Polywipe-C Heatseal Wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning. The wipes are laundered and…

PROSAT® Wipes with CyQuanol™ are intended for Life Science cleanroom manufacturers who want to effectively maintain cGMP compliance by maximizing efficiency and minimizing inconsistency in their contamination control process. PROSAT Polynit Heatseal Wipes with CyQuanol are manufactured…

Contec’s Anticon Gold StandardWeight wipes are made from 100% continuous filament polyester with a double-knit interlock construction. Anticon Gold StandardWeight uses patented textile technology to achieve superior sorption characteristics for critical applications. The proprietary sealed…

Canister for SATWIPES® 6" x 9" (15.2 x 23 cm) rolls saturated with IPA less (CSCN0050) or greater (CSCN0100) than 70% with reinforced snap-close lid, replacement part   Contec, Inc. products are intended for sale/shipment within North America only. International…

PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the…

Contec’s ReFIBE wipes are made from 100% recycled plastic bottles making them a sustainable single-use option for critical manufacturers in the Life Sciences, Pharmaceutical, Medical Device, and Semi-Conductor industries. The revolutionary recycling process converts post-consumer plastic to…

Anticon Sterile Gold Sorb is a unique wipe which combines the performance of a microfiber yarn with that of a polyester yarn to create a wipe with superior wiping and sorptive characteristics. The proprietary sealed edges of these wipes, combined with high sorptive capacity, make them particularly…

Anticon Gold Sorb is a unique wipe which combines the performance of a microfiber yarn with that of a polyester yarn to create a wipe with superior wiping and sorptive characteristics. The proprietary sealed edges of these wipes allow the use of 100% of the wipe for cleaning without the worry of…

PROSAT® Sterile™ Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in…

PROSAT® Sterile™ Polynit Heatseal Vial Wipes are made from 100% knitted polyester presaturated with a blend of 70% IPA and purified water. The polyester wipe generates a low level of particles and fibers so is ideal for use in product contact areas, reducing the risk of product…

PROSAT® Wipes with CyQuanol™ are intended for Life Science cleanroom manufacturers who want to effectively maintain cGMP compliance by maximizing efficiency and minimizing inconsistency in their contamination control process. PROSAT Meltblown Polypropylene Wipes with CyQuanol provide a…

Anticon® MicroQuilt combines the cleanliness and sorbent capacity of Quiltec® with the microfiber particle pick-up ability of Anticon® Gold Sorb. This hybrid creates the most sorbent, cleanest wipe Contec offers. MicroQuilt is laser-cut with heatsealed edges and cleanroom laundered…

Sontara® Aircraft Wipes Sontara AC is a white nonwoven creped wipe made with 55% special cellulose and 45% polyester. Sontara AC wipes offer extremely low lint, high strength, good absorbency and versatility. Ideal for a wide range of critical cleaning tasks essential to industries such as…

Contec's Anticon 100® HeavyWeight™ wipes are made from 100% continuous filament polyester with a double-knit no-run interlock construction. The clean cut edges create a very soft wipe, where the whole of the wipe fabric can be used with no risk of scratching. The wipes are cleanroom…

Contec's Anticon 100® HeavyWeight™ wipes are made from 100% continuous filament polyester with a double-knit no-run interlock construction. The clean cut edges create a very soft wipe, where the whole of the wipe fabric can be used with no risk of scratching. The wipes are cleanroom…

Contec’s Anticon Sterile Gold is made from Anticon Gold HeavyWeight wipes. They are made from 100% continuous filament polyester with a double-knit no-run interlock construction. Anticon Sterile Gold uses patented textile technology to achieve superior sorption characteristics for critical…

MicroGenesis™ delivers the maximum amount of microfiber to pick up and retain particles dust and other contaminants in cleanrooms and other critical applications. For dry applications where particle pickup and retention is critical MicroGenesis delivers unprecedented performance.  The…

TuffStuff are high quality critical task wipes. Available in light, medium and heavy duty, these wipes are solvent resistant and maintain their strength even when wet. TuffStuff wipes offer exceptional durability and cleanliness. TuffStuff Wipes are available in multiple sizes, weights, and…

Contec's PROSAT Presaturated Wipes feature polypropylene, polyester or polyester/ cellulose nonwoven wipes presaturated with IPA and DI Water blends in flat re-sealable pouches individually lot-numbered for traceability. These specially designed pouches preserve cleanliness and solvent…

Sporicidin Disinfectant is an EPA registered intermediate level disinfectant that delivers a broad-spectrum kill that cleans, disinfects, and deodorizes. Sporicidin offers continuous bacteriostatic residual activity for up to 6 months. Alcohol-free, it is compatible with plastics, treated…

PROSAT® Sterile™ Polywipe-C Heatseal Wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning.…

These PROSAT ® Sterile ™ wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general surface cleaning, PROSAT ® Sterile ™…

These PROSAT® Sterile™ Theta™ Wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT®…

Contec’s PROSAT® Sterile™ Polypropylene Low Endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. …

The Polynit Wipe is made from filament polyester and is knitted in a special stitch which reduces degradation of the wipe and subsequent particle generation. The Polynit Wipe is specifically designed for ISO Class 5 or cleaner environments and is exceptionally low in particles and extractable…

Nonwoven hydroentangled polyester/cellulose blended wipes Dispensed from center-pull roll in a reusable canister Presaturated wipe refills are available Strong and durable Low levels of particles and extractable contaminants Each package is individually lot numbered …

The Thermo Scientific Orion™ Contec fluoride analyzer is mainly used in research facilities and chemical laboratories to conduct fluoride analysis. It helps in early fluoride detection and ensures reduced time consumption for analysis. It is convenient to use and easy to install. Meets CE, CSA, UL…

PROSAT®, Quiltec® I wipes, presaturated with 70% IPA/30% DI Water, 12" x 12" (30 x 30cm), sterile Contec, Inc. products are intended for sale/shipment within North America only. International customers should contact their local Contec, Inc. distributor to place orders for…

The Amplitude™ Lambda™ wipes is made from a nonwoven fabric comprised of a hydraulically entangled blend of 58% cellulose and 42% polyester staple fibers. The Lambda wipe is strong and durable, even when wet, and is low in particles and extractable residues. An excellent all-purpose…

Textured 100% polyester no-run knit wipes with heatsealed edges Laser-cutting seals fibers at wipe's edge and allows for 100% utilization of wipe Laundered and packaged in a ISO Class 4 cleanroom Extremely low in particles, fibers and non-volatile residues (NVRS) Good…

PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the…