Corning, Supplies, Non-Sterile
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…
-
Meets 384 well microplate standards for automation Low water absorption of polymer prevents loss of protein drop volume The CrystalEX 384-well is the only microplate designed for full automation in crystal screening, built to meet industry standards for 384 well microplate footprint and…
-
Pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. These “to deliver” pipets must be blown out to obtain total rated capacity. Reference: ASTM E-1044.
-
96 Well Half-Area Assay Plates
CorningSaves reagents Fits standard readers Polystyrene Unique half-area plates achieve assay miniaturization without using 384 well plates. Half-area plates can help save on rare and expensive reagents by reducing the amount of reagent needed per well, while still retaining the ability to be read in…
-
Thermowell® 96 well polycarbonate PCR microplates fit the most commonly used thermal cyclers. For oil-free operation, plates must be used with sealing tape or a sealing mat and used in conjunction with thermal cyclers that have heated lids. DNA-BIND Thermowell® M PCR plates can be used…
-
Features low background fluorescence and minimal light scattering Reduces well-to-well crosstalk Conforms to standard microplate footprint and dimensions Working volume of 25 to 125 µL 96 well half-area NBS microplates use Corning's proprietary treatment technology for nonbinding surface on…
-
Treated or non-treated surface models Black or clear versions Can be used for both top and bottom reading instruments 96 Half-Area Well microplates are available in a range of configurations. Bottoms are 60% thinner than conventional polystyrene plates resulting in lower background fluorescence…
-
Color-coded Calibrated “to deliver” Graduated PYREX pipets are designed for cotton plugging. The uniform top-end openings permit performing of plugs and allow precise control of liquid column. Color-coded by size for easy identification and sorting. Colored graduations in…
-
-
Identical to 9215F20 series, but with marking spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass,…
-
Exceedingly rigid and flat plate for consistent automated handling Plate withstands repeated freeze-thaws down to -20°C Low retention polypropylene and round-well design give low residual volumes after pipetting (<0.1 µL) Raised well edges and flatness for heat or adhesive…
-
Stripwell™ Low Volume Microplates are designed with one-half the well area of a “regular” 8-well strip, providing a much greater surface to volume ratio.Low volume wells have recommended working volume of 50 to 125µLDesigned for in vitro diagnostic assaysFlat bottom strips…
-
96 Well Half-Area Assay Plates
CorningSaves reagents Fits standard readers Polystyrene Unique half-area plates achieve assay miniaturization without using 384 well plates. Half-area plates can help save on rare and expensive reagents by reducing the amount of reagent needed per well, while still retaining the ability…
-
Designed for sitting drop crystallization Meets 96 well microplate standards for automation Low water absorption of polymer prevents loss of protein drop volume Microplate is manufactured from an advanced polymer with high resistance to commonly used solvents, including acetone,…
-
Raised well rims Comes with high binding, TC-treated or non-treated surface Built to proposed industry standard footprint These solid black and white, opaque polystyrene plates are tested on a lot-to-lot basis for capacity and low fluorescent/ luminescent background. Plates have…
-
Reduces non-specific-binding of compounds to micro wells Polypropylene construction Round bottom design Non-sterile The black and white polypropylene assay plates are an ideal platform for fluorescence and luminescence assays that have a compound non-specific-binding problem…
-
Fluorescent and luminescent assays Raised well bottoms for higher sensitivity Flood reservoirs reduce contamination Corning® 1536 well microplates are the highest density microplates available for high throughput screening while conforming to standard microplate footprint and…
-
Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…
-
Disposable Tissue Culture Tubes
CorningScrew cap, flat bottom, borosilicate glass (9215J30 and J50) Suitable for tissue culture and routine bacteriological work Flat bottom allows tube to stand unsupported 9215J30 tube takes size 15-415 cap; case of 1,000 contains four packages of 250 9215J50 tube takes size 18-415…
-
150 mL Tube Top Filter
CorningFilter directly into centrifuge tubes Sterile, individually packaged Certified non-pyrogenic Minimizes contamination Low protein binding, 50 mm diameter cellulose acetate (CA) membrane, recommended for use with samples requiring highest protein yields. Eliminates unneccesary…
-
Dimensional stability Automation compatible Polypropylene construction 384 well PCR microplates feature a rigid construction that is ideal for automation. Uniform wall thinness assures efficient heat transfer while minimizing well-to-well variability. Microplates are 100% tested for well…
-
These disposable 20x125mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 24 mL, are made from borosilicate glass, bulk-packed and are sold…
-
Superior performance compared to competitor plates: Lower CVs, higher signal-to-noise ratios, and Lower background fluorescence Processed for superior flatness with minimal variability within plate and between plates Non-sterile Without lid
-
Black, flat bottom Nonbinding surface 360 µL well volume Bottoms are 60% thinner than conventional polystyrene plates, resulting in lower background fluorescent and enabling readings down to 340 nm. Microplates are designed to reduce well-to-well crosstalk during…
-
Half-, full- or elevated skirt 200 µL well volume Certified DNase- and RNase-free Thermowell and Thermowell® GOLD 96-well PCR microplates feature a rigid construction that is ideal for automation. Thermowell GOLD 96-well PCR microplates are offered in five formats to maximize flexibility. The…
-
Conical flat bottoms 1 Protein well 1 Reservoir The 96 wellCOC Protein Crystallization Microplate features 1:1, 4 µL conical flat bottom wells treated for hydrophilicity. Each well contains one 4 µL conical flat bottom protein well and one 100 µL reagent…
-
These Costar® low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…
-
Excellent signal dynamic range due to low background fluorescence and enhanced signal intensity Superior flatness minimizes variability within a plate and between plates Flat bottom wells are compatible with automated dispensers including the PerkinElmer FlexDrop™ NBS…
-
Sterile or non-sterile versions Solvent-resistant Untreated surface Microplate is resistant to many common organic solvents (e.g., DMSO, ethanol, methanol). Plates offer total well volumes of 180 or 240 µL. Certified DNase- and RNase-free, they are available in sterile and…
-
White wall plates are designed to reduce well-to-well crosstalk during luminescent assays Recommended working volume of up to 20 to 80uL Enhanced flatness provides low intra- and inter- plate CV’s Nonbinding (NBS) surface is a Corning proprietary treatment technology used on…
-
1536 Well Black with Clear Flat Bottom Polystyrene NBS Microplate Compatible with standard readers and automation Compatible for bar coding Superior performance compared to competitor plates: Lower CVs, higher signal-to-noise ratios, and lower background fluorescence NBS surface can reduce…
-
Black with clear flat bottom Working volume 5-40 µL Round well design reduces wicking Non-binding (NBS) surface is a Corning proprietary treatment technology used on polystyrene microplates to create a non-ionic hydrophilic surface (polyethylene oxide-like) that minimizes molecular…