Chemglass, Reaction Vessels
-
Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. For clamp…
-
Adapters, Beaded Pipe, Stainless Steel
ChemglassStainless steel transistion adapter from beaded pipe on the inlet/outlet of the reactor to M16 x 1 or M30 x 1.5 male. Used to connect fluid transfer hose to the vessel. Adapters require the beaded pipe couplings for connection to the vessel. Two are required per reactor.
-
Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Two side necks are vertical and two necks have a 10°; degree angle. Angled side neck is designed for use with CG-1235/CG-1235-B series angled distillation adapters. Lid has a flat ground surface allowing it to be greased or used with…
-
Reaction Vessel Lids, PTFE, 200mm
ChemglassReaction vessel lid is constructed entirely of PTFE. Low-form lid has eight openings: (A) center neck 1"; female NPT for PTFE standard taper adapter, (B) side necks 1-1/2"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10°; X 10°…
-
20L Process Reactor Sytems
ChemglassComplete reactor system on our NEW open air, auto-center stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…
-
Support Distillation Cart
ChemglassDistillation receiver carts for use with our 10L thru 100L reactor systems. Heavy Duty support cart can be used for round bottom flasks or cylindrical distillation receivers. Rear of cart incorporates 1/2” stainless steel lattice for mounting support clamps or accessories. Glassware can be…
-
Our unjacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…
-
Reaction Vessels, Spherical, Morton Type
ChemglassSpherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Vessel…
-
Reaction Vessel Lids, 3-Necks
ChemglassThree neck reaction vessel lid to fit CG-1930 through CG-1931 vessels. Side necks are on a 30° angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
PTFE Baffle Cage, 4-Blade
ChemglassPTFE Baffle Cage, 4-Blade, 100mm ID Flange, for 1,000mL Vessel. PTFE insertable 4-blade baffle cage system for CG-1929-X series 100 and 150mm reactor systems. Baffle assembly has 4ea PTFE rectangular baffles attached 90 degrees apart to a 100 or 150mm flange ring. Flange ring is inserted between…
-
Reaction Vessel Lids, PTFE, 80mm
ChemglassReaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 1/2"; female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 3/4"; female NPT with 10°; X 10°;…
-
75L Process Reactor Sytems
ChemglassComplete reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED USING THE CG-2077-H STIRRER BEARING. IF YOU…
-
Reaction Vessel Lid, S.S., 300mm, 7-Neck
ChemglassReaction vessel lid is constructed of 1/4"; thick #316 S.S. with a 1/8"; thick PTFE gasket underneath. The only materials exposed to the reaction are PTFE and Viton®;. Lid has seven openings that accept 45/50 outer PTFE inserts. Inserts are secured to the lid using glass filled PTFE…
-
ChemRxnHub™ Manifold System
ChemglassThe Chemglass manifold system for use with CG-1949-X ChemglassRxnHub™ frame system allows for easy and safe connection of your circulator to our glass process reactors. Manifold helps alleviate excessive mechanical forces placed on the glass vessel inlet/outlet. System is supplied complete as…
-
Features: Glass Body Features a Heavy Duty GL Style Glass Thread Auto-Stop When Opening the Valve Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve Zero Dead Space Perfluoro O-Rings on Tip and Plunger. …
-
Reaction Vessels, Jacketed, Benchtop
ChemglassFeatures: Chemically Resistant Perfluoro O-Rings On All CG-911-A And CG-511 Drain Valves Graduation Scale On Both Sides Showing the Approximate Volume Sidearm on Lower Drain Valve Can Be Used With a Standard 1/2 or 3/4in TFE, PFA or PP Compression Fitting All Vessels Are Serial…
-
20L Process Reactor Sytems
ChemglassComplete reactor system on our NEW open air, auto-center stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…
-
30L Process Reactor System
ChemglassComplete reactor system on our NEW open air stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can…
-
Similar to CG-1930, but with morton indentations to increase agitation during stirring. Supplied complete with two polypropylene hose connections and two screw caps. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum
-
Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. The unique design of the…
-
Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The #7 Chem-Thread will allow a thermometer or bleed tube having an O.D. of 4 to 7mm to be inserted vertically to the bottom of the vessel. Thread will accept CG-3504 adjustable immersion thermometers. Lid has a flat ground surface…
-
Cylindrical, jacketed, peptide synthesis reaction vessel having a coarse porosity fritted resin support. The vessel is constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the corresponding lids. Lower…
-
Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The 10/30 outer joint will permit a thermometer to be inserted vertically to the bottom of the vessel. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
100L Squatty Glass Reactor System
Chemglass100L Squatty, Low Profile, glass reactor system with 400mm flange. 100L glass reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. Complete 100L Squatty Reactor System Features: More…
-
Reactor Support Frame
ChemglassFeatures: Oversized Rugged 1" S.S. Pipe (1.315" OD) Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. All S.S. Uprights are Passivated to Inhibit Corrosion. Improved Support Clamp Auto-Centers Reactor and Lid,…
-
Jacketed Filter Vessel Body Only
ChemglassCylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Cooling jacket is equipped with 1"; beaded pipe or 30mm Tool-Free™;…
-
Cylindrical shaped tube useful for storage or simple reactions. Tube has a standard taper outer joint. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.
-
Reaction Vessel Lids, 4-Necks
ChemglassFour neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
1L ChemRxnHub™ Process Systems
ChemglassChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy…
-
Tool Set, Process Reactors
ChemglassPrecision crafted 17-piece tool set which includes a variety of tools to handle basic assembly, repair and maintenance on process reactor systems. Includes 1 each of the following: CG-1963-B-40 Plastic Tool Box, 19" W x 10" D x 9" H. …
-
Features: Glass Body Features a Heavy Duty GL Style Glass Thread. Auto-Stop When Opening the Valve. Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve. Zero Dead Space Perfluoro O-Rings on Tip and Plunger The CG-1968-GL…
-
Cylindrical shaped tube useful for storage or simple reactions with a standard taper outer joint at the top and a Chem-Vac™ Chem-Cap® valve sidearm. Plug may be removed for sampling from tube while a purge of inert gas is maintained through the sidearm. Valve size is as listed.