Gel Casting Tray

…(long) UVT gel casting tray for use in the JSB-302 Double-Wide Mini Gel-O Submarine system Ideal for saving agarose when shorter gel runs are sufficient This Gel Bed mates with the CS-3210 casting fixture for pouring agarose gels Constructed of 3/16" thick, OP-4 Cast Acrylic to allow…

The IB57020 is a UVT casting tray designed for use in the IB57000 (HR2525 Horizontal Electrophoresis System). It is constructed of OP-1 grade cast acrylic to allow the passage of UV light during the viewing the elecrophoresis gel run. This tray produces a gel measuring 25x25cm, and has 4 equal…

IBI's CS-3210 Casting Fixture Tray is an accessory for JSB-302 Double-Wide Mini Gel-O Submarine system. It's built to hold and seal the GB-3210 - 15cm (wide) x 10cm (long) Gel Bed, during the pouring of agarose gels This fixture seals both ends of the gel bed and once the agarose…

Replace your UVT gel tray, gaskets and external casters with Thermo Scientific™ Owl™ EasyCast™ B1A Mini Gel and A2-OK Multi Gel System Replacement Parts, for use with EasyCast B1A and A2-OK Multi Gel Mini Gel Systems. External caster only Tray not included

Multichannel Performance Labnet's ENDURO™ Gel XL includes all components necessary to cast and run horizontal gels: gel trays, combs, casting stand, gel tank and digital power supply. The migration tank, gel trays and multichannel combs are molded for leak-proof performance and a…

…durability and efficiency. The gel boxes feature leak-free external gel casting, which allows you to cast one gel outside of the box while another gel is running inside. The units are available in four different sizes, and each unit comes with two sizes of gel trays. In addition, they have easy to…

…dripping directly onto the gel. EASE OF USE Casting gels for the ENDURO™ system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place.…

…dripping directly onto the gel. EASE OF USE Casting gels for the ENDURO™ system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place.…

…dripping directly onto the gel. EASE OF USE Casting gels for the ENDURO™ system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place.…

…prevents it from dripping directly onto the gel. The Enduro system makes casting gels easy. Simply snap the rubber gates onto the ends of the tray, place the combs in position and pour the gel; no taping is necessary. Slots on the sides of the gel trays hold the combs in place. The two-piece…

Simply melt the prepared agarose in a water bath or microwave. Pour into a gel casting tray, allow the molten agarose to solidify and run your gel. 0.8% Agarose 200mL – Resolves DNA fragments 0.6-35kb long DOT Info: Non-regulated

Simply melt the prepared agarose in a water bath or microwave. Pour into a gel casting tray, allow the molten agarose to solidify and run your gel. 2.0% Agarose 200mL – Resolves DNA fragments 0.1- 5kb long DOT Info: Non-regulated

Simply melt the prepared agarose in a water bath or microwave. Pour into a gel casting tray, allow the molten agarose to solidify and run your gel. 1.0% Agarose 200mL – Resolves DNA fragments 0.5-20kb long DOT Info: Non-regulated

…wall comb measuring 1.5 mm x 230 mm, is suitable for use with D3-14, A6 and A3-1 wide gel horizontal electrophoresis systems. Used in the UVT gel tray to cast smaller gels using the existing gel tray and the comb slots Can be secured by various methods to ensure a leakproof seal, including…

…cast acrylic . for years of dependable service. The JSB-30 also provides the user with the . option of running different length trays. There . are two accessory gel trays and casting fixture . trays offered for use in the JSB-30. One tray is . 5cm long and the other tray is 7.5cm long. These trays…

…of the gel box. Trays and casting stands for both 10.5 x 6cm and 5 x 6cm gels are included with the Band-It Mini system, as are double-sided combs. The smaller tooth combs are compatible with multichannel pipettes. Casting is quick and easy – just place the tray in the casting stand and…

…supply and two casting sets, including gel trays and combs. Act now, and get this entire starter kit (with agarose, balance and weigh boats) for the price of the myGel system. Starter Kit includes: myGel™ Mini Electrophoresis System (Gel box, power supply, 2 casting sets, 4 combs)…

…gel box. Trays and casting stands for both 10.5 x 6cm and 5 x 6cm gels are included with the myGel Mini system, as are double-sided combs. The smaller tooth combs are compatible with multichannel pipettes. Casting is quick and easy - just place the tray in the casting stand and pour. The trays…

… Three point leveling ensures flat, even gels Leak-resistant gasketed end gates Durable, acrylic gel casting system has an UV transmissible gel tray that allows users to view bands on a transilluminator without removing the gel from the tray. This tray, with its ample running length, can run four…

…7x7cm Casting tray with embossed gel ruler & rubber end caps (2) 8/10 comb combo (2) Six tooth comb *It allows two 7x7cm gel trays to run simultaneously on one apparatus. EL-100-16 Set includes: (2) Electrophoresis apparatus, including (2) 7x14cm casting trays (Item No.…

…UVT gel tray can withstand hot agarose (as high as 60°C) during casting. There are no tape, casting dams or other accessories required to cast gel. Safety interlocking lid features attached three foot long power supply leads. Each system features the all-in-one EasyCast gel casting system…

…with everything needed to cast, run and view mini electrophoresis gels, including an integrated power supply. One large (10.5x10cm) or small (10.5x6cm) gel is accommodated by the gel tank. Gels are easily poured using the supplied trays, combs and leak-proof casting stand. The power…

…All-in-one EasyCast gel casting system allows the gel to be cast and run in the same unit. No tapes, casting dams or other accessories are required. UV Transmissable (UVT) gel tray allows user to view bands on a transilluminator without removing the gel from the tray. The tray can withstand hot…

…and is ideal for running all types of precast gels. The large format can run gels in less than 30 minutes. This System Comes Complete with: Buffer Tank Patented Vented Lid IB57020 UVT Casting Tray IB57030 Casting Fixture Four, 2.0mm x 50-tooth combs Power…

…of 3/8" cast acrylic to provide years of trouble-free service. Withstands high voltage and high temperatures and will not warp or crack like molded units do. This System Comes Complete with: Buffer Tank Patented Vented Lid IB56020 UVT Casting Tray IB56030 Casting Fixture Two,…

…cast acrylic, the JSB-302 is designed to provide years of continuous service. The JSB-302 offers the user three different length gel trays. The 10cm long tray comes with the unit and the 7.5cm and 5cm long trays can be purchased separately, along with their corresponding casting fixture tray.

…Patented Vented Lid IB51020 UVT Casting Tray IB51025 Casting Fixture Two, 1.5mm x 8-tooth combs Power Cords Bubble Level With Next Generation Sequencing Tray multiple libraries of samples may be run simultaneously wtihout contamination between lanes. This tray has 3 lanes with solid acrylic…

… IB53020 UVT Casting Tray IB53030 Casting Fixture Two, 2.0mm x 16-tooth combs Power Cords Bubble Level Buffer ports With Next Generation Sequencing Tray multiple libraries of samples may be run simultaneously wtihout contamination between lanes. This tray has 5 lanes with…

…Ready-to-load samples For 6 gels Agarose gel electrophoresis is a powerful analytical method for the separation of biomolecules. The Principles and Practice of Agarose Gel Electrophoresis kit, 4313B01, demonstrates the basic procedures, including gel casting and sample application and…

…models. All models include a non-slip mat, and most models are available with a stacking tray option. Applications Mixing Blood Samples, DNA Extractions, Blotting Techniques, Staining and Destaining Gels, Hybridizations Display Easy-to-read, independent LED displays for speed, tilt…

…destaining gels, hybridization procedures, hematology, and blotting techniques. Ordering Information : Units include a 92” (234cm) detachable, 3-wire cord and plug. Units are also supplied with a 14 x 11” (35.6 x 27.9cm) non-skid rubber mat. Two-tier models include a 2nd tray,…

…environmental conditions Operating Features: Low Profile Design: Takes up less space and easily fits into most fume hoods and incubators. Cast aluminum base offers durability and added stability. Microprocessor Control: The microprocessor control provides electronic tilt angle…