handling. Transverse trapezoidal sealing rings provide grease-free, high-vacuum performance at temperatures up to 280C. Synonyms: ptfe sleeves
-
Suba-Seal® silicone rubber septa
MilliporeSigma•Translucent silicone rubber septa •Contains no pigments, waxes, or molding agents •Good for high heat applications (200C continuous or 400C intermittent) •Autoclavable for sterile uses •Excellent resistance to deterioration due to sunlight and ozoneTurnover flange grips outside of container…
-
SYNTHWARE Septum Stoppers, Sleeve Type
Kemtech AmericaSleeve Type Septum Stopper made from natural white rubber.
-
The hollow stopper is light in weight, yet very strong to reduce chipping and breakage, thus minimizing replacement costs. A barrel-shaped head means it is easy to clean and even easier to rotate in or out. Grooves in the sides help prevent slippage. The flat top allows the stopper to stand on its…
-
Snap-On Stoppers
DWK Life Sciences (Wheaton)Natural red rubber or gray chlorobutyl/45 material 7 x 13 or 13 x 20 mm sizes
-
-
Snorkel Stopper Taper 27
Glas-ColWith a patented Glas-Col Snorkel Stopper, you'll never again have to take time to open the stopcock and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it…
-
SYNTHWARE Flask-Length PTFE Stoppers
Kemtech AmericaPTFE Stopper, Flask Length, Synthware, Various Joint Sizes Available.
-
Stopper Top Pk144
DWK Life Sciences (Kimble)Top Stoppers for Incubation Flasks. Rubber stoppers for flask top and sidearm provide a secure double seal Top stopper has off-center hole for insertion of center well Fits both 10 and 25 mL flasks
-
One-Hole Rubber Stoppers
PlasticoidSize No. 000, 00 and 0 have hole 3 mm diameter; sizes No. 1 and 2 have hole 4 mm in diameter; all other sizes have hole 5 mm in diameter.
-
Assorted 1 Hole Rubber Stoppers
GSC International, Inc.1 pound package of assorted 1 hole rubber stoppers. Sizes and quantities are as follows: Size 00: 4 each Size 0: 4 each Size 1: 4 each Size 2: 4 each Size 3: 4 each Size 4: 3 each Size 5: 3 each Size 6: 3 each Size 7: 3 each
-
No 8 Stopper, Silicone
DWK Life Sciences (Wheaton)Silcone rubber stopper Makes the connection to a standard 1 liter Erlenmeyer-style filtration flask Size: No. 8 Case of 6
-
SYNTHWARE PTFE Stoppers for Extraction
Kemtech AmericaPTFE Stopper, Standard Taper, Extraction, Synthware, Various Joint Sizes Available, Stopper has a Nylon extraction nut permitting easy removal of the stopper from the glass outer joint.
-
Septum Stoppers, Sleeve Type
ChemglassSleeve type stoppers with a hollow plugs and sleeve extensions that folds down over the neck of a vessel, tubing, etc. The diaphragm can be punctured with a syringe needle, re-sealing after the needle is withdrawn. Available in either RED or WHITE rubber.
-
These PYREX® gas washing Standard Taper stoppers are replacements for the 500mL gas washing bottles (No. 31760-500EC). Sidearm tubulations are 8mm O.D. A 40/50 Standard Taper stopper is used to seal the top to the base. This Standard Taper stopper incorporates a tube with a 20mm diameter extra…
-
Key-Head Color-Coded Medium Length PTFE Stoppers
DWK Life Sciences (Kimble)Stoppers are used with laboratory glassware such as flasks and separatory funnels. PTFE has excellent chemical resistance and resists freezing in ground glass joints Remove the colored polyethylene handle from the PTFE stopper before cleaning or exposing to temperatures above 80 °C …
-
PTFE stopper adapter is similar to CG-3002-L but with the addition of one female NPT port in the center. The optional PTFE compression fittings provide a convenient way to insert probes or connect PFA tubing or FEP tubing to reactors or flasks. PTFE stopper has an extraction nut permitting easy…
-
Precision Seal® rubber septa white
MilliporeSigmaThe recommended choice for use with organic chemicals and solvents, pressure applications, and cannulation techniques:Precision Seal septa are designed specifically for the rigorous requirements of chemical applications. •Precision fit: Precision Seal septa have a longer, tapered plug that seats…
-
Borosil® Amber Solid Penny Head Glass Stoppers are with Interchangeable Ground Joint and can be used with Volumetric Flask of 5645, 5647 families or for other suitable joints. Manufactured with low extractable quality grade USP Type I, 3.3 Borosilicate Glass confirming to ASTM E438 Class A…
-
No. 8 Perforated Stopper
MilliporeSigmaDesigned for use with 1L and 4L vacuum filtering flasks and 47mm vacuum filter holder assemblies 100% Silicone Material Perforated, 1-hole accepts filter holder assemblies and tubing Pack of 5
-
Neoprene Stoppers
United Scientific SuppliesNeoprene stoppers can be used in areas where rubber would be attacked by reagents or solvents. Synthetic neoprene stoppers have good resiliency and shelf-life. They withstand petroleum products and oils as well as most inorganic acids and bases. Stopper are green for easy identification. Sold by…
-
3-Leg Lyophilization Stoppers
DWK Life Sciences (Wheaton)1233Z70: 3-leg design provides stability during lyophilization and resists cocking. Constructed of Gray Chlorobutyl/50 material and fit bottles with mouth 13 mm ID x 20 mm OD. 1224A82: 3-leg lyophilization stopper is made from gray chlorobutyl/55 and is used with Wheaton screw neck diagnostic…
-
XX2014718
MilliporeSigmaDesigned for use with Millipore stainless steel vacuum filter holders Stopper Size: No. 8 Hole I.D.: 9.5mm (3/8 in.) Silicone rubber construction
-
Stopper 0.75 - 1ml Polyet 00
DWK Life Sciences (Kimble)Plug-style needle closures White Polyethylene Designed for shell vials Economical
-
-
Free from volatiles or extractable substances which may impair cell growth; for use at temperatures from -80 to 450°F Can be steam sterilized at 15 lbs. pressure, making them suitable for culture tubes containing pathogenic materials Length: 25 mm Not recommended for use with…
-
Precision Seal® rubber septa red
MilliporeSigmaThe recommended choice for use with organic chemicals and solvents, pressure applications, and cannulation techniques:Precision Seal septa are designed specifically for the rigorous requirements of chemical applications. •Precision fit: Precision Seal septa have a longer, tapered plug that seats…
-
Precision Seal® rubber septa red
MilliporeSigmaThe recommended choice for use with organic chemicals and solvents, pressure applications, and cannulation techniques:Precision Seal septa are designed specifically for the rigorous requirements of chemical applications. •Precision fit: Precision Seal septa have a longer, tapered plug that seats…
-
Rubber STOPPER,#0
Bellco GlassA laboratory rubber stopper is mainly used in chemical laboratory in combination with flasks and test tub. Specifications: Material: Rubber Flask Closure