Soxhlet

Compare Tool

Select up to 3 products

Soxhlet
1 - 32 of 56
Sort
View
Show
  • Modified Soxhlet Extraction Apparatus

    Wilmad LabGlass

    These large capacity Soxhlet extraction apparatus with modified design feature a wide mouth opening that provides easier charging and sample removal and a large area at the filter plate for rapid drainage of the solvent. Bulky solids may be placed directly on a fiberglass mat (not supplied) and fine…

  • Whatman Glass Soxhlet Extraction Thimbles

    GE Healthcare

    …1–1.5 mm603G borosilicate glass fiber thimble with inorganic binder Standard glass Soxhlet thimble applications Analysis of hot and acidic gases, including emission control and smoke stack gas monitoring Soxhlet extraction Analysis of pesticide residues Determination of oil/fat content of…

  • SER 148 Series Solvent Extractors

    VELP

    …or a group of elements from solid and semi-solid samples according to the Randall technique. Beats Ordinary Soxhlet Extractor Up to 5 times faster than traditional Soxhlet (hot solvent vs. cold solvent) Low solvent consumption (high solvent recovery, up to 75%) Limited cost per…

  • Soxhlet Extraction Apparatus

    Wilmad LabGlass

    Used for the continuous extraction of solids with a suitable solvent. Units are supplied complete with flat bottom boiling flask, Soxhlet extractor and Allihn condenser. The extractor capacity shown is the solvent volume held in the extractor to the top of the siphon tube. The siphon tube is…

  • Whatman High Performance Cellulose Extraction Thimbles

    GE Healthcare

    …cotton linter for high-performance use in automated Soxhlet extractor systems. Used in air and waste gas analysis. OtherWhatman extraction thimbles are available from GE Healthcare’s Life Sciences business. Cellulose thimble options for Soxhlet extractor systems Standard extraction thimbles have…

  • Whatman High-Purity Glass Soxhlet Extraction Thimbles

    GE Healthcare

    …are designed to fit most Soxhlet extraction units. They are well-suited to pollution monitoring when analysis of hot and acidic gases is required. Resistant to temperatures up to 500°C Binder-free, no chemical additives Designed to fit most commercially available Soxhlet extractors. Effective…

  • PYREX Soxhlet Extractors

    Corning

    Includes an efficient Friedrichs condenser An efficient extraction apparatus for general purpose use Consists of an extractor, a special Friedrichs condenser and a flask, all equipped with Standard Taper joints Condenser tubulation o.d. is 10 mm for 3/8 inch i.d. tubing

  • High-Purity Glass Extraction Thimbles

    GE Healthcare

    …and wall thicknesses to suit your application Designed to fit most commercially available Soxhlet extractors No binders are added Applications Smoke stack gas monitoring Soxhlet extraction Analyzing pesticide residues Determining oil/fat content of foods (e.g. French…

  • Soxhlet Extraction Body

    DWK Life Sciences (Kimble)

    Extractor body only, used as component part of 585050 Soxhlet extraction assemblies. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Rotavapor® R-300 Rotary Evaporators

    Buchi

    Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

  • PYREX® Extractors With Standard Taper Joints

    Corning

    …Joints (4406K10, K16, K34, K40, K58, K64, K82 and K88) The following products are similar to those listed above. However, this apparatus consists of a Soxhlet extractor, an Allihn condenser and a flask, all equipped with Standard Taper joints. The tubulation O.D. on the condenser is 10mm.

  • ROT-X-TRACT-S Rotary Solid-Liquid Soxhlet Extractors

    Organomation

    …rotary Soxhlet extractor can accommodate up to 8 or 10 Soxhlet extractors. The bath cover disk holes can accommodate round sample flasks from 125 mL to 1 L. A wide range of sample sizes and quantities make this instrument ideal for Soxhlet extraction of samples in any lab. Soxhlet extraction…

  • EMEA Heating Mantles For Soxhlet Extraction

    Electrothermal (Bibby Scientific US)

    Incorporates a stirring module that allows the solution to be stirred and heated at the same time Three positions for 100, 250, 500 or 1,000 mL flasks Designed to maximize safety Separate heating controls for each position Temperature range to 450°C Stirring speed: 50 to…

  • Standard Glass Microfiber Extraction Thimbles

    GE Healthcare

    603G Glass fiber thimble with inorganic binder Designed to fit most commercially available Soxhlet extractors No binders are added Available in a range of sizes and wall thicknesses to suit your application Thimbles of type 603G are made from borosilicate glass fibers with…

  • Soxhlet Extraction Apparatus with Heating Mantle

    United Scientific Supplies

    This unique set includes matched components to provide a convenient Soxhlet extraction workstation. The setup includes a heating mantle with stirrer, 250ml borosilicate glass boiling flask, 100ml borosilicate glass Soxhlet extractor, 300mm borosilicate glass Allihin condenser with glass connectors,…

  • SYNTHWARE Allihn Reflux Condensers

    Kemtech America

    Allihn Reflux Condenser with a water cooled inner drip tip at the bottom for Soxhlet Extractors. Joint Size: Available in 34/45, 45/50, and 55/50 Jacket Length: Available in 190, 260, and 300mm.

  • KIMAX SOXHLET TYPE EXTRACTORS

    DWK Life Sciences (Kimble)

    With Standard Taper Joints Complete with Allihn condenser with joint at bottom, Soxhlet extraction tube with top and bottom joint and flat-bottom flask Available in small, medium and large capacities Small Extractor with 125 mL flask (4406E10, E16, E22) Extraction chamber 30 mm i.d. x 95…

  • Soxhlet Extraction Apparatus Flasks

    DWK Life Sciences (Wheaton)

    Flat-bottom flask for Soxhlet Extraction Apparatus 1/Case

  • PYREX Accelerated One-Step Extractor/Concentrator

    Corning

    Modular PYREX Accelerated One-Step extractor-concentrator performs extraction, concentration, and drying with the same apparatus and is designed for use with solvents of heavier specific gravity than sample being extracted.  Extraction and concentration can be done in 1/3 of the time.…

  • Extra Large Soxhlet Extraction Apparatus

    Wilmad LabGlass

    This borosilicate glass X-Large Soxhlet extraction apparatus is used for the continuous extraction of solids with a suitable solvent. Complete units are supplied with a round bottom boiling flask (LG-7220-184 or LG-7220-188), a Soxhlet extraction tube (70mm or 100mm approx. I.D.) and an Allihn…

  • Giant Extraction Apparatus, Soxhlet

    Ace Glass

    Complete with bulb type condenser and one flask. Cycling rates may be doubled over conventional style extractors. All joints are interchangeable. The 82" size is supplied with adapter for connecting the extractor and condenser. This is necessary because of the extremely large top joint on the…

  • Glass Extraction Thimble Filters

    Advantec MFS

    High purity, seamless thimble filters offered in 5 materials. Applications include analysis of fats, oils, grease, pesticides, pollutants, organics and addititives in plastics and rubbers. Glass Fiber thimbles are made of pure borosilicate glass microfibers. These binder-free filters can…

  • Micro Soxhlet Extraction Apparatus

    DWK Life Sciences (Wheaton)

    Used for continuous extraction of analytes from a solid into an organic solvent WHEATON Connection eliminates the need for hooks, springs and clamps common to standard ground joint designs As the flask containing the solvent is heated, vapors rise in the larger outside tube, enter the…

  • 125 ml App, Soxhlet Extraction, Gnd

    DWK Life Sciences (Wheaton)

    Use this apparatus for continuous extraction of analytes from a solid into an organic solvent. As the flask containing the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate. When the liquid level in the extractor reaches the top of the bent…

  • Extraction Apparatus, Soxhlet, with Friedrichs Condenser

    Ace Glass

    Improved design of ACE extractor with Friedrichs Condenser in place of Allihn Condenser. Complete consists of flask cap, condenser, extractor, and flask.

  • Extractor, Soxhlet

    Ace Glass

    Soxhlet extactor body with standard taper outer joint at top and 24/40 standard taper inner joint at bottom.

  • Extraction Apparatus, Soxhlet Improved Design

    Ace Glass

    The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.

  • 500 ml App, Soxhlet Extraction, Gnd

    DWK Life Sciences (Wheaton)

  • 250 ml App, Soxhlet Extraction, Gnd

    DWK Life Sciences (Wheaton)

  • Borosil® Complete Soxhlet Extraction Apparatus with Allihn Condenser

    Foxx Life Sciences

    In collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North…

  • Extractor, Soxhlet, with Stopcock

    Ace Glass

    Extractor body only, with stopcock for withdrawing samples from extraction chamber. Can be used interchangeably with the standard Soxhlet extraction apparatus.

  • Micro Soxhlet, Improved Design

    Ace Glass

    Designed for small chemical applications. Improved design permits greater condensing capacity. Condenser approximately 139mm jacket length. Joint between condenser and extractor is 24/25. Flask joint is 14/20. Designed to accommodate paper thimble, size 10 x 50 mm. Flask is 30mL capacity. Hose…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.