Ideal for use with gel filtration, ion exchange, affinity and adsorption media Economical Easy to use Universal fittings and tubing connections Ideal for use with gel filtration, ion exchange, affinity and adsorption media. Polypropylene reservoirs and column outlets are permanently…

Similar to 3432N40 series, but with PTFE pestle and an unground glass tube Ideal for soft tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 0.5, 1, 3, 5, 8,…

Made of autoclavable CTFE/Stainless Steel Optional cordless drive unit available, see Thomas number 3411E25.

Re-suspend protein and DNA pellets or grind soft tissues in micro centrifuge tubes Pestles can be hand operated or motor driven Autoclavable types available Ideal for cell and tissue culture preparation Choose the best pellet pestle for your applications RNase-, DNase- and Pyrogen-free …

With Standard Taper Joints Complete with Allihn condenser with joint at bottom, Soxhlet extraction tube with top and bottom joint and flat-bottom flask Available in small, medium and large capacities Small Extractor with 125 mL flask (4406E10, E16, E22) Extraction chamber 30 mm i.d. x 95…

This closed system tissue homogenizer (tube with pestle) is non-sterile and packaged in a bulk pack configuration.

Solvent bottle adapter Economy three-hole cap Inlet/sparge filter Safety system 3 combines a three-hole cap, solvent bottle adapter and a combination inlet/sparge filter to eliminate the safety hazards of aluminum foil wrapped solvent containers. Solvent bottle adapter converts GL-45…

This column features all borosilicate glass construction with an 85 mL reservoir The glass wool plug and PTFE tubing at the bottom of the column are held securely in place by a BEVEL-SEAL™ connection, facilitating easy cleaning and assembly PTFE BEVEL-SEAL™ stopcock connector is…

Used for dispensing a fixed volume of liquid into vessels with small openings. 675300 polyacetal Standard Taper clamp (one included) secures flask and head All-glass apparatus manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type…

A Standard Taper clamp made of corrosion-free stainless spring wire.

Gravity chromatography column manufactured from medium wall tubing with PTFE stopcock and in-line reservoir for containing liquid buffer Standard Taper joint size 24/40 These gravity columns may be used alone or in combination with 420575-2440 flow control adapter A coarse porosity glass…

Useful for refluxing and distillation assemblies. The narrow annular space of the West design provides high cooling efficiency due to the increased flow rate of the cooling medium Medium length Standard Taper joints Condensate is not restricted with this design Manufactured from…

Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

Bent angle of 105°, with Standard Taper joints on inlet and outlet ends and inner drip-tip which bypasses vacuum take-off tubulation Has drip-tip at exit end Side-arm accepts 5/16” i.d. flexible tubing Made from Kimax® Brand KG-33 borosilicate glass, which features a low coefficient of…

This apparatus combines two analytical techniques, Soxhlet extraction and Dean-Stark azeotropic distillation, into a single process for the removal of water, chlorinated dibenzo-p-dioxins (CCDs) and chlorinated dibenzofurans (CDFs) from wet particulate samples. Determination of water and…

Standard Taper outer joint at the top Standard Taper inner drip joint at the bottom Hose connections accept 3/8” ID flexible tubing Ref: ASTM Method D322 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

For all Kontes pellet pestle mixers Compact, hand-held unit Motor driven Comes complete with two “AA” batteries. Dimensions: 3” Dia. x 6” L.

Without stopcock 5579M10 Buret is graduated from 0.5 to 50 mL in 0.1 mL divisions, tolerance ±0.10 mL.

The Kuderna-Danish apparatus was developed in the laboratories of Julius Hyman and Company for the concentration of trace amounts of sample dissolved in organic solvents. The column is designed to speed evaporation with reduced hold-up. It is very useful in sample preparation before analysis with…

Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

Ammonia/Phenols and Cyanide Models Available Corrosion resistant PTFE-coated glass 30" x 14.25" footprint Overtemp protection switch Automatic shutoff MIDI-VAP 4000 Systems feature a pre-programmed digital controller with automated shut-off when reaction time is completed. They…

Excellent for storage of hygroscopic chemicals, and to prevent adsorption of moisture when using crucibles, weighing bottles, and watch glasses. Plastic screw-thread top cap for easy cover removal Recessed base for containment of desiccant Includes metal plate Manufactured from…

A convenient stainless steel universal joint with 5/16 inch OD shaft and polyacetal adapter connects stirrer shafts to stirrer motors. Flexible design allows connection even if alignment is not precise. Stirrer Adapter, Flex-Shaft. For 8-10 mm Shafts

For connecting inert gas and vacuum sources Stopcock has metering groove cut into the plug to provide fine control of vacuum and inert gases. Distance between stopcocks is 65 mm for 8651N01 and 100 mm for 8651N03. Include patented pressure/vacuum retainers. Dimensions (mm): 8651N01: 230 L x…

Tightly wound coil provides enough surface area to condense high vapor pressure solvents like hexane. With an internal, coil-type cold finger Standard Taper outer joint at the top, Standard Taper inner drip joint at the bottom 283000 does not have a drip joint Two hose connectors…

Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

Has separate reflux overflow tube Graduated in 1/10 ml divisions from 0 to 1 mL; in 1/5 mL divisions from 1 to 10 mL With 24/40 joints; meets ASTM Standard E 123 Specialized for determination of water in emulsified asphalts With Standard Taper24/40 joints and reflux overflow…

Produces a relatively coarse homogenate For cellular work where the nucleus remains intact after homogenization All glass construction * Stated clearances for the tubes and pestles are “total” not “annular”.

This three-position linear solvent recovery system is intended for use with Kuderna Danish evaporative concentrators. Heating mantle, controller, splash guard, clamps and supports provided with the complete system Power: 15 amps – 120 volts Refrigerating circulator recommended…

The Kuderna-Danish apparatus was developed in the laboratories of Julius Hyman and Company for the concentration of trace amounts of sample dissolved in organic solvents. The column is designed to speed evaporation with reduced hold-up. It is very useful in sample preparation before analysis with…

For use with hybridization incubators with rotors Reduced probe volumes Perform Northern, Southern or Western blots Include caps with silicone O-rings Tubes provide a cleaner and safer alternative to hybridizing in bags. Use only approximately 5 mL of probe per blot. Multiple…