Corning, NEW! Life Science
-
Axygen® Axypet® Pro Pipettors
CorningAxygen Axypet Pro Pipettors have been engineered to provide the highest levels of comfort, accuracy, and precision. The lightweight construction, contoured handle, and 4-digit counter were designed to ensure comfortable pipetting. All pipettors feature smooth plunger movement and extremely low…
-
These PYREX® tissue grinders (homogenizers) are recommended for soft tissues found in the liver and brain. They are designed to handle both initial grinding and final homogenization in the same sequence of operations. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene…
-
These PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action…
-
Horizontal Gel Boxes
CorningAxygen horizontal gel boxes are high-quality, full-featured units designed for exceptional durability and efficiency. The gel boxes feature leak-free external gel casting, which allows you to cast one gel outside of the box while another gel is running inside. The units are available in four…
-
PYREX Hybridization Tubes
CorningFor use in hybridization incubators with rotators Three sizes Include GL 45 plug-seal screw caps Graduated A convenient method which requires smaller probe solution volumes. Three lengths (100, 150 and 300 mm) fit most popular hybridization apparatus. Caps have silicone O-rings…
-
This 2.4L PYREX® desiccators has a rugged 24/29 Standard Taper external sleeves with tooled hose connections that serve as the stopcock. It is designed so that its manipulation is not affected by the vacuum. The open position is indicated by the molded arrow on the cap. A quarter turn from this…
-
This PYREX® extractor body with a 45/50 Standard Taper outer top joint and a 24/40 Standard Taper inner bottom joint is a replacement for the One Piece Continuous Heavier than Water Liquid/Liquid Extractor System.
-
PYREX Cloud & Pour Test Jars
CorningFor ASTM D-97, D-1500, D-2500 Cylindrical with flat bottom, beaded rim and marking spot Height 121 mm; o.d. 35 mm With graduation ring 51 mm from bottom
-
Single Block, 24 x 1.5 ml tubes
CorningThis is a single block, 24 x 1.5 mL tubes, for use with Corning® LSE™ Digital Dry Bath Heater.
-
High throughput extraction of viral nucleic acid (RNA and DNA) from biofluids. Viruses, such as SARS-CoV-2 (COVID-19), can cause serious health issues and play an important role in molecular biology and biomedical research. Having the right tools is critical for scientific discovery for…
-
This 2.4L PYREX® desiccators is designed for general analytical work. The sturdy knob makes the cover easy to handle. Approximate bowl volume is 2400mL. For replacement cover, see No. 3081-150CO. For lower part only, see No. 3081-150LO. Warning: Do not heat or subject to pressure. Not for…
-
PYREX Soxhlet Extractors
CorningIncludes an efficient Friedrichs condenser An efficient extraction apparatus for general purpose use Consists of an extractor, a special Friedrichs condenser and a flask, all equipped with Standard Taper joints Condenser tubulation o.d. is 10 mm for 3/8 inch i.d. tubing
-
Corning® Lambda™ EliteTouch™ pipettors have been engineered to provide the highest levels of ergonomics, accuracy, and precision. Lightweight construction, contoured shape of the handle, and 4-digit counter were designed to ensure comfortable pipetting. All pipettors feature smooth…
-
Gel Documentation Systems
CorningAxygen® Gel Documentation systems easily capture publication quality, 16 bit TIFF images. The systems are quick to set up and have an intuitive user interface for image capture, annotation, and contrast adjustment. Images are easily saved and opened in common gel analysis software for more…
-
These PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will…
-
These Corning® hot plates have a durable glass-ceramic Pyroceram® 4 x 5 inch top and offer superior performance and reliability in a low profile, space-saving design. They operate on 100V/60Hz to meet needs in Japan and other locations with similar requirements. -Easy-to-read numbers simplify…
-
The Corning LSE Mini Microcentrifuge is a personal bench top instrument that operates at a fixed speed of 6,000 rpm (2,000 x g) and was designed for quick spin downs of micro-samples. Operation is made simpler and more convenient with the design of a quick-release rotor system and electronic brake.…
-
Corning® Boss Head Support Clamp
CorningCorning offers a 2" long right angle black anodized aluminum Boss Head clamp that will accept up to 7/16" diameter support rods. It is designed to be used with the Corning Temperature probe support clamp (Cat. No. 440141).
-
PC-200 Series Hot Plates
CorningSuperb linear control Minimum heat up times Low-profile; requires less space Meets testing standards for electrical safety Temperature range: 25 to 550°C Features Pyroceram® top for uniform heating Improved design offers sealed electronics which protect the unit and reduce maintenance costs.…
-
Digital temperature and speed displays External temperature control Closed-loop control Hot plate stirrers use microprocessor-controlled feedback technology to maintain consistent stir speed and temperature. Digital temperature display is adjustable in 5°C increments and indicates…
-
This PYREX® general purpose condenser can be used for either distillation or extraction. Although the condensing area per unit length of the 200mm long jacket is low, the large capacity water jacket gives efficient cooling. Condenser tubulations are approximately 10mm O.D. The adapter end is…
-
Organoid Counting Software
CorningBy purchasing the software extension, customers will be able to accumulate concentration in orgs./mL and collect surface area data in micrometers squared of their 3D cell cultures; a feat that existing standalone brightfield cell counters simply cannot offer. At launch, we are introducing 2…
-
LSE™ 71L Shaking Incubators
CorningThis high performance shaking incubator has a full size glass door and internal light that allows easy viewing of samples without disturbing the chamber contents. Mechanical convection provides a safe, stable temperature environment and fast chamber temperature recovery after opening the door. The…
-
This specially designed PTFE condenser jacket is a replacement part for the PTFE Cyanide Distilling Apparatus (Thomas No. 0320A91)
-
PYREX® Liebig Condensers
CorningSuitable for the use in vacuum distillations With Standard Taper drip tip joint at bottom and Standard Taper outer joint at top The 8” condenser has Standard Taper 19/38 joints; others have 24/40 joints
-
These motor-driven PYREX® tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. The clearance between the ground tube and pestle is approximately 0.15mm. The parts are ground to a medium grind to insure adequate abrasive qualities, yet…
-
Modular PYREX Accelerated One-Step extractor-concentrator performs extraction, concentration, and drying with the same apparatus and is designed for use with solvents of heavier specific gravity than sample being extracted. Extraction and concentration can be done in 1/3 of the time.…
-
These PYREX® desiccator cover sleeve rings are replacements for 2.2L desiccators No. 3118-160.
-
The Axygen Axyspin refrigerated microcentrifuge is a high-performance refrigerated microcentrifuge designed to quickly process samples for applications such as nucleic acid and protein preparation, purifications, extractions, and pelleting. Powerful refrigeration system cools to 4°C in…
-
Kuderna-Danish Concentrator
CorningWidely used to concentrate samples, particularly pesticides and other pollutants prior to instrumental analysis Includes a two- or three-ball Snyder column, a flask and a spring-mounted collection tube for convenient access to samples Complete apparatus consists of a Snyder column 150 mm…
-
LSE™ Benchtop Shaking Incubators
CorningTruly a benchtop style, the lid on the Corning benchtop shaking incubator has a low pivot point which provides a space-saving size sure to fit on the lab bench and under shelves. Each unit includes a software package, which provides the option of saving data to an external computer or monitoring…
-