Corning, Burets
-
Single use culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from…
-
Widely used and referenced in laboratory protocols Dual position snap-cap prevents sample loss with ease of handling Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile) The foundation for consistent research…
-
PYREX® VISTA Test Tubes
CorningBeaded rim These test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25mm tube does not have a marking spot.
-
PYREX Class A Burets
CorningSerialized Colored scale Teflon® stopcock plug The capacity tolerance on Class A PYREX burets is established by ASTM E-287 and is calibrated in accordance with ASTM E-542 and D-511. Each buret is individually serialized and supplied with a Certificate of Identification and Capacity, traceable…
-
PYREX® Oil Centrifuge Tube
CorningGraduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…
-
Tube 10mL Self Stand Screw Cap
CorningSkirted, self-standing tubes with a conical bottom Graduated at 1.0mL intervals and feature a large frosted writing area Caps fit tubes securely for a leakproof seal Sterile tubes come with caps attached
-
Plastic Caps With Teflon Liners
CorningAs supplied with 9212K21 series test tubes, with Teflon over-liner Cap size shown is GPI thread-finish
-
PYREX Class A Burets
CorningPrecision bore tubing assures uniform accuracy between any two points on the scale With Standard Taper 2 straight glass stopcock Supplied with plastic dust cap Durable colored graduations are sharply defined and easy to read. Carefully ground Standard Taperstopcock gives precise…
-
Identical to 9215F20 series, but with marking spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass,…
-
Corning® 50mL Mini Bioreactor
CorningFeatures and Benefits Polypropylene tube with large marking spot to clearly identify tube contents and experimental parameters Polypropylene cap with 4 vents; hydrophobic membrane provides gas exchange Sterile, nonpyrogenic and RNase-/DNase-free .
-
Tube 10 ml
CorningThese 10mL PYREX® conical centrifuge tubes are used in connection with the Wasserman test. Also used to measure H2O content and potassium ions in oil muds. API RP 13B standard testing method. They are graduated in 0.1 mL divisions up to 4 mL, and 0.2 mL divisions from 4 to 10 mL …
-
These 50mL PYREX® conical centrifuge tubes have white enamel graduations and are graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50 in 1mL divisions. The No. 16 Standard Taper pennyhead stopper is solid glass.
-
For use in educational laboratories where Class A accuracy is unnecessary Made from uniform bore tubing, with red graduations which are permanently fused onto the glass and remain sharply legible Straight glass tip stopcock with 2 mm bore Teflon stopcock plug; supplied with plastic dust cover
-
Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.
-
Widely used and referenced in laboratory protocols Dual position snap-cap prevents sample loss with ease of handling Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile) The foundation for consistent research…
-
PYREX® Folin-Wu Digestion Tubes
CorningFabricated from specially selected tubing for product durability. Engraved white-filled graduations at 25 and 50 mL .
-
Centrifuge Tube 15 ml
CorningThese 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI…
-
Buret 250 ml
CorningThese 250mL PYREX® burets are suitable for use in school and institutional laboratories not requiring the accuracy of our Class A models. They are used when dispensing large volumes of liquids rapidly and accurately. Made from close tolerance, accurate bore tubing with uniform walls,…
-
These 100mL PYREX® conical centrifuge tubes have white graduations and are used in accordance with standard methods of testing for water and sediment in petroleum products. These tubes are graduated upward to 0.5mL in divisions of 0.05mL; from 0.5mL to 2mL in divisions of 0.1mL; from 2mL to 3mL…
-
Skirted, self-standing tubes with a conical bottom. Tubes are graduated at 1.0mL intervals and feature a large frosted writing area. Caps fit tubes securely for a leakproof seal. Sterile tubes come with caps attached. Transport tube comes with a blue cap Certified RNase, DNase, and…
-
These PYREX® ignition tubes are made from No. 7740 glass and are satisfactory for most applications encountered in school work where temperatures above 600°C are not required. These rimless tubes perform well when continually used at temperatures up to 500°C, or for short periods to 600°C.
-
Axygen Brand 50mL Screw Cap Centrifuge Tubes are designed to meet the needs of your laboratory. Made of durable polypropylene homopolymer, these tubes can withstand forces up to 12,000 RCF. Printed in two colors with a large writing surface. Centrifuge Rated to 12,000 x G Easy one hand…
-
Axygen microcentrifuge tubes feature a screw cap that provides a tight secure seal. Screw cap tubes are available in a variety of colors with a conical or self-standing bottom. Sterile options are also available.Maximum G-force is 20,000 RCF.RNase-/DNase-freeNonpyrogenicTubes, with Cap, SterileAll…
-
Buret 50 ml Auto
CorningThese 50mL PYREX® burets have an automatic zeroing device and dual Rotaflo® stopcocks for easy controlled filling. Greaseless Rotaflo® stopcocks allow smoother control and help eliminate titrating errors
-
Centrifuge Tube 12 ml
CorningThese 12mL heavy-duty PYREX® conical centrifuge tubes are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and…
-
1.1ml Polypropylene Mini Tubes
CorningAxygen® 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Available in 0.65mL single MiniTube or 1.1mL single MiniTube and 8-tube or 12-tube strip…
-
Tube 40 ml
CorningThese heavy duty 40mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity these…
-
-
These 50mL PYREX® conical centrifuge tubes have sharp, black enamel graduations and markings. The tubes are the same size and shape as our Nos. 8060 and 8080. They have precision formed tips and uniform walls throughout for a high degree of accuracy and mechanical strength.
-
For 9195R10 series plant tissue culture tubes Autoclavable caps available in natural or orange color. Two positions: closed, for humidified environments; and open, for gas exchange. Drip ring minimizes contamination. Flexible interval ribs hold cap firmly in place.
-
Meet bioanalytical-grade requirements and provide unsurpassed performance in critical research applications Exceptionally strong—Industry leading centrifugation rating of 16,000 RCF (50 mL polypropylene) Unique double threaded cap design reducing cross threading and leakage …